File: C:\M91449\Perso\RTWdsPIC\Developpements\Forum\resodad_john\myFolder\SDtroubleshooting\..\Microchip\MDD File System\FSIO.c /****************************************************************************** * * Microchip Memory Disk Drive File System * ****************************************************************************** * FileName: FSIO.c * Dependencies: GenericTypeDefs.h * FSIO.h * Physical interface include file (SD-SPI.h, CF-PMP.h, ...) * string.h * stdlib.h * FSDefs.h * ctype.h * salloc.h * Processor: PIC18/PIC24/dsPIC30/dsPIC33/PIC32 * Compiler: C18/C30/C32 * Company: Microchip Technology, Inc. * * Software License Agreement * * The software supplied herewith by Microchip Technology Incorporated * (the “Company”) for its PICmicro® Microcontroller is intended and * supplied to you, the Company’s customer, for use solely and * exclusively on Microchip PICmicro Microcontroller products. The * software is owned by the Company and/or its supplier, and is * protected under applicable copyright laws. All rights are reserved. * Any use in violation of the foregoing restrictions may subject the * user to criminal sanctions under applicable laws, as well as to * civil liability for the breach of the terms and conditions of this * license. * * THIS SOFTWARE IS PROVIDED IN AN “AS IS” CONDITION. NO WARRANTIES, * WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT NOT LIMITED * TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A * PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. THE COMPANY SHALL NOT, * IN ANY CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL OR * CONSEQUENTIAL DAMAGES, FOR ANY REASON WHATSOEVER. * ******************************************************************** File Description: Change History: Rev Description ----- ----------- 1.2.5 Fixed bug that prevented writes to alternate FAT tables Fixed bug that prevented FAT being updated when media is re-inserted 1.2.6 Fixed bug that resulted in a bus error when attempts to read a invalid memory region Fixed bug that prevented the Windows Explorer to show the Date Creation field for directories x.x.x Fixed issue on some USB drives where the information written to the drive is cached in a RAM for 500ms before it is written to the flash unless the sector is accessed again. Add some error recovery for FAT32 systems when there is corruption in the boot sector. 1.3.0 Modified to support Long File Name(LFN) format 1.3.4 1) Initialized some of the local variables to default values to remove non-critical compiler warnings for code sanitation. 2) The sector size of the media device is obtained from the MBR of media.So, instead of using the hard coded macro "DIRENTRIES_PER_SECTOR", the variables "dirEntriesPerSector" & "disk->sectorSize" are used in the code. Refer "Cache_File_Entry","EraseCluster" & "writeDotEntries" fucntions to see the change. ********************************************************************/ #include "Compiler.h" #include "MDD File System/FSIO.h" #include "GenericTypeDefs.h" #include "string.h" #include "stdlib.h" #include "ctype.h" #include "MDD File System/FSDefs.h" #ifdef ALLOW_FSFPRINTF #include "stdarg.h" #endif #ifdef FS_DYNAMIC_MEM #ifdef __18CXX #include "salloc.h" #endif #endif #ifndef ALLOW_WRITES #ifdef ALLOW_FORMATS #error Write functions must be enabled to use the format function #endif #ifdef ALLOW_FSFPRINTF #error Write functions must be enabled to use the FSfprintf function #endif #endif #ifdef USEREALTIMECLOCK #ifdef USERDEFINEDCLOCK #error Please select only one timestamp clocking mode in FSconfig.h #endif #ifdef INCREMENTTIMESTAMP #error Please select only one timestamp clocking mode in FSconfig.h #endif #elif defined USERDEFINEDCLOCK #ifdef INCREMENTTIMESTAMP #error Please select only one timestamp clocking mode in FSconfig.h #endif #endif /*****************************************************************************/ /* Global Variables */ /*****************************************************************************/ #ifndef FS_DYNAMIC_MEM FSFILE gFileArray[FS_MAX_FILES_OPEN]; // Array that contains file information (static allocation) BYTE gFileSlotOpen[FS_MAX_FILES_OPEN]; // Array that indicates which elements of gFileArray are available for use #ifdef SUPPORT_LFN // Array that stores long file name (static allocation) unsigned short int lfnData[FS_MAX_FILES_OPEN][257]; #endif #endif #ifdef SUPPORT_LFN #ifdef ALLOW_FILESEARCH // Array that stores long file name for File Search operation (static allocation) unsigned short int recordSearchName[257]; unsigned short int recordFoundName[257]; unsigned short int recordSearchLength; #endif unsigned short int fileFoundString[261]; #endif #if defined(USEREALTIMECLOCK) || defined(USERDEFINEDCLOCK) // Timing variables BYTE gTimeCrtMS; // Global time variable (for timestamps) used to indicate create time (milliseconds) WORD gTimeCrtTime; // Global time variable (for timestamps) used to indicate create time WORD gTimeCrtDate; // Global time variable (for timestamps) used to indicate create date WORD gTimeAccDate; // Global time variable (for timestamps) used to indicate last access date WORD gTimeWrtTime; // Global time variable (for timestamps) used to indicate last update time WORD gTimeWrtDate; // Global time variable (for timestamps) used to indicate last update date #endif DWORD gLastFATSectorRead = 0xFFFFFFFF; // Global variable indicating which FAT sector was read last BYTE gNeedFATWrite = FALSE; // Global variable indicating that there is information that needs to be written to the FAT FSFILE * gBufferOwner = NULL; // Global variable indicating which file is using the data buffer DWORD gLastDataSectorRead = 0xFFFFFFFF; // Global variable indicating which data sector was read last BYTE gNeedDataWrite = FALSE; // Global variable indicating that there is information that needs to be written to the data section BYTE nextClusterIsLast = FALSE; // Global variable indicating that the entries in a directory align with a cluster boundary BYTE gBufferZeroed = FALSE; // Global variable indicating that the data buffer contains all zeros DWORD FatRootDirClusterValue; // Global variable containing the cluster number of the root dir (0 for FAT12/16) BYTE FSerrno; // Global error variable. Set to one of many error codes after each function call. DWORD TempClusterCalc; // Global variable used to store the calculated value of the cluster of a specified sector. BYTE dirCleared; // Global variable used by the "recursive" FSrmdir function to indicate that all subdirectories and files have been deleted from the target directory. BYTE recache = FALSE; // Global variable used by the "recursive" FSrmdir function to indicate that additional cache reads are needed. FSFILE tempCWDobj; // Global variable used to preserve the current working directory information. FSFILE gFileTemp; // Global variable used for file operations. FSFILE cwd; // Global current working directory FSFILE * cwdptr = &cwd; // Pointer to the current working directory #ifdef __18CXX #pragma udata dataBuffer = DATA_BUFFER_ADDRESS BYTE gDataBuffer[MEDIA_SECTOR_SIZE]; // The global data sector buffer #pragma udata FATBuffer = FAT_BUFFER_ADDRESS BYTE gFATBuffer[MEDIA_SECTOR_SIZE]; // The global FAT sector buffer #endif #if defined (__C30__) || defined (__PIC32MX__) BYTE __attribute__ ((aligned(4))) gDataBuffer[MEDIA_SECTOR_SIZE]; // The global data sector buffer BYTE __attribute__ ((aligned(4))) gFATBuffer[MEDIA_SECTOR_SIZE]; // The global FAT sector buffer #endif #pragma udata DISK gDiskData; // Global structure containing device information. /* Global Variables to handle ASCII & UTF16 file operations */ char *asciiFilename; unsigned short int fileNameLength; #ifdef SUPPORT_LFN unsigned short int *utf16Filename; BOOL utfModeFileName = FALSE; BOOL twoByteMode = FALSE; #endif /************************************************************************/ /* Structures and defines */ /************************************************************************/ // Directory entry structure typedef struct { char DIR_Name[DIR_NAMESIZE]; // File name char DIR_Extension[DIR_EXTENSION]; // File extension BYTE DIR_Attr; // File attributes BYTE DIR_NTRes; // Reserved byte BYTE DIR_CrtTimeTenth; // Create time (millisecond field) WORD DIR_CrtTime; // Create time (second, minute, hour field) WORD DIR_CrtDate; // Create date WORD DIR_LstAccDate; // Last access date WORD DIR_FstClusHI; // High word of the entry's first cluster number WORD DIR_WrtTime; // Last update time WORD DIR_WrtDate; // Last update date WORD DIR_FstClusLO; // Low word of the entry's first cluster number DWORD DIR_FileSize; // The 32-bit file size }_DIRENTRY; typedef _DIRENTRY * DIRENTRY; // A pointer to a directory entry structure #define DIRECTORY 0x12 // Value indicating that the CreateFileEntry function will be creating a directory #define DIRENTRIES_PER_SECTOR (MEDIA_SECTOR_SIZE / 32) // The number of directory entries in a sector // Maximum number of UTF16 words in single Root directory entry #define MAX_UTF16_CHARS_IN_LFN_ENTRY (BYTE)13 // Long File Name Entry typedef struct { BYTE LFN_SequenceNo; // Sequence number, BYTE LFN_Part1[10]; // File name part 1 BYTE LFN_Attribute; // File attribute BYTE LFN_Type; // LFN Type BYTE LFN_Checksum; // Checksum unsigned short int LFN_Part2[6]; // File name part 2 unsigned short int LFN_Reserved2; // Reserved for future use unsigned short int LFN_Part3[2]; // File name part 3 }LFN_ENTRY; /* Summary: Possible type of file or directory name. ** Description: See the FormatFileName() & FormatDirName() function for more information. */ typedef enum { NAME_8P3_ASCII_CAPS_TYPE, NAME_8P3_ASCII_MIXED_TYPE, NAME_8P3_UTF16_TYPE, // SUBTYPES OF 8P3 UTF16 TYPE NAME_8P3_UTF16_ASCII_CAPS_TYPE, NAME_8P3_UTF16_ASCII_MIXED_TYPE, NAME_8P3_UTF16_NONASCII_TYPE, NAME_LFN_TYPE, NAME_ERROR } FILE_DIR_NAME_TYPE; // internal errors #define CE_FAT_EOF 60 // Error that indicates an attempt to read FAT entries beyond the end of the file #define CE_EOF 61 // Error that indicates that the end of the file has been reached typedef FSFILE * FILEOBJ; // Pointer to an FSFILE object #ifdef ALLOW_FSFPRINTF #define _FLAG_MINUS 0x1 // FSfprintf minus flag indicator #define _FLAG_PLUS 0x2 // FSfprintf plus flag indicator #define _FLAG_SPACE 0x4 // FSfprintf space flag indicator #define _FLAG_OCTO 0x8 // FSfprintf octothorpe (hash mark) flag indicator #define _FLAG_ZERO 0x10 // FSfprintf zero flag indicator #define _FLAG_SIGNED 0x80 // FSfprintf signed flag indicator #ifdef __18CXX #define _FMT_UNSPECIFIED 0 // FSfprintf unspecified argument size flag #define _FMT_LONG 1 // FSfprintf 32-bit argument size flag #define _FMT_SHRTLONG 2 // FSfprintf 24-bit argument size flag #define _FMT_BYTE 3 // FSfprintf 8-bit argument size flag #else #define _FMT_UNSPECIFIED 0 // FSfprintf unspecified argument size flag #define _FMT_LONGLONG 1 // FSfprintf 64-bit argument size flag #define _FMT_LONG 2 // FSfprintf 32-bit argument size flag #define _FMT_BYTE 3 // FSfprintf 8-bit argument size flag #endif #ifdef __18CXX static const rom char s_digits[] = "0123456789abcdef"; // FSfprintf table of conversion digits #else static const char s_digits[] = "0123456789abcdef"; // FSfprintf table of conversion digits #endif #endif /************************************************************************************/ /* Prototypes */ /************************************************************************************/ DWORD ReadFAT (DISK *dsk, DWORD ccls); DIRENTRY Cache_File_Entry( FILEOBJ fo, WORD * curEntry, BYTE ForceRead); BYTE Fill_File_Object(FILEOBJ fo, WORD *fHandle); DWORD Cluster2Sector(DISK * disk, DWORD cluster); DIRENTRY LoadDirAttrib(FILEOBJ fo, WORD *fHandle); #ifdef INCREMENTTIMESTAMP void IncrementTimeStamp(DIRENTRY dir); #elif defined USEREALTIMECLOCK void CacheTime (void); #endif #if defined (__C30__) || defined (__PIC32MX__) BYTE ReadByte( BYTE* pBuffer, WORD index ); WORD ReadWord( BYTE* pBuffer, WORD index ); DWORD ReadDWord( BYTE* pBuffer, WORD index ); #endif void FileObjectCopy(FILEOBJ foDest,FILEOBJ foSource); FILE_DIR_NAME_TYPE ValidateChars(BYTE mode); BYTE FormatFileName( const char* fileName, FILEOBJ fptr, BYTE mode); CETYPE FILEfind( FILEOBJ foDest, FILEOBJ foCompareTo, BYTE cmd, BYTE mode); BYTE FILEget_next_cluster(FILEOBJ fo, DWORD n); CETYPE FILEopen (FILEOBJ fo, WORD *fHandle, char type); #if defined(SUPPORT_LFN) BOOL Alias_LFN_Object(FILEOBJ fo); BYTE Fill_LFN_Object(FILEOBJ fo, LFN_ENTRY *lfno, WORD *fHandle); #endif // Write functions #ifdef ALLOW_WRITES BYTE Write_File_Entry( FILEOBJ fo, WORD * curEntry); BYTE flushData (void); CETYPE FILEerase( FILEOBJ fo, WORD *fHandle, BYTE EraseClusters); BYTE FILEallocate_new_cluster( FILEOBJ fo, BYTE mode); BYTE FAT_erase_cluster_chain (DWORD cluster, DISK * dsk); DWORD FATfindEmptyCluster(FILEOBJ fo); BYTE FindEmptyEntries(FILEOBJ fo, WORD *fHandle); BYTE PopulateEntries(FILEOBJ fo, WORD *fHandle, BYTE mode); CETYPE FILECreateHeadCluster( FILEOBJ fo, DWORD *cluster); BYTE EraseCluster(DISK *disk, DWORD cluster); CETYPE CreateFirstCluster(FILEOBJ fo); DWORD WriteFAT (DISK *dsk, DWORD ccls, DWORD value, BYTE forceWrite); CETYPE CreateFileEntry(FILEOBJ fo, WORD *fHandle, BYTE mode, BOOL createFirstCluster); #endif // Directory functions #ifdef ALLOW_DIRS BYTE GetPreviousEntry (FSFILE * fo); BYTE FormatDirName (char * string,FILEOBJ fptr, BYTE mode); int CreateDIR (char * path); BYTE writeDotEntries (DISK * dsk, DWORD dotAddress, DWORD dotdotAddress); int eraseDir (char * path); #ifdef ALLOW_PGMFUNCTIONS #ifdef ALLOW_WRITES int mkdirhelper (BYTE mode, char * ramptr, const rom char * romptr); int rmdirhelper (BYTE mode, char * ramptr, const rom char * romptr, unsigned char rmsubdirs); #endif int chdirhelper (BYTE mode, char * ramptr, const rom char * romptr); #else #ifdef ALLOW_WRITES int mkdirhelper (BYTE mode, char * ramptr, char * romptr); int rmdirhelper (BYTE mode, char * ramptr, char * romptr, unsigned char rmsubdirs); #endif int chdirhelper (BYTE mode, char * ramptr, char * romptr); #endif #endif #ifdef ALLOW_FSFPRINTF #ifdef __18CXX int FSvfprintf (auto FSFILE *handle, auto const rom char *formatString, auto va_list ap); #else int FSvfprintf (FSFILE *handle, const char *formatString, va_list ap); #endif int FSputc (char c, FSFILE * file); unsigned char str_put_n_chars (FSFILE * handle, unsigned char n, char c); #endif BYTE DISKmount( DISK *dsk); BYTE LoadMBR(DISK *dsk); BYTE LoadBootSector(DISK *dsk); DWORD GetFullClusterNumber(DIRENTRY entry); /************************************************************************* Function: int FSInit(void) Summary: Function to initialize the device. Conditions: The physical device should be connected to the microcontroller. Input: None Return Values: TRUE - Initialization successful FALSE - Initialization unsuccessful Side Effects: The FSerrno variable will be changed. Description: Initializes the static or dynamic memory slots for holding file structures. Initializes the device with the DISKmount function. Loads MBR and boot sector information. Initializes the current working directory to the root directory for the device if directory support is enabled. Remarks: None *************************************************************************/ int FSInit(void) { int fIndex; #ifndef FS_DYNAMIC_MEM for( fIndex = 0; fIndex < FS_MAX_FILES_OPEN; fIndex++ ) gFileSlotOpen[fIndex] = TRUE; #else #ifdef __18CXX SRAMInitHeap(); #endif #endif gBufferZeroed = FALSE; gNeedFATWrite = FALSE; gLastFATSectorRead = 0xFFFFFFFF; gLastDataSectorRead = 0xFFFFFFFF; MDD_InitIO(); if(DISKmount(&gDiskData) == CE_GOOD) { // Initialize the current working directory to the root #ifdef ALLOW_DIRS cwdptr->dsk = &gDiskData; cwdptr->sec = 0; cwdptr->pos = 0; cwdptr->seek = 0; cwdptr->size = 0; cwdptr->name[0] = '\\'; for (fIndex = 1; fIndex < 11; fIndex++) { cwdptr->name[fIndex] = 0x20; } cwdptr->entry = 0; cwdptr->attributes = ATTR_DIRECTORY; // "FatRootDirClusterValue" indicates the root cwdptr->dirclus = FatRootDirClusterValue; cwdptr->dirccls = FatRootDirClusterValue; #if defined(SUPPORT_LFN) // Initialize default values for LFN support cwdptr->AsciiEncodingType = TRUE; cwdptr->utf16LFNlength = 0x0000; #endif #endif FSerrno = 0; return TRUE; } return FALSE; } /******************************************************************************** Function: CETYPE FILEfind (FILEOBJ foDest, FILEOBJ foCompareTo, BYTE cmd, BYTE mode) Summary Finds a file on the device Conditions: This function should not be called by the user. Input: foDest - FSFILE object containing information of the file found foCompareTo - FSFILE object containing the name/attr of the file to be found cmd - - LOOK_FOR_EMPTY_ENTRY: Search for empty entry. - LOOK_FOR_MATCHING_ENTRY: Search for matching entry. mode - - 0: Match file exactly with default attributes. - 1: Match file to user-specified attributes. Return Values: CE_GOOD - File found. CE_FILE_NOT_FOUND - File not found. Side Effects: None. Description: The FILEfind function will sequentially cache directory entries within the current working directory into the foDest FSFILE object. If the cmd parameter is specified as LOOK_FOR_EMPTY_ENTRY the search will continue until an empty directory entry is found. If the cmd parameter is specified as LOOK_FOR_MATCHING_ENTRY these entries will be compared to the foCompareTo object until a match is found or there are no more entries in the current working directory. If the mode is specified a '0' the attributes of the FSFILE entries are irrelevant. If the mode is specified as '1' the attributes of the foDest entry must match the attributes specified in the foCompareTo file and partial string search characters may bypass portions of the comparison. Remarks: None ********************************************************************************/ CETYPE FILEfind( FILEOBJ foDest, FILEOBJ foCompareTo, BYTE cmd, BYTE mode) { WORD attrib, compareAttrib; WORD fHandle = foDest->entry; // current entry counter CETYPE statusB = CE_FILE_NOT_FOUND; BYTE character,test,state,index; #if defined(SUPPORT_LFN) LFN_ENTRY lfnObject; // Long File Name Object unsigned char *dst = (unsigned char *)&fileFoundString[0]; unsigned short int *templfnPtr = (unsigned short int *)foCompareTo -> utf16LFNptr; UINT16_VAL tempShift; short int fileCompareLfnIndex,fileFoundLfnIndex = 0,fileFoundMaxLfnIndex = 0,lfnCountIndex; BOOL lfnFirstCheck = FALSE,foundSFN,foundLFN,fileFoundDotPosition = FALSE,fileCompareDotPosition; BYTE lfnMaxSequenceNum = 0,reminder = 0; fileNameLength = foCompareTo->utf16LFNlength; // If 'fileNameLength' is non zero then it means that file name is of LFN format. // If 'fileNameLength' is zero then it means that file name is of 8.3 format if(fileNameLength) { // Find out the number of root entries for the given LFN reminder = fileNameLength % MAX_UTF16_CHARS_IN_LFN_ENTRY; index = fileNameLength/MAX_UTF16_CHARS_IN_LFN_ENTRY; if(reminder || (fileNameLength < MAX_UTF16_CHARS_IN_LFN_ENTRY)) { index++; } // The maximum sequence number of the LFN lfnMaxSequenceNum = (BYTE)0x40 | (BYTE)index; } #endif // reset the cluster foDest->dirccls = foDest->dirclus; // Attribute to be compared as per application layer request compareAttrib = 0xFFFF ^ foCompareTo->attributes; if (fHandle == 0) { if (Cache_File_Entry(foDest, &fHandle, TRUE) == NULL) { statusB = CE_BADCACHEREAD; } } else { // Maximum 16 entries possible if ((fHandle & MASK_MAX_FILE_ENTRY_LIMIT_BITS) != 0) { if (Cache_File_Entry (foDest, &fHandle, TRUE) == NULL) { statusB = CE_BADCACHEREAD; } } } if (statusB != CE_BADCACHEREAD) { // Loop until you reach the end or find the file while(1) { if(statusB != CE_GOOD) //First time entry always here { #if defined(SUPPORT_LFN) state = Fill_LFN_Object(foDest,&lfnObject,&fHandle); #else state = Fill_File_Object(foDest, &fHandle); #endif if(state == NO_MORE) // Reached the end of available files. Comparision over and file not found so quit. { break; } } else // statusB == CE_GOOD then exit { break; // Code below intializes"statusB = CE_GOOD;" so, if no problem in the filled file, Exit the while loop. } if(state == FOUND) // Validate the correct matching of filled file data with the required(to be found) one. { #if defined(SUPPORT_LFN) foundSFN = FALSE; foundLFN = FALSE; if(lfnObject.LFN_Attribute != ATTR_LONG_NAME) { lfnFirstCheck = FALSE; if((mode == 0x00) && fileNameLength) { fHandle++; continue; } *dst = lfnObject.LFN_SequenceNo; for(index = 0;index < 10;index++) dst[index + 1] = lfnObject.LFN_Part1[index]; foundSFN = TRUE; } else { if(lfnObject.LFN_SequenceNo & 0x40) { if((mode == 0x00) && ((fileNameLength && (lfnObject.LFN_SequenceNo != lfnMaxSequenceNum)) || !fileNameLength)) { // fHandle = fHandle + (lfnObject.LFN_SequenceNo & 0xBF) + 1; fHandle++; continue; } fileFoundLfnIndex = (lfnObject.LFN_SequenceNo & 0xBF) * MAX_UTF16_CHARS_IN_LFN_ENTRY - 1; fileCompareLfnIndex = fileFoundLfnIndex; fileFoundString[fileFoundLfnIndex--] = lfnObject.LFN_Part3[1]; fileFoundString[fileFoundLfnIndex--] = lfnObject.LFN_Part3[0]; fileFoundString[fileFoundLfnIndex--] = lfnObject.LFN_Part2[5]; fileFoundString[fileFoundLfnIndex--] = lfnObject.LFN_Part2[4]; fileFoundString[fileFoundLfnIndex--] = lfnObject.LFN_Part2[3]; fileFoundString[fileFoundLfnIndex--] = lfnObject.LFN_Part2[2]; fileFoundString[fileFoundLfnIndex--] = lfnObject.LFN_Part2[1]; fileFoundString[fileFoundLfnIndex--] = lfnObject.LFN_Part2[0]; tempShift.byte.LB = lfnObject.LFN_Part1[8]; tempShift.byte.HB = lfnObject.LFN_Part1[9]; fileFoundString[fileFoundLfnIndex--] = tempShift.Val; tempShift.byte.LB = lfnObject.LFN_Part1[6]; tempShift.byte.HB = lfnObject.LFN_Part1[7]; fileFoundString[fileFoundLfnIndex--] = tempShift.Val; tempShift.byte.LB = lfnObject.LFN_Part1[4]; tempShift.byte.HB = lfnObject.LFN_Part1[5]; fileFoundString[fileFoundLfnIndex--] = tempShift.Val; tempShift.byte.LB = lfnObject.LFN_Part1[2]; tempShift.byte.HB = lfnObject.LFN_Part1[3]; fileFoundString[fileFoundLfnIndex--] = tempShift.Val; tempShift.byte.LB = lfnObject.LFN_Part1[0]; tempShift.byte.HB = lfnObject.LFN_Part1[1]; fileFoundString[fileFoundLfnIndex--] = tempShift.Val; if(reminder) index = reminder; else index = MAX_UTF16_CHARS_IN_LFN_ENTRY; if(mode == 0x00) { if((fileFoundString[fileFoundLfnIndex + index] != 0x00) && fileNameLength) { // fHandle = fHandle + (lfnObject.LFN_SequenceNo & 0xBF) + 1; fHandle++; continue; } } else { while(fileFoundString[fileCompareLfnIndex]) fileCompareLfnIndex--; fileFoundMaxLfnIndex = fileCompareLfnIndex - 1; } lfnFirstCheck = TRUE; } else if(lfnFirstCheck == TRUE) { fileFoundString[fileFoundLfnIndex--] = lfnObject.LFN_Part3[1]; fileFoundString[fileFoundLfnIndex--] = lfnObject.LFN_Part3[0]; fileFoundString[fileFoundLfnIndex--] = lfnObject.LFN_Part2[5]; fileFoundString[fileFoundLfnIndex--] = lfnObject.LFN_Part2[4]; fileFoundString[fileFoundLfnIndex--] = lfnObject.LFN_Part2[3]; fileFoundString[fileFoundLfnIndex--] = lfnObject.LFN_Part2[2]; fileFoundString[fileFoundLfnIndex--] = lfnObject.LFN_Part2[1]; fileFoundString[fileFoundLfnIndex--] = lfnObject.LFN_Part2[0]; tempShift.byte.LB = lfnObject.LFN_Part1[8]; tempShift.byte.HB = lfnObject.LFN_Part1[9]; fileFoundString[fileFoundLfnIndex--] = tempShift.Val; tempShift.byte.LB = lfnObject.LFN_Part1[6]; tempShift.byte.HB = lfnObject.LFN_Part1[7]; fileFoundString[fileFoundLfnIndex--] = tempShift.Val; tempShift.byte.LB = lfnObject.LFN_Part1[4]; tempShift.byte.HB = lfnObject.LFN_Part1[5]; fileFoundString[fileFoundLfnIndex--] = tempShift.Val; tempShift.byte.LB = lfnObject.LFN_Part1[2]; tempShift.byte.HB = lfnObject.LFN_Part1[3]; fileFoundString[fileFoundLfnIndex--] = tempShift.Val; tempShift.byte.LB = lfnObject.LFN_Part1[0]; tempShift.byte.HB = lfnObject.LFN_Part1[1]; fileFoundString[fileFoundLfnIndex--] = tempShift.Val; } else { fHandle++; continue; } if(fileFoundLfnIndex > 0) { fHandle++; continue; } foundLFN = TRUE; } lfnFirstCheck = FALSE; statusB = CE_GOOD; switch (mode) { case 0: if(fileNameLength) { // see if we are a volume id or hidden, ignore // search for one. if status = TRUE we found one for(fileCompareLfnIndex = 0;fileCompareLfnIndex < fileNameLength;fileCompareLfnIndex++) { if(foCompareTo -> AsciiEncodingType) { // get the source character character = (BYTE)templfnPtr[fileCompareLfnIndex]; // get the destination character test = (BYTE)fileFoundString[fileCompareLfnIndex]; if((fileFoundString[fileCompareLfnIndex] > 0xFF) || (tolower(character) != tolower(test))) { statusB = CE_FILE_NOT_FOUND; // Nope its not a match break; } } else { if(templfnPtr[fileCompareLfnIndex] != fileFoundString[fileCompareLfnIndex]) { statusB = CE_FILE_NOT_FOUND; // Nope its not a match break; } } }// for loop } else { /* We got something */ character = (BYTE)'m'; // random value // search for one. if status = TRUE we found one for(index = 0; index < DIR_NAMECOMP; index++) { // get the source character character = dst[index]; // get the destination character test = foCompareTo->name[index]; if(tolower(character) != tolower(test)) { statusB = CE_FILE_NOT_FOUND; // Nope its not a match break; } }// for loop } break; case 1: if(fileNameLength) { fileFoundDotPosition = FALSE; if(foundLFN) { lfnCountIndex = fileFoundMaxLfnIndex; while(lfnCountIndex > 0) { if(fileFoundString[lfnCountIndex] == '.') { fileFoundDotPosition = TRUE; lfnCountIndex--; break; } lfnCountIndex--; } if(fileFoundDotPosition == FALSE) lfnCountIndex = fileFoundMaxLfnIndex; } else { if(dst[DIR_NAMESIZE] != ' ') fileFoundDotPosition = TRUE; lfnCountIndex = DIR_NAMESIZE - 1; } fileFoundLfnIndex = fileNameLength - 1; fileCompareDotPosition = FALSE; while(fileFoundLfnIndex > 0) { if(templfnPtr[fileFoundLfnIndex] == '.') { fileCompareDotPosition = TRUE; fileFoundLfnIndex--; break; } fileFoundLfnIndex--; } if(fileCompareDotPosition == FALSE) fileFoundLfnIndex = fileNameLength - 1; // Check for attribute match for(fileCompareLfnIndex = 0;;) { if (templfnPtr[fileCompareLfnIndex] == '*') break; if(fileCompareLfnIndex > lfnCountIndex) { // if(foundLFN) // fHandle++; statusB = CE_FILE_NOT_FOUND; // Nope its not a match break; } if (templfnPtr[fileCompareLfnIndex] != '?') { if(foCompareTo -> AsciiEncodingType) { // get the source character character = (BYTE)templfnPtr[fileCompareLfnIndex]; // get the destination character if(foundLFN) test = (BYTE)fileFoundString[fileCompareLfnIndex]; else test = dst[fileCompareLfnIndex]; if((foundLFN && (fileFoundString[fileCompareLfnIndex] > 0xFF)) || (tolower(character) != tolower(test))) { // if(foundLFN) // fHandle++; statusB = CE_FILE_NOT_FOUND; // Nope its not a match break; } } else { if((templfnPtr[fileCompareLfnIndex] != fileFoundString[fileCompareLfnIndex]) || foundSFN) { // if(foundLFN) // fHandle++; statusB = CE_FILE_NOT_FOUND; // Nope its not a match break; } } } fileCompareLfnIndex++; if(fileCompareLfnIndex > fileFoundLfnIndex) { if(fileCompareLfnIndex <= lfnCountIndex) { // if(foundLFN) // fHandle++; statusB = CE_FILE_NOT_FOUND; // Nope its not a match } break; } }// for loop if(fileCompareDotPosition == FALSE) { if(fileFoundDotPosition == TRUE) { // if(foundLFN) // fHandle++; statusB = CE_FILE_NOT_FOUND; // Nope its not a match } break; } else { if(fileFoundDotPosition == FALSE) { // if(foundLFN) // fHandle++; statusB = CE_FILE_NOT_FOUND; // Nope its not a match break; } if(foundLFN) lfnCountIndex = lfnCountIndex + 2; else lfnCountIndex = DIR_NAMESIZE; } // Check for attribute match for(fileCompareLfnIndex = fileFoundLfnIndex + 2;;) { if (templfnPtr[fileCompareLfnIndex] == '*') break; if((foundLFN && (lfnCountIndex > fileFoundMaxLfnIndex)) || (foundSFN && (lfnCountIndex == 11))) { // if(foundLFN) // fHandle++; statusB = CE_FILE_NOT_FOUND; // Nope its not a match break; } if (templfnPtr[fileCompareLfnIndex] != '?') { if(foCompareTo -> AsciiEncodingType) { // get the source character character = (BYTE)templfnPtr[fileCompareLfnIndex]; // get the destination character if(foundLFN) test = (BYTE)fileFoundString[lfnCountIndex]; else test = dst[lfnCountIndex]; if((foundLFN && (fileFoundString[lfnCountIndex] > 0xFF)) || (tolower(character) != tolower(test))) { // if(foundLFN) // fHandle++; statusB = CE_FILE_NOT_FOUND; // Nope its not a match break; } } else { if((templfnPtr[fileCompareLfnIndex] != fileFoundString[lfnCountIndex]) || foundSFN) { // if(foundLFN) // fHandle++; statusB = CE_FILE_NOT_FOUND; // Nope its not a match break; } } } lfnCountIndex++; fileCompareLfnIndex++; if(fileCompareLfnIndex == (fileNameLength - 1)) { if((foundLFN && (lfnCountIndex <= fileFoundMaxLfnIndex)) || (foundSFN && (lfnCountIndex < 11) && (dst[lfnCountIndex] != ' '))) { // if(foundLFN) // fHandle++; statusB = CE_FILE_NOT_FOUND; // Nope its not a match } break; } }// for loop } else { /* We got something */ if(foundLFN) { fileCompareLfnIndex = fileFoundMaxLfnIndex; fileFoundDotPosition = FALSE; while(fileCompareLfnIndex > 0) { if(fileFoundString[fileCompareLfnIndex] == '.') { fileFoundDotPosition = TRUE; fileCompareLfnIndex--; break; } fileCompareLfnIndex--; } if(fileFoundDotPosition == FALSE) fileCompareLfnIndex = fileFoundMaxLfnIndex; } else fileCompareLfnIndex = DIR_NAMESIZE - 1; // Short File name last char position character = (BYTE)'m'; // random value if (foCompareTo->name[0] != '*') //If "*" is passed for comparion as 1st char then don't proceed. Go back, file alreay found. { for (index = 0;;) { if(foundLFN) { if((fileFoundString[index] > 0xFF) || (index > fileCompareLfnIndex)) { // fHandle++; statusB = CE_FILE_NOT_FOUND; // it's not a match break; } } // Get the source character if(foundLFN) character = (BYTE)fileFoundString[index]; else character = dst[index]; // Get the destination character test = foCompareTo->name[index]; if (test == '*') break; if (test != '?') { if(tolower(character) != tolower(test)) { statusB = CE_FILE_NOT_FOUND; // it's not a match break; } } index++; if(index == DIR_NAMESIZE) { if(foundLFN && (index <= fileCompareLfnIndex)) { // fHandle++; statusB = CE_FILE_NOT_FOUND; // it's not a match } break; } } } // Before calling this "FILEfind" fn, "formatfilename" must be called. Hence, extn always starts from position "8". if ((foCompareTo->name[8] != '*') && (statusB == CE_GOOD)) { if(foundLFN) { if(foCompareTo->name[8] == ' ') { if(fileFoundDotPosition == TRUE) { // fHandle++; statusB = CE_FILE_NOT_FOUND; // it's not a match } break; } else { if(fileFoundDotPosition == FALSE) { // fHandle++; statusB = CE_FILE_NOT_FOUND; // it's not a match break; } } fileCompareLfnIndex = fileCompareLfnIndex + 2; } else fileCompareLfnIndex = DIR_NAMESIZE; for (index = 8;;) { if(foundLFN) { if((fileFoundString[fileCompareLfnIndex] > 0xFF) || (fileCompareLfnIndex > fileFoundMaxLfnIndex)) { // fHandle++; statusB = CE_FILE_NOT_FOUND; // it's not a match break; } } // Get the destination character test = foCompareTo->name[index]; // Get the source character if(foundLFN) character = (BYTE)fileFoundString[fileCompareLfnIndex++]; else character = dst[fileCompareLfnIndex++]; if (test == '*') break; if (test != '?') { if(tolower(character) != tolower(test)) { statusB = CE_FILE_NOT_FOUND; // it's not a match break; } } index++; if(index == DIR_NAMECOMP) { if(foundLFN && (fileCompareLfnIndex <= fileFoundMaxLfnIndex)) statusB = CE_FILE_NOT_FOUND; // it's not a match break; } } } } break; } // If the comparision of each character in LFN is completed if(statusB == CE_GOOD) { if(foundLFN) fHandle++; state = Fill_File_Object(foDest, &fHandle); /* We got something get the attributes */ attrib = foDest->attributes; attrib &= ATTR_MASK; switch (mode) { case 0: // see if we are a volume id or hidden, ignore if(attrib == ATTR_VOLUME) statusB = CE_FILE_NOT_FOUND; break; case 1: // Check for attribute match if ((attrib & compareAttrib) != 0) statusB = CE_FILE_NOT_FOUND; // Indicate the already filled file data is correct and go back if(foundLFN) foDest->utf16LFNlength = fileFoundMaxLfnIndex + 1; else foDest->utf16LFNlength = 0; break; } } #else { /* We got something */ // get the attributes attrib = foDest->attributes; attrib &= ATTR_MASK; switch (mode) { case 0: // see if we are a volume id or hidden, ignore if(attrib != ATTR_VOLUME) { statusB = CE_GOOD; character = (BYTE)'m'; // random value // search for one. if status = TRUE we found one for(index = 0; index < DIR_NAMECOMP; index++) { // get the source character character = foDest->name[index]; // get the destination character test = foCompareTo->name[index]; if(tolower(character) != tolower(test)) { statusB = CE_FILE_NOT_FOUND; // Nope its not a match break; } }// for loop } // not dir nor vol break; case 1: // Check for attribute match if (((attrib & compareAttrib) == 0) && (attrib != ATTR_LONG_NAME)) { statusB = CE_GOOD; // Indicate the already filled file data is correct and go back character = (BYTE)'m'; // random value if (foCompareTo->name[0] != '*') //If "*" is passed for comparion as 1st char then don't proceed. Go back, file alreay found. { for (index = 0; index < DIR_NAMESIZE; index++) { // Get the source character character = foDest->name[index]; // Get the destination character test = foCompareTo->name[index]; if (test == '*') break; if (test != '?') { if(tolower(character) != tolower(test)) { statusB = CE_FILE_NOT_FOUND; // it's not a match break; } } } } // Before calling this "FILEfind" fn, "formatfilename" must be called. Hence, extn always starts from position "8". if ((foCompareTo->name[8] != '*') && (statusB == CE_GOOD)) { for (index = 8; index < DIR_NAMECOMP; index++) { // Get the source character character = foDest->name[index]; // Get the destination character test = foCompareTo->name[index]; if (test == '*') break; if (test != '?') { if(tolower(character) != tolower(test)) { statusB = CE_FILE_NOT_FOUND; // it's not a match break; } } } } } // Attribute match break; } } #endif } // not found else { #if defined(SUPPORT_LFN) lfnFirstCheck = FALSE; #endif /*** looking for an empty/re-usable entry ***/ if ( cmd == LOOK_FOR_EMPTY_ENTRY) statusB = CE_GOOD; } // found or not // increment it no matter what happened fHandle++; }// while } return(statusB); } // FILEFind /************************************************************************** Function: CETYPE FILEopen (FILEOBJ fo, WORD *fHandle, char type) Summary: Loads file information from the device Conditions: This function should not be called by the user. Input: fo - File to be opened fHandle - Location of file type - - WRITE - Create a new file or replace an existing file - READ - Read data from an existing file - APPEND - Append data to an existing file Return Values: CE_GOOD - FILEopen successful CE_NOT_INIT - Device is not yet initialized CE_FILE_NOT_FOUND - Could not find the file on the device CE_BAD_SECTOR_READ - A bad read of a sector occured Side Effects: None Description: This function will cache a directory entry in the directory specified by the dirclus parameter of hte FSFILE object 'fo.' The offset of the entry in the directory is specified by fHandle. Once the directory entry has been loaded, the first sector of the file can be loaded using the cluster value specified in the directory entry. The type argument will specify the mode the files will be opened in. This will allow this function to set the correct read/write flags for the file. Remarks: If the mode the file is being opened in is a plus mode (e.g. READ+) the flags will be modified further in the FSfopen function. **************************************************************************/ CETYPE FILEopen (FILEOBJ fo, WORD *fHandle, char type) { DISK *dsk; //Disk structure BYTE r; //Result of search for file DWORD l; //lba of first sector of first cluster CETYPE error = CE_GOOD; dsk = (DISK *)(fo->dsk); if (dsk->mount == FALSE) { error = CE_NOT_INIT; } else { // load the sector fo->dirccls = fo->dirclus; // Cache no matter what if it's the first entry if (*fHandle == 0) { if (Cache_File_Entry(fo, fHandle, TRUE) == NULL) { error = CE_BADCACHEREAD; } } else { // If it's not the first, only cache it if it's // not divisible by the number of entries per sector // If it is, Fill_File_Object will cache it if ((*fHandle & 0xf) != 0) { if (Cache_File_Entry (fo, fHandle, TRUE) == NULL) { error = CE_BADCACHEREAD; } } } // Fill up the File Object with the information pointed to by fHandle r = Fill_File_Object(fo, fHandle); if (r != FOUND) error = CE_FILE_NOT_FOUND; else { fo->seek = 0; // first byte in file fo->ccls = fo->cluster; // first cluster fo->sec = 0; // first sector in the cluster fo->pos = 0; // first byte in sector/cluster if ( r == NOT_FOUND) { error = CE_FILE_NOT_FOUND; } else { // Determine the lba of the selected sector and load l = Cluster2Sector(dsk,fo->ccls); #ifdef ALLOW_WRITES if (gNeedDataWrite) if (flushData()) return CE_WRITE_ERROR; #endif gBufferOwner = fo; if (gLastDataSectorRead != l) { gBufferZeroed = FALSE; if ( !MDD_SectorRead( l, dsk->buffer)) error = CE_BAD_SECTOR_READ; gLastDataSectorRead = l; } } // -- found fo->flags.FileWriteEOF = FALSE; // Set flag for operation type #ifdef ALLOW_WRITES if ((type == 'w') || (type == 'a')) { fo->flags.write = 1; //write or append fo->flags.read = 0; } else { #endif fo->flags.write = 0; //read fo->flags.read = 1; #ifdef ALLOW_WRITES } // -- flags #endif } // -- r = Found } // -- Mounted return (error); } // -- FILEopen /************************************************************************* Function: BYTE FILEget_next_cluster(FILEOBJ fo, WORD n) Summary: Step through a chain of clusters Conditions: This function should not be called by the user. Input: fo - The file to get the next cluster of n - Number of links in the FAT cluster chain to jump through Return Values: CE_GOOD - Operation successful CE_BAD_SECTOR_READ - A bad read occured of a sector CE_INVALID_CLUSTER - Invalid cluster value \> maxcls CE_FAT_EOF - Fat attempt to read beyond EOF Side Effects: None Description: This function will load 'n' proximate clusters for a file from the FAT on the device. It will stop checking for clusters if the ReadFAT function returns an error, if it reaches the last cluster in a file, or if the device tries to read beyond the last cluster used by the device. Remarks: None *************************************************************************/ BYTE FILEget_next_cluster(FILEOBJ fo, DWORD n) { DWORD c, c2, ClusterFailValue, LastClustervalue; BYTE error = CE_GOOD; DISK * disk; disk = fo->dsk; /* Settings based on FAT type */ switch (disk->type) { #ifdef SUPPORT_FAT32 // If FAT32 supported. case FAT32: LastClustervalue = LAST_CLUSTER_FAT32; ClusterFailValue = CLUSTER_FAIL_FAT32; break; #endif case FAT12: LastClustervalue = LAST_CLUSTER_FAT12; ClusterFailValue = CLUSTER_FAIL_FAT16; break; case FAT16: default: LastClustervalue = LAST_CLUSTER_FAT16; ClusterFailValue = CLUSTER_FAIL_FAT16; break; } // loop n times do { // get the next cluster link from FAT c2 = fo->ccls; if ( (c = ReadFAT( disk, c2)) == ClusterFailValue) error = CE_BAD_SECTOR_READ; else { // check if cluster value is valid if ( c >= disk->maxcls) { error = CE_INVALID_CLUSTER; } // compare against max value of a cluster in FAT // return if eof if ( c >= LastClustervalue) // check against eof { error = CE_FAT_EOF; } } // update the FSFILE structure fo->ccls = c; } while ((--n > 0) && (error == CE_GOOD));// loop end return(error); } // get next cluster /************************************************************************** Function: BYTE DISKmount ( DISK *dsk) Summary: Initialies the device and loads MBR and boot sector information Conditions: This function should not be called by the user. Input: dsk - The disk structure to be initialized. Return Values: CE_GOOD - Disk mounted CE_INIT_ERROR - Initialization error has occured CE_UNSUPPORTED_SECTOR_SIZE - Media sector size bigger than MEDIA_SECTOR_SIZE as defined in FSconfig.h. Side Effects: None Description: This function will use the function pointed to by the MDD_MediaInitialize function pointer to initialize the device (if any initialization is required). It then attempts to load the master boot record with the LoadMBR function and the boot sector with the LoadBootSector function. These two functions will be used to initialize a global DISK structure that will be used when accessing file information in the future. Remarks: None **************************************************************************/ BYTE DISKmount( DISK *dsk) { BYTE error = CE_GOOD; MEDIA_INFORMATION *mediaInformation; dsk->mount = FALSE; // default invalid dsk->buffer = gDataBuffer; // assign buffer // Initialize the device mediaInformation = MDD_MediaInitialize(); if (mediaInformation->errorCode != MEDIA_NO_ERROR) { error = CE_INIT_ERROR; FSerrno = CE_INIT_ERROR; } else { // If the media initialization routine determined the sector size, // check it and make sure we can support it. if (mediaInformation->validityFlags.bits.sectorSize) { dsk->sectorSize = mediaInformation->sectorSize; if (mediaInformation->sectorSize > MEDIA_SECTOR_SIZE) { error = CE_UNSUPPORTED_SECTOR_SIZE; FSerrno = CE_UNSUPPORTED_SECTOR_SIZE; return error; } } // Load the Master Boot Record (partition) if((error = LoadMBR(dsk)) == CE_GOOD) { // Now the boot sector if((error = LoadBootSector(dsk)) == CE_GOOD) dsk->mount = TRUE; // Mark that the DISK mounted successfully } } // -- Load file parameters return(error); } // -- mount /******************************************************************** Function: CETYPE LoadMBR ( DISK *dsk) Summary: Loads the MBR and extracts necessary information Conditions: This function should not be called by the user. Input: dsk - The disk containing the master boot record to be loaded Return Values: CE_GOOD - MBR loaded successfully CE_BAD_SECTOR_READ - A bad read occured of a sector CE_BAD_PARTITION - The boot record is bad Side Effects: None Description: The LoadMBR function will use the function pointed to by the MDD_SectorRead function pointer to read the 0 sector from the device. If a valid boot signature is obtained, this function will compare fields in that cached sector to the values that would be present if that sector was a boot sector. If all of those values match, it will be assumed that the device does not have a master boot record and the 0 sector is actually the boot sector. Otherwise, data about the partition and the actual location of the boot sector will be loaded from the MBR into the DISK structure pointed to by 'dsk.' Remarks: None ********************************************************************/ BYTE LoadMBR(DISK *dsk) { PT_MBR Partition; BYTE error = CE_GOOD; BYTE type; BootSec BSec; // Get the partition table from the MBR if ( MDD_SectorRead( FO_MBR, dsk->buffer) != TRUE) { error = CE_BAD_SECTOR_READ; FSerrno = CE_BAD_SECTOR_READ; } else { // Check if the card has no MBR BSec = (BootSec) dsk->buffer; if((BSec->Signature0 == FAT_GOOD_SIGN_0) && (BSec->Signature1 == FAT_GOOD_SIGN_1)) { // Technically, the OEM name is not for indication // The alternative is to read the CIS from attribute // memory. See the PCMCIA metaformat for more details #if defined (__C30__) || defined (__PIC32MX__) if ((ReadByte( dsk->buffer, BSI_FSTYPE ) == 'F') && \ (ReadByte( dsk->buffer, BSI_FSTYPE + 1 ) == 'A') && \ (ReadByte( dsk->buffer, BSI_FSTYPE + 2 ) == 'T') && \ (ReadByte( dsk->buffer, BSI_FSTYPE + 3 ) == '1') && \ (ReadByte( dsk->buffer, BSI_BOOTSIG) == 0x29)) #else if ((BSec->FAT.FAT_16.BootSec_FSType[0] == 'F') && \ (BSec->FAT.FAT_16.BootSec_FSType[1] == 'A') && \ (BSec->FAT.FAT_16.BootSec_FSType[2] == 'T') && \ (BSec->FAT.FAT_16.BootSec_FSType[3] == '1') && \ (BSec->FAT.FAT_16.BootSec_BootSig == 0x29)) #endif { dsk->firsts = 0; dsk->type = FAT16; return CE_GOOD; } else { #if defined (__C30__) || defined (__PIC32MX__) if ((ReadByte( dsk->buffer, BSI_FAT32_FSTYPE ) == 'F') && \ (ReadByte( dsk->buffer, BSI_FAT32_FSTYPE + 1 ) == 'A') && \ (ReadByte( dsk->buffer, BSI_FAT32_FSTYPE + 2 ) == 'T') && \ (ReadByte( dsk->buffer, BSI_FAT32_FSTYPE + 3 ) == '3') && \ (ReadByte( dsk->buffer, BSI_FAT32_BOOTSIG) == 0x29)) #else if ((BSec->FAT.FAT_32.BootSec_FilSysType[0] == 'F') && \ (BSec->FAT.FAT_32.BootSec_FilSysType[1] == 'A') && \ (BSec->FAT.FAT_32.BootSec_FilSysType[2] == 'T') && \ (BSec->FAT.FAT_32.BootSec_FilSysType[3] == '3') && \ (BSec->FAT.FAT_32.BootSec_BootSig == 0x29)) #endif { dsk->firsts = 0; dsk->type = FAT32; return CE_GOOD; } } } // assign it the partition table strucutre Partition = (PT_MBR)dsk->buffer; // Ensure its good if((Partition->Signature0 != FAT_GOOD_SIGN_0) || (Partition->Signature1 != FAT_GOOD_SIGN_1)) { FSerrno = CE_BAD_PARTITION; error = CE_BAD_PARTITION; } else { /* Valid Master Boot Record Loaded */ // Get the 32 bit offset to the first partition dsk->firsts = Partition->Partition0.PTE_FrstSect; // check if the partition type is acceptable type = Partition->Partition0.PTE_FSDesc; switch (type) { case 0x01: dsk->type = FAT12; break; case 0x04: case 0x06: case 0x0E: dsk->type = FAT16; break; case 0x0B: case 0x0C: #ifdef SUPPORT_FAT32 // If FAT32 supported. dsk->type = FAT32; // FAT32 is supported too #else FSerrno = CE_CARDFAT32; error = CE_CARDFAT32; #endif break; default: FSerrno = CE_UNSUPPORTED_FS; error = CE_UNSUPPORTED_FS; } // switch } } return(error); }// -- LoadMBR /************************************************************************** Function: BYTE LoadBootSector (DISK *dsk) Summary: Load the boot sector and extract the necessary information Conditions: This function should not be called by the user. Input: dsk - The disk containing the boot sector Return Values: CE_GOOD - Boot sector loaded CE_BAD_SECTOR_READ - A bad read occured of a sector CE_NOT_FORMATTED - The disk is of an unsupported format CE_CARDFAT32 - FAT 32 device not supported CE_UNSUPPORTED_SECTOR_SIZE - The sector size is not supported Side Effects: None Description: LoadBootSector will use the function pointed to by the MDD_SectorWrite function pointer to load the boot sector, whose location was obtained by a previous call of LoadMBR. If the boot sector is loaded successfully, partition information will be calcualted from it and copied into the DISK structure pointed to by 'dsk.' Remarks: None **************************************************************************/ BYTE LoadBootSector(DISK *dsk) { DWORD RootDirSectors; DWORD TotSec,DataSec; BYTE error = CE_GOOD; BootSec BSec; WORD BytesPerSec; WORD ReservedSectorCount; #if defined(SUPPORT_FAT32) BOOL TriedSpecifiedBackupBootSec = FALSE; BOOL TriedBackupBootSecAtAddress6 = FALSE; #endif // Get the Boot sector if ( MDD_SectorRead( dsk->firsts, dsk->buffer) != TRUE) { error = CE_BAD_SECTOR_READ; } else { BSec = (BootSec)dsk->buffer; do //test each possible boot sector (FAT32 can have backup boot sectors) { //Verify the Boot Sector has a valid signature if( (BSec->Signature0 != FAT_GOOD_SIGN_0) || (BSec->Signature1 != FAT_GOOD_SIGN_1) ) { error = CE_NOT_FORMATTED; } else { do //loop just to allow a break to jump out of this section of code { #ifdef __18CXX // Load count of sectors per cluster dsk->SecPerClus = BSec->FAT.FAT_16.BootSec_SPC; // Load the sector number of the first FAT sector dsk->fat = dsk->firsts + BSec->FAT.FAT_16.BootSec_ResrvSec; // Load the count of FAT tables dsk->fatcopy = BSec->FAT.FAT_16.BootSec_FATCount; // Load the size of the FATs dsk->fatsize = BSec->FAT.FAT_16.BootSec_SPF; if(dsk->fatsize == 0) dsk->fatsize = BSec->FAT.FAT_32.BootSec_FATSz32; // Calculate the location of the root sector (for FAT12/16) dsk->root = dsk->fat + (DWORD)(dsk->fatcopy * (DWORD)dsk->fatsize); // Determine the max size of the root (will be 0 for FAT32) dsk->maxroot = BSec->FAT.FAT_16.BootSec_RootDirEnts; // Determine the total number of sectors in the partition if(BSec->FAT.FAT_16.BootSec_TotSec16 != 0) { TotSec = BSec->FAT.FAT_16.BootSec_TotSec16; } else { TotSec = BSec->FAT.FAT_16.BootSec_TotSec32; } // Calculate the number of bytes in each sector BytesPerSec = BSec->FAT.FAT_16.BootSec_BPS; if( (BytesPerSec == 0) || ((BytesPerSec & 1) == 1) ) { error = CE_UNSUPPORTED_SECTOR_SIZE; break; //break out of the do while loop } // Calculate the number of sectors in the root (will be 0 for FAT32) RootDirSectors = ((BSec->FAT.FAT_16.BootSec_RootDirEnts * 32) + (BSec->FAT.FAT_16.BootSec_BPS - 1)) / BSec->FAT.FAT_16.BootSec_BPS; // Calculate the number of data sectors on the card DataSec = TotSec - (dsk->root + RootDirSectors); // Calculate the maximum number of clusters on the card dsk->maxcls = DataSec / dsk->SecPerClus; #else // PIC24/30/33 // Read the count of reserved sectors ReservedSectorCount = ReadWord( dsk->buffer, BSI_RESRVSEC ); // Load the count of sectors per cluster dsk->SecPerClus = ReadByte( dsk->buffer, BSI_SPC ); // Load the sector number of the first FAT sector dsk->fat = dsk->firsts + ReservedSectorCount; // Load the count of FAT tables dsk->fatcopy = ReadByte( dsk->buffer, BSI_FATCOUNT ); // Load the size of the FATs dsk->fatsize = ReadWord( dsk->buffer, BSI_SPF ); if(dsk->fatsize == 0) dsk->fatsize = ReadDWord( dsk->buffer, BSI_FATSZ32 ); // Calculate the location of the root sector (for FAT12/16) dsk->root = dsk->fat + (DWORD)(dsk->fatcopy * (DWORD)dsk->fatsize); // Determine the max size of the root (will be 0 for FAT32) dsk->maxroot = ReadWord( dsk->buffer, BSI_ROOTDIRENTS ); // Determine the total number of sectors in the partition TotSec = ReadWord( dsk->buffer, BSI_TOTSEC16 ); if( TotSec == 0 ) TotSec = ReadDWord( dsk->buffer, BSI_TOTSEC32 ); // Calculate the number of bytes in each sector BytesPerSec = ReadWord( dsk->buffer, BSI_BPS ); if( (BytesPerSec == 0) || ((BytesPerSec & 1) == 1) ) { error = CE_UNSUPPORTED_SECTOR_SIZE; break; } // Calculate the number of sectors in the root (will be 0 for FAT32) RootDirSectors = ((dsk->maxroot * NUMBER_OF_BYTES_IN_DIR_ENTRY) + (BytesPerSec - 1)) / BytesPerSec; // Calculate the number of data sectors on the card DataSec = TotSec - (ReservedSectorCount + (dsk->fatcopy * dsk->fatsize ) + RootDirSectors); // Calculate the maximum number of clusters on the card dsk->maxcls = DataSec / dsk->SecPerClus; #endif // Determine the file system type based on the number of clusters used if(dsk->maxcls < 4085) { dsk->type = FAT12; } else { if(dsk->maxcls < 65525) { dsk->type = FAT16; } else { #ifdef SUPPORT_FAT32 dsk->type = FAT32; #else error = CE_CARDFAT32; #endif } } #ifdef SUPPORT_FAT32 if (dsk->type == FAT32) { #ifdef __18CXX FatRootDirClusterValue = BSec->FAT.FAT_32.BootSec_RootClus; #else FatRootDirClusterValue = ReadDWord( dsk->buffer, BSI_ROOTCLUS ); #endif dsk->data = dsk->root + RootDirSectors; } else #endif { FatRootDirClusterValue = 0; dsk->data = dsk->root + ( dsk->maxroot >> 4); } #ifdef __18CXX if(BSec->FAT.FAT_16.BootSec_BPS > MEDIA_SECTOR_SIZE) #else if(BytesPerSec > MEDIA_SECTOR_SIZE) #endif { error = CE_UNSUPPORTED_SECTOR_SIZE; } }while(0); // do/while loop designed to allow to break out if // there is an error detected without returning // from the function. } #if defined(SUPPORT_FAT32) if ((dsk->type == FAT32) || ((error != CE_GOOD) && ((BSec->FAT.FAT_32.BootSec_BootSig == 0x29) || (BSec->FAT.FAT_32.BootSec_BootSig == 0x28)))) { //Check for possible errors in the formatting if( (BSec->FAT.FAT_32.BootSec_TotSec16 != 0) || (BSec->FAT.FAT_32.BootSec_Reserved[0] != 0) || (BSec->FAT.FAT_32.BootSec_Reserved[1] != 0) || (BSec->FAT.FAT_32.BootSec_Reserved[2] != 0) || (BSec->FAT.FAT_32.BootSec_Reserved[3] != 0) || (BSec->FAT.FAT_32.BootSec_Reserved[4] != 0) || (BSec->FAT.FAT_32.BootSec_Reserved[5] != 0) || (BSec->FAT.FAT_32.BootSec_Reserved[6] != 0) || (BSec->FAT.FAT_32.BootSec_Reserved[7] != 0) || (BSec->FAT.FAT_32.BootSec_Reserved[8] != 0) || (BSec->FAT.FAT_32.BootSec_Reserved[9] != 0) || (BSec->FAT.FAT_32.BootSec_Reserved[10] != 0) || (BSec->FAT.FAT_32.BootSec_Reserved[11] != 0) || ((BSec->FAT.FAT_32.BootSec_BootSig != 0x29) && (BSec->FAT.FAT_32.BootSec_BootSig != 0x28)) ) { error = CE_NOT_FORMATTED; } //If there were formatting errors then in FAT32 we can try to use // the backup boot sector if((error != CE_GOOD) && (TriedSpecifiedBackupBootSec == FALSE)) { TriedSpecifiedBackupBootSec = TRUE; if ( MDD_SectorRead( dsk->firsts + BSec->FAT.FAT_32.BootSec_BkBootSec, dsk->buffer) != TRUE) { FSerrno = CE_BAD_SECTOR_READ; return CE_BAD_SECTOR_READ; } else { error = CE_GOOD; continue; } } if((error != CE_GOOD) && (TriedBackupBootSecAtAddress6 == FALSE)) { TriedBackupBootSecAtAddress6 = TRUE; //Here we are using the magic number 6 because the FAT32 specification // recommends that "No value other than 6 is recommended." We've // already tried using the value specified in the BPB_BkBootSec // field and it must have failed if ( MDD_SectorRead( dsk->firsts + 6, dsk->buffer) != TRUE) { FSerrno = CE_BAD_SECTOR_READ; return CE_BAD_SECTOR_READ; } else { error = CE_GOOD; continue; } } } //type == FAT32 #endif //SUPPORT_FAT32 break; } while(1); } if(error != CE_GOOD) { FSerrno = error; } return(error); } /************************************************************************* Function: DWORD GetFullClusterNumber (DIRENTRY entry) Summary: Gets the cluster number from a directory entry Conditions: This function should not be called by the user. Input: entry - The cached directory entry to get the cluster number from Returns: The cluster value from the passed directory entry Side Effects: None. Description: This function will load both the high and low 16-bit first cluster values of a file from a directory entry and copy them into a 32-bit cluster number variable, which will be returned. Remarks: None *************************************************************************/ DWORD GetFullClusterNumber(DIRENTRY entry) { DWORD TempFullClusterCalc = 0; #ifndef SUPPORT_FAT32 // If FAT32 Not supported. entry->DIR_FstClusHI = 0; // If FAT32 is not supported then Higher Word of the address is "0" #endif // Get the cluster TempFullClusterCalc = (entry->DIR_FstClusHI); TempFullClusterCalc = TempFullClusterCalc << 16; TempFullClusterCalc |= entry->DIR_FstClusLO; return TempFullClusterCalc; } #ifdef ALLOW_FORMATS #ifdef ALLOW_WRITES /********************************************************************************* Function: int FSCreateMBR (unsigned long firstSector, unsigned long numSectors) Summary: Creates a master boot record Conditions: The I/O pins for the device have been initialized by the InitIO function. Input: firstSector - The first sector of the partition on the device (cannot be 0; that's the MBR) numSectors - The number of sectors available in memory (including the MBR) Return Values: 0 - MBR was created successfully EOF - MBR could not be created Side Effects: None Description: This function can be used to create a master boot record for a device. Note that this function should not be used on a device that is already formatted with a master boot record (i.e. most SD cards, CF cards, USB keys). This function will fill the global data buffer with appropriate partition information for a FAT partition with a type determined by the number of sectors available to the partition. It will then write the MBR information to the first sector on the device. This function should be followed by a call to FSformat, which will create a boot sector, root dir, and FAT appropriate the the information contained in the new master boot record. Note that FSformat only supports FAT12 and FAT16 formatting at this time, and so cannot be used to format a device with more than 0x3FFD5F sectors. Remarks: This function can damage the device being used, and should not be called unless the user is sure about the size of the device and the first sector value. *********************************************************************************/ int FSCreateMBR (unsigned long firstSector, unsigned long numSectors) { PT_MBR Partition; DWORD CyHdSc = 0x00000000; DWORD tempSector; if ((firstSector == 0) || (numSectors <= 1)) return EOF; if (firstSector > (numSectors - 1)) return EOF; if (gNeedDataWrite) if (flushData()) return EOF; memset (gDataBuffer, 0x00, MEDIA_SECTOR_SIZE); Partition = (PT_MBR) gDataBuffer; // Set Cylinder-head-sector address of the first sector tempSector = firstSector; CyHdSc = (tempSector / (unsigned int)16065 ) << 14; tempSector %= 16065; CyHdSc |= (tempSector / 63) << 6; tempSector %= 63; CyHdSc |= tempSector + 1; gDataBuffer[447] = (BYTE)((CyHdSc >> 16) & 0xFF); gDataBuffer[448] = (BYTE)((CyHdSc >> 8) & 0xFF); gDataBuffer[449] = (BYTE)((CyHdSc) & 0xFF); // Set the count of sectors Partition->Partition0.PTE_NumSect = numSectors - firstSector; // Set the partition type // We only support creating FAT12 and FAT16 MBRs at this time if (Partition->Partition0.PTE_NumSect < 0x1039) { // FAT12 Partition->Partition0.PTE_FSDesc = 0x01; } else if (Partition->Partition0.PTE_NumSect <= 0x3FFD5F) { // FAT16 Partition->Partition0.PTE_FSDesc = 0x06; } else return EOF; // Set the LBA of the first sector Partition->Partition0.PTE_FrstSect = firstSector; // Set the Cylinder-head-sector address of the last sector tempSector = firstSector + numSectors - 1; CyHdSc = (tempSector / (unsigned int)16065 ) << 14; tempSector %= 16065; CyHdSc |= (tempSector / 63) << 6; tempSector %= 63; CyHdSc |= tempSector + 1; gDataBuffer[451] = (BYTE)((CyHdSc >> 16) & 0xFF); gDataBuffer[452] = (BYTE)((CyHdSc >> 8) & 0xFF); gDataBuffer[453] = (BYTE)((CyHdSc) & 0xFF); // Set the boot descriptor. This will be 0, since we won't // be booting anything from our device probably Partition->Partition0.PTE_BootDes = 0x00; // Set the signature codes Partition->Signature0 = 0x55; Partition->Signature1 = 0xAA; if (MDD_SectorWrite (0x00, gDataBuffer, TRUE) != TRUE) return EOF; else return 0; } /******************************************************************* Function: int FSformat (char mode, long int serialNumber, char * volumeID) Summary: Formats a device Conditions: The device must possess a valid master boot record. Input: mode - - 0 - Just erase the FAT and root - 1 - Create a new boot sector serialNumber - Serial number to write to the card volumeID - Name of the card Return Values: 0 - Format was successful EOF - Format was unsuccessful Side Effects: The FSerrno variable will be changed. Description: The FSformat function can be used to create a new boot sector on a device, based on the information in the master boot record. This function will first initialize the I/O pins and the device, and then attempts to read the master boot record. If the MBR cannot be loaded successfully, the function will fail. Next, if the 'mode' argument is specified as '0' the existing boot sector information will be loaded. If the 'mode' argument is '1' an entirely new boot sector will be constructed using the disk values from the master boot record. Once the boot sector has been successfully loaded/created, the locations of the FAT and root will be loaded from it, and they will be completely erased. If the user has specified a volumeID parameter, a VOLUME attribute entry will be created in the root directory to name the device. FAT12, FAT16 and FAT32 formatting are supported. Based on the number of sectors, the format function automatically compute the smallest possible value for the cluster size in order to accommodate the physical size of the media. In this case, if a media with a big capacity is formatted, the format function may take a very long time to write all the FAT tables. Therefore, the FORMAT_SECTORS_PER_CLUSTER macro may be used to specify the exact cluster size (in multiples of sector size). This macro can be defined in FSconfig.h Remarks: Only devices with a sector size of 512 bytes are supported by the format function *******************************************************************/ int FSformat (char mode, long int serialNumber, char * volumeID) { PT_MBR masterBootRecord; DWORD secCount, DataClusters, RootDirSectors; BootSec BSec; DISK d; DISK * disk = &d; WORD j; DWORD fatsize, test; DWORD Index; MEDIA_INFORMATION * mediaInfo; #ifdef __18CXX // This is here because of a C18 compiler feature BYTE * dataBufferPointer = gDataBuffer; #endif FSerrno = CE_GOOD; gBufferZeroed = FALSE; gNeedFATWrite = FALSE; gLastFATSectorRead = 0xFFFFFFFF; gLastDataSectorRead = 0xFFFFFFFF; disk->buffer = gDataBuffer; MDD_InitIO(); mediaInfo = MDD_MediaInitialize(); if (mediaInfo->errorCode != MEDIA_NO_ERROR) { FSerrno = CE_INIT_ERROR; return EOF; } if (MDD_SectorRead (0x00, gDataBuffer) == FALSE) { FSerrno = CE_BADCACHEREAD; return EOF; } // Check if the card has no MBR BSec = (BootSec) disk->buffer; if((BSec->Signature0 == FAT_GOOD_SIGN_0) && (BSec->Signature1 == FAT_GOOD_SIGN_1)) { // Technically, the OEM name is not for indication // The alternative is to read the CIS from attribute // memory. See the PCMCIA metaformat for more details #if defined (__C30__) || defined (__PIC32MX__) if ((ReadByte( disk->buffer, BSI_FSTYPE ) == 'F') && \ (ReadByte( disk->buffer, BSI_FSTYPE + 1 ) == 'A') && \ (ReadByte( disk->buffer, BSI_FSTYPE + 2 ) == 'T') && \ (ReadByte( disk->buffer, BSI_FSTYPE + 3 ) == '1') && \ (ReadByte( disk->buffer, BSI_BOOTSIG) == 0x29)) #else if ((BSec->FAT.FAT_16.BootSec_FSType[0] == 'F') && \ (BSec->FAT.FAT_16.BootSec_FSType[1] == 'A') && \ (BSec->FAT.FAT_16.BootSec_FSType[2] == 'T') && \ (BSec->FAT.FAT_16.BootSec_FSType[3] == '1') && \ (BSec->FAT.FAT_16.BootSec_BootSig == 0x29)) #endif { /* Mark that we do not have a MBR; this is not actualy used - is here only to remove a compilation warning */ masterBootRecord = (PT_MBR) NULL; switch (mode) { case 1: // not enough info to construct our own boot sector FSerrno = CE_INVALID_ARGUMENT; return EOF; case 0: // We have to determine the operating system, and the // locations and sizes of the root dir and FAT, and the // count of FATs disk->firsts = 0; if (LoadBootSector (disk) != CE_GOOD) { FSerrno = CE_BADCACHEREAD; return EOF; } default: break; } } else { masterBootRecord = (PT_MBR) &gDataBuffer; disk->firsts = masterBootRecord->Partition0.PTE_FrstSect; } } else { /* If the signature is not correct, this is neither a MBR, nor a VBR */ FSerrno = CE_BAD_PARTITION; return EOF; } switch (mode) { // True: Rewrite the whole boot sector case 1: secCount = masterBootRecord->Partition0.PTE_NumSect; if (secCount < 0x1039) { disk->type = FAT12; // Format to FAT12 only if there are too few sectors to format // as FAT16 masterBootRecord->Partition0.PTE_FSDesc = 0x01; if (MDD_SectorWrite (0x00, gDataBuffer, TRUE) == FALSE) { FSerrno = CE_WRITE_ERROR; return EOF; } if (secCount >= 0x1028) { // More than 0x18 sectors for FATs, 0x20 for root dir, // 0x8 reserved, and 0xFED for data // So double the number of sectors in a cluster to reduce // the number of data clusters used disk->SecPerClus = 2; } else { // One sector per cluster disk->SecPerClus = 1; } // Prepare a boot sector memset (gDataBuffer, 0x00, MEDIA_SECTOR_SIZE); // Last digit of file system name (FAT12 ) gDataBuffer[58] = '2'; // Calculate the size of the FAT fatsize = (secCount - 0x21 + (2*disk->SecPerClus)); test = (341 * disk->SecPerClus) + 2; fatsize = (fatsize + (test-1)) / test; disk->fatcopy = 0x02; disk->maxroot = 0x200; disk->fatsize = fatsize; } else if (secCount <= 0x3FFD5F) { disk->type = FAT16; // Format to FAT16 masterBootRecord->Partition0.PTE_FSDesc = 0x06; if (MDD_SectorWrite (0x00, gDataBuffer, TRUE) == FALSE) { FSerrno = CE_WRITE_ERROR; return EOF; } DataClusters = secCount - 0x218; // Figure out how many sectors per cluster we need disk->SecPerClus = 1; while (DataClusters > 0xFFED) { disk->SecPerClus *= 2; DataClusters /= 2; } // This shouldnt happen if (disk->SecPerClus > 128) { FSerrno = CE_BAD_PARTITION; return EOF; } // Prepare a boot sector memset (gDataBuffer, 0x00, MEDIA_SECTOR_SIZE); // Last digit of file system name (FAT16 ) gDataBuffer[58] = '6'; // Calculate the size of the FAT fatsize = (secCount - 0x21 + (2*disk->SecPerClus)); test = (256 * disk->SecPerClus) + 2; fatsize = (fatsize + (test-1)) / test; disk->fatcopy = 0x02; disk->maxroot = 0x200; disk->fatsize = fatsize; } else { disk->type = FAT32; // Format to FAT32 masterBootRecord->Partition0.PTE_FSDesc = 0x0B; if (MDD_SectorWrite (0x00, gDataBuffer, TRUE) == FALSE) { FSerrno = CE_WRITE_ERROR; return EOF; } #ifdef FORMAT_SECTORS_PER_CLUSTER disk->SecPerClus = FORMAT_SECTORS_PER_CLUSTER; DataClusters = secCount / disk->SecPerClus; /* FAT32: 65526 < Number of clusters < 4177918 */ if ((DataClusters <= 65526) || (DataClusters >= 4177918)) { FSerrno = CE_BAD_PARTITION; return EOF; } #else /* FAT32: 65526 < Number of clusters < 4177918 */ DataClusters = secCount; // Figure out how many sectors per cluster we need disk->SecPerClus = 1; while (DataClusters > 0x3FBFFE) { disk->SecPerClus *= 2; DataClusters /= 2; } #endif // Check the cluster size: FAT32 supports 512, 1024, 2048, 4096, 8192, 16K, 32K, 64K if (disk->SecPerClus > 128) { FSerrno = CE_BAD_PARTITION; return EOF; } // Prepare a boot sector memset (gDataBuffer, 0x00, MEDIA_SECTOR_SIZE); // Calculate the size of the FAT fatsize = (secCount - 0x20); test = (128 * disk->SecPerClus) + 1; fatsize = (fatsize + (test-1)) / test; disk->fatcopy = 0x02; disk->maxroot = 0x200; disk->fatsize = fatsize; } // Non-file system specific values gDataBuffer[0] = 0xEB; //Jump instruction gDataBuffer[1] = 0x3C; gDataBuffer[2] = 0x90; gDataBuffer[3] = 'M'; //OEM Name "MCHP FAT" gDataBuffer[4] = 'C'; gDataBuffer[5] = 'H'; gDataBuffer[6] = 'P'; gDataBuffer[7] = ' '; gDataBuffer[8] = 'F'; gDataBuffer[9] = 'A'; gDataBuffer[10] = 'T'; gDataBuffer[11] = 0x00; //Sector size gDataBuffer[12] = 0x02; gDataBuffer[13] = disk->SecPerClus; //Sectors per cluster if ((disk->type == FAT12) || (disk->type == FAT16)) { gDataBuffer[14] = 0x08; //Reserved sector count gDataBuffer[15] = 0x00; disk->fat = 0x08 + disk->firsts; gDataBuffer[16] = 0x02; //number of FATs gDataBuffer[17] = 0x00; //Max number of root directory entries - 512 files allowed gDataBuffer[18] = 0x02; gDataBuffer[19] = 0x00; //total sectors gDataBuffer[20] = 0x00; gDataBuffer[21] = 0xF8; //Media Descriptor gDataBuffer[22] = fatsize & 0xFF; //Sectors per FAT gDataBuffer[23] = (fatsize >> 8) & 0xFF; gDataBuffer[24] = 0x3F; //Sectors per track gDataBuffer[25] = 0x00; gDataBuffer[26] = 0xFF; //Number of heads gDataBuffer[27] = 0x00; // Hidden sectors = sectors between the MBR and the boot sector gDataBuffer[28] = (BYTE)(disk->firsts & 0xFF); gDataBuffer[29] = (BYTE)((disk->firsts / 0x100) & 0xFF); gDataBuffer[30] = (BYTE)((disk->firsts / 0x10000) & 0xFF); gDataBuffer[31] = (BYTE)((disk->firsts / 0x1000000) & 0xFF); // Total Sectors = same as sectors in the partition from MBR gDataBuffer[32] = (BYTE)(secCount & 0xFF); gDataBuffer[33] = (BYTE)((secCount / 0x100) & 0xFF); gDataBuffer[34] = (BYTE)((secCount / 0x10000) & 0xFF); gDataBuffer[35] = (BYTE)((secCount / 0x1000000) & 0xFF); gDataBuffer[36] = 0x00; // Physical drive number gDataBuffer[37] = 0x00; // Reserved (current head) gDataBuffer[38] = 0x29; // Signature code gDataBuffer[39] = (BYTE)(serialNumber & 0xFF); gDataBuffer[40] = (BYTE)((serialNumber / 0x100) & 0xFF); gDataBuffer[41] = (BYTE)((serialNumber / 0x10000) & 0xFF); gDataBuffer[42] = (BYTE)((serialNumber / 0x1000000) & 0xFF); // Volume ID if (volumeID != NULL) { for (Index = 0; (*(volumeID + Index) != 0) && (Index < 11); Index++) { gDataBuffer[Index + 43] = *(volumeID + Index); } while (Index < 11) { gDataBuffer[43 + Index++] = 0x20; } } else { for (Index = 0; Index < 11; Index++) { gDataBuffer[Index+43] = 0; } } gDataBuffer[54] = 'F'; gDataBuffer[55] = 'A'; gDataBuffer[56] = 'T'; gDataBuffer[57] = '1'; gDataBuffer[59] = ' '; gDataBuffer[60] = ' '; gDataBuffer[61] = ' '; } else //FAT32 { gDataBuffer[14] = 0x20; //Reserved sector count gDataBuffer[15] = 0x00; disk->fat = 0x20 + disk->firsts; gDataBuffer[16] = 0x02; //number of FATs gDataBuffer[17] = 0x00; //Max number of root directory entries - 512 files allowed gDataBuffer[18] = 0x00; gDataBuffer[19] = 0x00; //total sectors gDataBuffer[20] = 0x00; gDataBuffer[21] = 0xF8; //Media Descriptor gDataBuffer[22] = 0x00; //Sectors per FAT gDataBuffer[23] = 0x00; gDataBuffer[24] = 0x3F; //Sectors per track gDataBuffer[25] = 0x00; gDataBuffer[26] = 0xFF; //Number of heads gDataBuffer[27] = 0x00; // Hidden sectors = sectors between the MBR and the boot sector gDataBuffer[28] = (BYTE)(disk->firsts & 0xFF); gDataBuffer[29] = (BYTE)((disk->firsts / 0x100) & 0xFF); gDataBuffer[30] = (BYTE)((disk->firsts / 0x10000) & 0xFF); gDataBuffer[31] = (BYTE)((disk->firsts / 0x1000000) & 0xFF); // Total Sectors = same as sectors in the partition from MBR gDataBuffer[32] = (BYTE)(secCount & 0xFF); gDataBuffer[33] = (BYTE)((secCount / 0x100) & 0xFF); gDataBuffer[34] = (BYTE)((secCount / 0x10000) & 0xFF); gDataBuffer[35] = (BYTE)((secCount / 0x1000000) & 0xFF); gDataBuffer[36] = fatsize & 0xFF; //Sectors per FAT gDataBuffer[37] = (fatsize >> 8) & 0xFF; gDataBuffer[38] = (fatsize >> 16) & 0xFF; gDataBuffer[39] = (fatsize >> 24) & 0xFF; gDataBuffer[40] = 0x00; //Active FAT gDataBuffer[41] = 0x00; gDataBuffer[42] = 0x00; //File System version gDataBuffer[43] = 0x00; gDataBuffer[44] = 0x02; //First cluster of the root directory gDataBuffer[45] = 0x00; gDataBuffer[46] = 0x00; gDataBuffer[47] = 0x00; gDataBuffer[48] = 0x01; //FSInfo gDataBuffer[49] = 0x00; gDataBuffer[50] = 0x00; //Backup Boot Sector gDataBuffer[51] = 0x00; gDataBuffer[52] = 0x00; //Reserved for future expansion gDataBuffer[53] = 0x00; gDataBuffer[54] = 0x00; gDataBuffer[55] = 0x00; gDataBuffer[56] = 0x00; gDataBuffer[57] = 0x00; gDataBuffer[58] = 0x00; gDataBuffer[59] = 0x00; gDataBuffer[60] = 0x00; gDataBuffer[61] = 0x00; gDataBuffer[62] = 0x00; gDataBuffer[63] = 0x00; gDataBuffer[64] = 0x00; // Physical drive number gDataBuffer[65] = 0x00; // Reserved (current head) gDataBuffer[66] = 0x29; // Signature code gDataBuffer[67] = (BYTE)(serialNumber & 0xFF); gDataBuffer[68] = (BYTE)((serialNumber / 0x100) & 0xFF); gDataBuffer[69] = (BYTE)((serialNumber / 0x10000) & 0xFF); gDataBuffer[70] = (BYTE)((serialNumber / 0x1000000) & 0xFF); // Volume ID if (volumeID != NULL) { for (Index = 0; (*(volumeID + Index) != 0) && (Index < 11); Index++) { gDataBuffer[Index + 71] = *(volumeID + Index); } while (Index < 11) { gDataBuffer[71 + Index++] = 0x20; } } else { for (Index = 0; Index < 11; Index++) { gDataBuffer[Index+71] = 0; } } gDataBuffer[82] = 'F'; gDataBuffer[83] = 'A'; gDataBuffer[84] = 'T'; gDataBuffer[85] = '3'; gDataBuffer[86] = '2'; gDataBuffer[87] = ' '; gDataBuffer[88] = ' '; gDataBuffer[89] = ' '; } #ifdef __18CXX // C18 can't reference a value greater than 256 // using an array name pointer *(dataBufferPointer + 510) = 0x55; *(dataBufferPointer + 511) = 0xAA; #else gDataBuffer[510] = 0x55; gDataBuffer[511] = 0xAA; #endif disk->root = disk->fat + (disk->fatcopy * disk->fatsize); if (MDD_SectorWrite (disk->firsts, gDataBuffer, FALSE) == FALSE) { FSerrno = CE_WRITE_ERROR; return EOF; } break; case 0: if (LoadBootSector (disk) != CE_GOOD) { FSerrno = CE_BADCACHEREAD; return EOF; } break; default: FSerrno = CE_INVALID_ARGUMENT; return EOF; } // Erase the FAT memset (gDataBuffer, 0x00, MEDIA_SECTOR_SIZE); if (disk->type == FAT32) { gDataBuffer[0] = 0xF8; //BPB_Media byte value in its low 8 bits, and all other bits are set to 1 gDataBuffer[1] = 0xFF; gDataBuffer[2] = 0xFF; gDataBuffer[3] = 0xFF; gDataBuffer[4] = 0x00; //Disk is clean and no read/write errors were encountered gDataBuffer[5] = 0x00; gDataBuffer[6] = 0x00; gDataBuffer[7] = 0x0C; gDataBuffer[8] = 0xFF; //Root Directory EOF gDataBuffer[9] = 0xFF; gDataBuffer[10] = 0xFF; gDataBuffer[11] = 0xFF; for (j = disk->fatcopy - 1; j != 0xFFFF; j--) { if (MDD_SectorWrite (disk->fat + (j * disk->fatsize), gDataBuffer, FALSE) == FALSE) return EOF; } memset (gDataBuffer, 0x00, 12); for (Index = disk->fat + 1; Index < (disk->fat + disk->fatsize); Index++) { for (j = disk->fatcopy - 1; j != 0xFFFF; j--) { if (MDD_SectorWrite (Index + (j * disk->fatsize), gDataBuffer, FALSE) == FALSE) return EOF; } } // Erase the root directory for (Index = 1; Index < disk->SecPerClus; Index++) { if (MDD_SectorWrite (disk->root + Index, gDataBuffer, FALSE) == FALSE) return EOF; } if (volumeID != NULL) { // Create a drive name entry in the root dir Index = 0; while ((*(volumeID + Index) != 0) && (Index < 11)) { gDataBuffer[Index] = *(volumeID + Index); Index++; } while (Index < 11) { gDataBuffer[Index++] = ' '; } gDataBuffer[11] = 0x08; gDataBuffer[17] = 0x11; gDataBuffer[19] = 0x11; gDataBuffer[23] = 0x11; if (MDD_SectorWrite (disk->root, gDataBuffer, FALSE) == FALSE) return EOF; } else { if (MDD_SectorWrite (disk->root, gDataBuffer, FALSE) == FALSE) return EOF; } return 0; } else { gDataBuffer[0] = 0xF8; gDataBuffer[1] = 0xFF; gDataBuffer[2] = 0xFF; if (disk->type == FAT16) gDataBuffer[3] = 0xFF; for (j = disk->fatcopy - 1; j != 0xFFFF; j--) { if (MDD_SectorWrite (disk->fat + (j * disk->fatsize), gDataBuffer, FALSE) == FALSE) return EOF; } memset (gDataBuffer, 0x00, 4); for (Index = disk->fat + 1; Index < (disk->fat + disk->fatsize); Index++) { for (j = disk->fatcopy - 1; j != 0xFFFF; j--) { if (MDD_SectorWrite (Index + (j * disk->fatsize), gDataBuffer, FALSE) == FALSE) return EOF; } } // Erase the root directory RootDirSectors = ((disk->maxroot * 32) + (disk->sectorSize - 1)) / disk->sectorSize; for (Index = 1; Index < RootDirSectors; Index++) { if (MDD_SectorWrite (disk->root + Index, gDataBuffer, FALSE) == FALSE) return EOF; } if (volumeID != NULL) { // Create a drive name entry in the root dir Index = 0; while ((*(volumeID + Index) != 0) && (Index < 11)) { gDataBuffer[Index] = *(volumeID + Index); Index++; } while (Index < 11) { gDataBuffer[Index++] = ' '; } gDataBuffer[11] = 0x08; gDataBuffer[17] = 0x11; gDataBuffer[19] = 0x11; gDataBuffer[23] = 0x11; if (MDD_SectorWrite (disk->root, gDataBuffer, FALSE) == FALSE) return EOF; } else { if (MDD_SectorWrite (disk->root, gDataBuffer, FALSE) == FALSE) return EOF; } return 0; } } #endif #endif /******************************************************* Function: BYTE Write_File_Entry( FILEOBJ fo, WORD * curEntry) Summary: Write dir entry info into a specified entry Conditions: This function should not be called by the user. Input: fo - \File structure curEntry - Write destination Return Values: TRUE - Operation successful FALSE - Operation failed Side Effects: None Description: This function will calculate the sector of the directory (whose base sector is pointed to by the dirccls value in the FSFILE object 'fo') that contains a directory entry whose offset is indicated by the curEntry parameter. It will then write the data in the global data buffer (which should already contain the entries for that sector) to the device. Remarks: None *******************************************************/ #ifdef ALLOW_WRITES BYTE Write_File_Entry( FILEOBJ fo, WORD * curEntry) { DISK *dsk; BYTE status; BYTE offset2; DWORD sector; DWORD ccls; dsk = fo->dsk; // get the cluster of this entry ccls = fo->dirccls; // figure out the offset from the base sector offset2 = (*curEntry / (dsk->sectorSize/32)); /* Settings based on FAT type */ switch (dsk->type) { #ifdef SUPPORT_FAT32 // If FAT32 supported. case FAT32: // Root is always cluster-based in FAT32 offset2 = offset2 % (dsk->SecPerClus); break; #endif case FAT12: case FAT16: if(ccls != FatRootDirClusterValue) offset2 = offset2 % (dsk->SecPerClus); break; } sector = Cluster2Sector(dsk,ccls); // Now write it // "Offset" ensures writing of data belonging to a file entry only. Hence it doesn't change other file entries. if ( !MDD_SectorWrite( sector + offset2, dsk->buffer, FALSE)) status = FALSE; else status = TRUE; return(status); } // Write_File_Entry #endif /********************************************************** Function: BYTE FAT_erase_cluster_chain (WORD cluster, DISK * dsk) Summary: Erase a chain of clusters Conditions: This function should not be called by the user. Input: cluster - The cluster number dsk - The disk structure Return Values: TRUE - Operation successful FALSE - Operation failed Side Effects: None Description: This function will parse through a cluster chain starting with the cluster pointed to by 'cluster' and mark all of the FAT entries as empty until the end of the chain has been reached or an error occurs. Remarks: None **********************************************************/ #ifdef ALLOW_WRITES BYTE FAT_erase_cluster_chain (DWORD cluster, DISK * dsk) { DWORD c,c2,ClusterFailValue; enum _status {Good, Fail, Exit}status; status = Good; /* Settings based on FAT type */ switch (dsk->type) { #ifdef SUPPORT_FAT32 // If FAT32 supported. case FAT32: ClusterFailValue = CLUSTER_FAIL_FAT32; c2 = LAST_CLUSTER_FAT32; break; #endif case FAT12: ClusterFailValue = CLUSTER_FAIL_FAT16; // FAT16 value itself c2 = LAST_CLUSTER_FAT12; break; case FAT16: default: ClusterFailValue = CLUSTER_FAIL_FAT16; c2 = LAST_CLUSTER_FAT16; break; } // Make sure there is actually a cluster assigned if((cluster == 0) || (cluster == 1)) // Cluster assigned can't be "0" and "1" { status = Exit; } else { while(status == Good) { // Get the FAT entry if((c = ReadFAT( dsk, cluster)) == ClusterFailValue) status = Fail; else { if((c == 0) || (c == 1)) // Cluster assigned can't be "0" and "1" { status = Exit; } else { // compare against max value of a cluster in FATxx // look for the last cluster in the chain if ( c >= c2) status = Exit; // Now erase this FAT entry if(WriteFAT(dsk, cluster, CLUSTER_EMPTY, FALSE) == ClusterFailValue) status = Fail; // now update what the current cluster is cluster = c; } } }// while status }// cluster == 0 WriteFAT (dsk, 0, 0, TRUE); if(status == Exit) return(TRUE); else return(FALSE); } // Erase cluster #endif /************************************************************************** Function: DIRENTRY Cache_File_Entry( FILEOBJ fo, WORD * curEntry, BYTE ForceRead) Summary: Load a file entry Conditions: This function should not be called by the user. Input: fo - File information curEntry - Offset of the directory entry to load. ForceRead - Forces loading of a new sector of the directory. Return: DIRENTRY - Pointer to the directory entry that was loaded. Side Effects: Any unwritten data in the data buffer will be written to the device. Description: Load the sector containing the file entry pointed to by 'curEntry' from the directory pointed to by the variables in 'fo.' Remarks: Any modification of this function is extremely likely to break something. **************************************************************************/ DIRENTRY Cache_File_Entry( FILEOBJ fo, WORD * curEntry, BYTE ForceRead) { DIRENTRY dir; DISK *dsk; DWORD sector; DWORD cluster, LastClusterLimit; DWORD ccls; BYTE offset2; BYTE numofclus; BYTE dirEntriesPerSector; dsk = fo->dsk; // get the base sector of this directory cluster = fo->dirclus; ccls = fo->dirccls; dirEntriesPerSector = dsk->sectorSize/32; // figure out the offset from the base sector offset2 = (*curEntry / dirEntriesPerSector); offset2 = offset2; // emulator issue /* Settings based on FAT type */ switch (dsk->type) { #ifdef SUPPORT_FAT32 // If FAT32 supported. case FAT32: // the ROOT is always cluster based in FAT32 /* In FAT32: There is no ROOT region. Root etries are made in DATA region only. Every cluster of DATA which is accupied by ROOT is tracked by FAT table/entry so the ROOT can grow to an amount which is restricted only by available free DATA region. */ offset2 = offset2 % (dsk->SecPerClus); // figure out the offset LastClusterLimit = LAST_CLUSTER_FAT32; break; #endif case FAT12: case FAT16: default: // if its the root its not cluster based if(cluster != 0) offset2 = offset2 % (dsk->SecPerClus); // figure out the offset LastClusterLimit = LAST_CLUSTER_FAT16; break; } // check if a new sector of the root must be loaded if (ForceRead || ((*curEntry & MASK_MAX_FILE_ENTRY_LIMIT_BITS) == 0)) // only 16 entries per sector { // see if we have to load a new cluster if(((offset2 == 0) && (*curEntry >= dirEntriesPerSector)) || ForceRead) { if(cluster == 0) { ccls = 0; } else { // If ForceRead, read the number of sectors from 0 if(ForceRead) numofclus = ((WORD)(*curEntry) / (WORD)(((WORD)dirEntriesPerSector) * (WORD)dsk->SecPerClus)); // Otherwise just read the next sector else numofclus = 1; // move to the correct cluster while(numofclus) { ccls = ReadFAT(dsk, ccls); if(ccls >= LastClusterLimit) break; else numofclus--; } } } // see if that we have a valid cluster number if(ccls < LastClusterLimit) { fo->dirccls = ccls; // write it back sector = Cluster2Sector(dsk,ccls); /* see if we are root and about to go pass our boundaries FAT32 stores the root directory in the Data Region along with files and other directories, allowing it to grow without such a restraint */ if((ccls == FatRootDirClusterValue) && ((sector + offset2) >= dsk->data) && (FAT32 != dsk->type)) { dir = ((DIRENTRY)NULL); // reached the end of the root } else { #ifdef ALLOW_WRITES if (gNeedDataWrite) if (flushData()) return NULL; #endif gBufferOwner = NULL; gBufferZeroed = FALSE; if ( MDD_SectorRead( sector + offset2, dsk->buffer) != TRUE) // if FALSE: sector could not be read. { dir = ((DIRENTRY)NULL); } else // Sector has been read properly, Copy the root entry info of the file searched. { if(ForceRead) // Buffer holds all 16 root entry info. Point to the one required. dir = (DIRENTRY)((DIRENTRY)dsk->buffer) + ((*curEntry)%dirEntriesPerSector); else dir = (DIRENTRY)dsk->buffer; } gLastDataSectorRead = 0xFFFFFFFF; } } else { nextClusterIsLast = TRUE; dir = ((DIRENTRY)NULL); } } else dir = (DIRENTRY)((DIRENTRY)dsk->buffer) + ((*curEntry)%dirEntriesPerSector); return(dir); } // Cache_File_Entry /************************************************************************* Function: CETYPE CreateFileEntry(FILEOBJ fo, WORD *fHandle, BYTE mode, BOOL createFirstCluster) Summary: Create a new file entry Conditions: Should not be called by the user. Input: fo - Pointer to file structure fHandle - Location to create file mode - DIRECTORY mode or ARCHIVE mode createFirstCluster - If set to TRUE, first cluster is created Return Values: CE_GOOD - File Creation successful CE_DIR_FULL - All root directory entries are taken CE_WRITE_ERROR - The head cluster of the file could not be created. Side Effects: Modifies the FSerrno variable. Description: With the data passed within fo, create a new file entry in the current directory. This function will first search for empty file entries. Once an empty entry is found, the entry will be populated with data for a file or directory entry. Finally, the first cluster of the new file will be located and allocated, and its value will be written into the file entry. Remarks: None *************************************************************************/ #ifdef ALLOW_WRITES CETYPE CreateFileEntry(FILEOBJ fo, WORD *fHandle, BYTE mode, BOOL createFirstCluster) { CETYPE error = CE_GOOD; #if defined(SUPPORT_LFN) LFN_ENTRY *lfno; unsigned short int *templfnPtr = (unsigned short int *)fo -> utf16LFNptr,*dest; unsigned short int tempString[MAX_UTF16_CHARS_IN_LFN_ENTRY]; UINT16_VAL tempShift; BOOL firstTime = TRUE; BYTE checksum,sequenceNumber,reminder,tempCalc1,numberOfFileEntries; char index; char *src; #endif FSerrno = CE_GOOD; *fHandle = 0; // figure out where to put this file in the directory stucture if(FindEmptyEntries(fo, fHandle)) { #if defined(SUPPORT_LFN) // If LFN entry if(fo->utf16LFNlength) { // Alias the LFN to short file name if(!Alias_LFN_Object(fo)) { // If Aliasing of LFN is unsucessful error = FSerrno = CE_FILENAME_EXISTS; return(error); } src = fo -> name; // Find the checksum for Short file name of LFN checksum = 0; for (index = 11; index != 0; index--) { checksum = ((checksum & 1) ? 0x80 : 0) + (checksum >> 1) + *src++; } // File Name + NULL character is file name length in LFN fileNameLength = fo->utf16LFNlength; // Determine the number of entries for LFN reminder = tempCalc1 = fileNameLength % MAX_UTF16_CHARS_IN_LFN_ENTRY; numberOfFileEntries = fileNameLength/MAX_UTF16_CHARS_IN_LFN_ENTRY; if(tempCalc1 || (fileNameLength < MAX_UTF16_CHARS_IN_LFN_ENTRY)) { numberOfFileEntries++; } // Max sequence number for LFN root entry sequenceNumber = numberOfFileEntries | 0x40; // Store the max sequence number entries in tempString if(tempCalc1) { index = 0; while(tempCalc1) { tempString[(BYTE)index++] = templfnPtr[fileNameLength - tempCalc1]; tempCalc1--; } // Store the remaining bytes of max sequence number entries with 0xFF for(;index < MAX_UTF16_CHARS_IN_LFN_ENTRY;index++) { tempString[(BYTE)index] = 0xFFFF; } } else { // Store the remaining bytes of max sequence number entries with 0xFF for(index = MAX_UTF16_CHARS_IN_LFN_ENTRY;index > 0;index--) { tempString[MAX_UTF16_CHARS_IN_LFN_ENTRY - (BYTE)index] = templfnPtr[fileNameLength - (BYTE)index]; } } dest = &tempString[12]; while(numberOfFileEntries) { fo->dirccls = fo->dirclus; lfno = (LFN_ENTRY *)Cache_File_Entry( fo, fHandle, TRUE); if (lfno == NULL) { return CE_BADCACHEREAD; } // Write the 32 byte LFN Object as per FAT specification lfno->LFN_SequenceNo = sequenceNumber--; // Sequence number, lfno->LFN_Part3[1] = *dest--; lfno->LFN_Part3[0] = *dest--; lfno->LFN_Part2[5] = *dest--; lfno->LFN_Part2[4] = *dest--; lfno->LFN_Part2[3] = *dest--; lfno->LFN_Part2[2] = *dest--; lfno->LFN_Part2[1] = *dest--; lfno->LFN_Part2[0] = *dest--; tempShift.Val = *dest--; lfno->LFN_Part1[9] = tempShift.byte.HB; lfno->LFN_Part1[8] = tempShift.byte.LB; tempShift.Val = *dest--; lfno->LFN_Part1[7] = tempShift.byte.HB; lfno->LFN_Part1[6] = tempShift.byte.LB; tempShift.Val = *dest--; lfno->LFN_Part1[5] = tempShift.byte.HB; lfno->LFN_Part1[4] = tempShift.byte.LB; tempShift.Val = *dest--; lfno->LFN_Part1[3] = tempShift.byte.HB; lfno->LFN_Part1[2] = tempShift.byte.LB; tempShift.Val = *dest--; lfno->LFN_Part1[1] = tempShift.byte.HB; lfno->LFN_Part1[0] = tempShift.byte.LB; lfno->LFN_Attribute = ATTR_LONG_NAME; lfno->LFN_Type = 0; lfno->LFN_Checksum = checksum; lfno->LFN_Reserved2 = 0; // just write the last entry in if (Write_File_Entry(fo,fHandle) != TRUE) error = CE_WRITE_ERROR; // 0x40 should be ORed with only max sequence number & in // all other cases it should not be present sequenceNumber &= (~0x40); *fHandle = *fHandle + 1; numberOfFileEntries--; // Load the destination address only once and during first time, if(firstTime) { dest = (unsigned short int *)(fo -> utf16LFNptr + fileNameLength - reminder - 1); firstTime = FALSE; } } } #endif // found the entry, now populate it if((error = PopulateEntries(fo, fHandle, mode)) == CE_GOOD) { if(createFirstCluster) // if everything is ok, create a first cluster error = CreateFirstCluster(fo); else { } } } else { error = CE_DIR_FULL; } FSerrno = error; return(error); } #endif /****************************************************** Function: CETYPE CreateFirstCluster(FILEOBJ fo) Summary: Create the first cluster for a file Conditions: This function should not be called by the user. Input: fo - The file that contains the first cluster Return Values: CE_GOOD - First cluster created successfully CE_WRITE_ERROR - Cluster creation failed Side Effects: None Description: This function will find an unused cluster, link it to a file's directory entry, and write the entry back to the device. Remarks: None. ******************************************************/ #ifdef ALLOW_WRITES CETYPE CreateFirstCluster(FILEOBJ fo) { CETYPE error; DWORD cluster,TempMsbCluster; WORD fHandle; DIRENTRY dir; fHandle = fo->entry; // Now create the first cluster (head cluster) if((error = FILECreateHeadCluster(fo,&cluster)) == CE_GOOD) { // load the file entry so the new cluster can be linked to it dir = LoadDirAttrib(fo, &fHandle); // Now update the new cluster dir->DIR_FstClusLO = (cluster & 0x0000FFFF); #ifdef SUPPORT_FAT32 // If FAT32 supported. // Get the higher part of cluster and store it in directory entry. TempMsbCluster = (cluster & 0x0FFF0000); // Since only 28 bits usedin FAT32. Mask the higher MSB nibble. TempMsbCluster = TempMsbCluster >> 16; // Get the date into Lsb place. dir->DIR_FstClusHI = TempMsbCluster; #else // If FAT32 support not enabled TempMsbCluster = 0; // Just to avoid compiler warnigng. dir->DIR_FstClusHI = 0; #endif // now write it if(Write_File_Entry(fo, &fHandle) != TRUE) error = CE_WRITE_ERROR; } // Create Cluster return(error); }// End of CreateFirstCluster #endif /********************************************************** Function: BYTE FindEmptyEntries(FILEOBJ fo, WORD *fHandle) Summary: Find an empty dir entry Conditions: This function should not be called by the user. Input: fo - Pointer to file structure fHandle - Start of entries Return Values: TRUE - One found FALSE - None found Side Effects: None Description: This function will cache directory entries, starting with the one pointed to by the fHandle argument. It will then search through the entries until an unused one is found. If the end of the cluster chain for the directory is reached, a new cluster will be allocated to the directory (unless it's a FAT12 or FAT16 root) and the first entry of the new cluster will be used. Remarks: None. **********************************************************/ #ifdef ALLOW_WRITES BYTE FindEmptyEntries(FILEOBJ fo, WORD *fHandle) { BYTE status = NOT_FOUND; BYTE amountfound,numberOfFileEntries; BYTE a = 0; WORD bHandle; DWORD b; DIRENTRY dir; fo->dirccls = fo->dirclus; if((dir = Cache_File_Entry( fo, fHandle, TRUE)) == NULL) { status = CE_BADCACHEREAD; } else { #if defined(SUPPORT_LFN) // If LFN entry if(fo->utf16LFNlength) { // File Name + NULL character is file name length in LFN fileNameLength = fo->utf16LFNlength; // Determine the number of entries for LFN a = fileNameLength % MAX_UTF16_CHARS_IN_LFN_ENTRY; numberOfFileEntries = fileNameLength/MAX_UTF16_CHARS_IN_LFN_ENTRY; if(a || (fileNameLength < MAX_UTF16_CHARS_IN_LFN_ENTRY)) { numberOfFileEntries++; } numberOfFileEntries = numberOfFileEntries + 1; } else #endif numberOfFileEntries = 1; // while its still not found while(status == NOT_FOUND) { amountfound = 0; bHandle = *fHandle; // find (number) continuous entries do { // Get the entry dir = Cache_File_Entry( fo, fHandle, FALSE); // Read the first char of the file name if(dir != NULL) // Last entry of the cluster { a = dir->DIR_Name[0]; } // increase number (*fHandle)++; }while((dir != (DIRENTRY)NULL) && ((a == DIR_DEL) || (a == DIR_EMPTY)) && (++amountfound < numberOfFileEntries)); // --- now why did we exit? if(dir == NULL) // Last entry of the cluster { //setup the current cluster b = fo->dirccls; // write it back // make sure we are not the root directory if(b == FatRootDirClusterValue) { if (fo->dsk->type != FAT32) status = NO_MORE; else { fo->ccls = b; if(FILEallocate_new_cluster(fo, 1) == CE_DISK_FULL) status = NO_MORE; else { *fHandle = bHandle; status = FOUND; // a new cluster will surely hold a new file name } } } else { fo->ccls = b; if(FILEallocate_new_cluster(fo, 1) == CE_DISK_FULL) status = NO_MORE; else { *fHandle = bHandle; status = FOUND; // a new cluster will surely hold a new file name } } } else { if(amountfound == numberOfFileEntries) { status = FOUND; *fHandle = bHandle - numberOfFileEntries + 1; } } }// while // copy the base handle over *fHandle = bHandle; } if(status == FOUND) return(TRUE); else return(FALSE); } #endif /************************************************************************** Function: BYTE PopulateEntries(FILEOBJ fo, WORD *fHandle, BYTE mode) Summary: Populate a dir entry with data Conditions: Should not be called by the user. Input: fo - Pointer to file structure fHandle - Location of the file mode - DIRECTORY mode or ARCHIVE mode Return Values: CE_GOOD - Population successful Side Effects: None Description: This function will write data into a new file entry. It will also load timestamp data (based on the method selected by the user) and update the timestamp variables. Remarks: None. **************************************************************************/ #ifdef ALLOW_WRITES BYTE PopulateEntries(FILEOBJ fo, WORD *fHandle, BYTE mode) { BYTE error = CE_GOOD; DIRENTRY dir; fo->dirccls = fo->dirclus; dir = Cache_File_Entry( fo, fHandle, TRUE); if (dir == NULL) return CE_BADCACHEREAD; // copy the contents over strncpy(dir->DIR_Name,fo->name,DIR_NAMECOMP); // setup no attributes if (mode == DIRECTORY) dir->DIR_Attr = ATTR_DIRECTORY; else dir->DIR_Attr = ATTR_ARCHIVE; dir->DIR_NTRes = 0x00; // nt reserved dir->DIR_FstClusHI = 0x0000; // high word of this enty's first cluster number dir->DIR_FstClusLO = 0x0000; // low word of this entry's first cluster number dir->DIR_FileSize = 0x0; // file size in DWORD // Timing information for uncontrolled clock mode #ifdef INCREMENTTIMESTAMP dir->DIR_CrtTimeTenth = 0xB2; // millisecond stamp dir->DIR_CrtTime = 0x7278; // time created dir->DIR_CrtDate = 0x32B0; // date created dir->DIR_LstAccDate = 0x32B0; // Last Access date dir->DIR_WrtTime = 0x7279; // last update time dir->DIR_WrtDate = 0x32B0; // last update date #endif #ifdef USEREALTIMECLOCK CacheTime(); dir->DIR_CrtTimeTenth = gTimeCrtMS; // millisecond stamp dir->DIR_CrtTime = gTimeCrtTime; // time created // dir->DIR_CrtDate = gTimeCrtDate; // date created (1/1/2004) dir->DIR_LstAccDate = gTimeAccDate; // Last Access date dir->DIR_WrtTime = gTimeWrtTime; // last update time dir->DIR_WrtDate = gTimeWrtDate; // last update date #endif #ifdef USERDEFINEDCLOCK // The user will have set the time before this funciton is called dir->DIR_CrtTimeTenth = gTimeCrtMS; dir->DIR_CrtTime = gTimeCrtTime; dir->DIR_CrtDate = gTimeCrtDate; dir->DIR_LstAccDate = gTimeAccDate; dir->DIR_WrtTime = gTimeWrtTime; dir->DIR_WrtDate = gTimeWrtDate; #endif fo->size = dir->DIR_FileSize; fo->time = dir->DIR_CrtTime; fo->date = dir->DIR_CrtDate; fo->attributes = dir->DIR_Attr; fo->entry = *fHandle; // just write the last entry in if (Write_File_Entry(fo,fHandle) != TRUE) error = CE_WRITE_ERROR; return(error); } /***************************************************************** Function: BOOL Alias_LFN_Object(FILEOBJ fo) Summary: Find the Short file name of the LFN entry Conditions: Long file name should be present. Input: fo - Pointer to file structure Return Values: FOUND - Operation successful NOT_FOUND - Operation failed Side Effects: None Description: This function will find the short file name of the long file name as mentioned in the FAT specs. Remarks: None. *****************************************************************/ #if defined(SUPPORT_LFN) BOOL Alias_LFN_Object(FILEOBJ fo) { FSFILE filePtr1; FSFILE filePtr2; unsigned long int index4; short int lfnIndex,index1,index2; BYTE tempVariable,index; char tempString[8]; char *lfnAliasPtr; unsigned short int *templfnPtr; BOOL result = FALSE; // copy file object over FileObjectCopy(&filePtr1, fo); lfnAliasPtr = (char *)&filePtr1.name[0]; templfnPtr = (unsigned short int *)filePtr1.utf16LFNptr; fileNameLength = fo->utf16LFNlength - 1; // Initially fill the alias name with space characters for(index1 = 0;index1 < FILE_NAME_SIZE_8P3;index1++) { lfnAliasPtr[index1] = ' '; } // find the location where '.' is present for(lfnIndex = fileNameLength - 1;lfnIndex > 0;lfnIndex--) { if (templfnPtr[lfnIndex] == '.') { break; } } index1 = lfnIndex + 1; tempVariable = 0; if(lfnIndex) { index2 = 8; // Complete the extension part as per the FAT specifications for(;((index1 < fileNameLength) && (tempVariable < 3));index1++) { // Convert lower-case to upper-case index = (BYTE)templfnPtr[index1]; if ((index >= 0x61) && (index <= 0x7A)) { lfnAliasPtr[index2++] = index - 0x20; } else if(index == ' ') { continue; } else if ((index == 0x2B) || (index == 0x2C) || (index == 0x3B) || (index == 0x3D) || (index == 0x5B) || (index == 0x5D) || (templfnPtr[index1] > 0xFF)) { lfnAliasPtr[index2++] = '_'; } else { lfnAliasPtr[index2++] = index; } tempVariable++; } index2 = lfnIndex; tempVariable = 0; } else { index2 = fileNameLength; } // Fill the base part as per the FAT specifications for(index1 = 0;((index1 < index2) && (tempVariable < 6));index1++) { // Convert lower-case to upper-case index = (BYTE)templfnPtr[index1]; if ((index >= 0x61) && (index <= 0x7A)) { lfnAliasPtr[tempVariable] = index - 0x20; } else if(index == ' ') { continue; } else if ((index == 0x2B) || (index == 0x2C) || (index == 0x3B) || (index == 0x3D) || (index == 0x5B) || (index == 0x5D) || (templfnPtr[index1] > 0xFF)) { lfnAliasPtr[tempVariable] = '_'; } else { lfnAliasPtr[tempVariable] = index; } tempVariable++; } // Aliasing of the predicted name should append ~1 lfnAliasPtr[tempVariable] = '~'; lfnAliasPtr[tempVariable + 1] = '1'; filePtr1.attributes = ATTR_ARCHIVE; filePtr1.utf16LFNlength = 0; // Try for 9999999 combinations before telling error to the user for(index4 = 1;index4 < (unsigned long int)10000000;index4++) { filePtr1.cluster = 0; filePtr1.ccls = 0; filePtr1.entry = 0; // start at the current directory #ifdef ALLOW_DIRS filePtr1.dirclus = cwdptr->dirclus; filePtr1.dirccls = cwdptr->dirccls; #else filePtr1.dirclus = FatRootDirClusterValue; filePtr1.dirccls = FatRootDirClusterValue; #endif // copy file object over FileObjectCopy(&filePtr2, &filePtr1); // See if the file is found if(FILEfind (&filePtr2, &filePtr1, LOOK_FOR_MATCHING_ENTRY, 0) == CE_GOOD) { tempString[7] = index4 % (BYTE)10 + '0'; tempString[6] = (index4 % (BYTE)100)/10 + '0'; tempString[5] = (index4 % 1000)/100 + '0'; tempString[4] = (index4 % 10000)/1000 + '0'; tempString[3] = (index4 % 100000)/10000 + '0'; tempString[2] = (index4 % 1000000)/100000 + '0'; if((tempString[1] = ((index4 % 10000000)/1000000 + '0')) != '0') { tempString[index = 0] = '~'; } else { for(index = 6;index > 0;index--) { if((tempString[index] == '0') && (tempString[index - 1] == '0')) { tempString[index] = '~'; if(!filePtr1.AsciiEncodingType) { if(index % 2) { for(index2 = index - 1;index2 < 7;index2++) { tempString[index2] = tempString[index2 + 1]; } tempString[7] = ' '; index--; } } break; } } } if(index >= tempVariable) { index1 = tempVariable; } else { index1 = index; } while(index < 8) { filePtr1.name[index1++] = tempString[index++]; } // Store the remaining bytes with leading spaces while(index1 < 8) { filePtr1.name[index1++] = ' '; } } else { // short file name is found.Store it & quit lfnAliasPtr = &fo->name[0]; for(index = 0;index < FILE_NAME_SIZE_8P3;index++) { lfnAliasPtr[index] = filePtr1.name[index]; } result = TRUE; break; } } return(result); } // Alias_LFN_Object #endif #ifdef USEREALTIMECLOCK /************************************************************************* Function: void CacheTime (void) Summary: Automatically store timestamp information from the RTCC Conditions: RTCC module enabled. Should not be called by the user. Return Values: None Side Effects: Modifies global timing variables Description: This function will automatically load information from an RTCC module and use it to update the global timing variables. These can then be used to update file timestamps. Remarks: None. *************************************************************************/ void CacheTime (void) { WORD year, monthday, weekhour, minsec, c, result; BYTE ptr1, ptr0; #if defined (__PIC32MX__) // Added support for PIC32. -Bud (3/4/2008) unsigned int t0, t1; unsigned int d0, d1; do // Get the time { t0=RTCTIME; t1=RTCTIME; }while(t0!=t1); do // Get the date { d0=RTCDATE; d1=RTCDATE; }while(d0!=d1); // Put them in place. year = (WORD)(d0 >> 24); monthday = (WORD)(d0 >> 8); weekhour = (WORD)((d0 & 0x0F) << 8); weekhour |= (WORD)(t0 >> 24); minsec = (WORD)(t0 >> 8); #else if(RCFGCALbits.RTCPTR0) ptr0 = 1; else ptr0 = 0; if (RCFGCALbits.RTCPTR1) ptr1 = 1; else ptr1 = 0; RCFGCALbits.RTCPTR0 = 1; RCFGCALbits.RTCPTR1 = 1; year = RTCVAL; monthday = RTCVAL; weekhour = RTCVAL; minsec = RTCVAL; if (ptr0 == 1) RCFGCALbits.RTCPTR0 = 1; if (ptr1 == 1) RCFGCALbits.RTCPTR1 = 1; #endif c = 0; c += (year & 0x0F); c += ((year & 0xF0) >> 4) * 10; // c equals the last 2 digits of the year from 2000 to 2099 // Add 20 to adjust it to FAT time (from 1980 to 2107) c += 20; // shift the result to bits result = c << 9; if ((monthday & 0x1000) == 0x1000) { c = 10; } else { c = 0; } c += ((monthday & 0x0F00) >> 8); c <<= 5; result |= c; c = (monthday & 0x00F0) >> 4; c *= 10; c += (monthday & 0x000F); result |= c; gTimeCrtDate = result; gTimeWrtDate = result; gTimeAccDate = result; c = ((weekhour & 0x00F0) >> 4) * 10; c += (weekhour & 0x000F); result = c << 11; c = ((minsec & 0xF000) >> 12) * 10; c += (minsec & 0x0F00) >> 8; result |= (c << 5); c = ((minsec & 0x00F0) >> 4) * 10; c += (minsec & 0x000F); // If seconds mod 2 is 1, add 1000 ms if (c % 2) gTimeCrtMS = 100; else gTimeCrtMS = 0; c >>= 1; result |= c; gTimeCrtTime = result; gTimeWrtTime = result; } #endif #ifdef USERDEFINEDCLOCK /*********************************************************************************************************** Function: int SetClockVars (unsigned int year, unsigned char month, unsigned char day, unsigned char hour, unsigned char minute, unsigned char second) Summary: Manually set timestamp variables Conditions: USERDEFINEDCLOCK macro defined in FSconfig.h. Input: year - The year (1980\-2107) month - The month (1\-12) day - The day of the month (1\-31) hour - The hour (0\-23) minute - The minute (0\-59) second - The second (0\-59) Return Values: None Side Effects: Modifies global timing variables Description: Lets the user manually set the timing variables. The values passed in will be converted to the format used by the FAT timestamps. Remarks: Call this before creating a file or directory (set create time) and before closing a file (set last access time, last modified time) ***********************************************************************************************************/ int SetClockVars (unsigned int year, unsigned char month, unsigned char day, unsigned char hour, unsigned char minute, unsigned char second) { unsigned int result; if ((year < 1980) || (year > 2107) || (month < 1) || (month > 12) || (day < 1) || (day > 31) || (hour > 23) || (minute > 59) || (second > 59)) { FSerrno = CE_INVALID_ARGUMENT; return -1; } result = (year - 1980) << 9; result |= (unsigned int)((unsigned int)month << 5); result |= (day); gTimeAccDate = result; gTimeCrtDate = result; gTimeWrtDate = result; result = ((unsigned int)hour << 11); result |= (unsigned int)((unsigned int)minute << 5); result |= (second/2); gTimeCrtTime = result; gTimeWrtTime = result; if (second % 2) gTimeCrtMS = 100; else gTimeCrtMS = 0; FSerrno = CE_GOOD; return 0; } #endif #endif /*********************************************************************** Function: BYTE FILEallocate_new_cluster( FILEOBJ fo, BYTE mode) Summary; Allocate a new cluster to a file Conditions: Should not be called by the user. Input: fo - Pointer to file structure mode - - 0 - Allocate a cluster to a file - 1 - Allocate a cluster to a directory Return Values: CE_GOOD - Cluster allocated CE_DISK_FULL - No clusters available Side Effects: None Description: This function will find an empty cluster on the device using the FATfindEmptyCluster function. It will then mark it as the last cluster in the file in the FAT chain, and link the current last cluster of the passed file to the new cluster. If the new cluster is a directory cluster, it will be erased (so there are no extraneous directory entries). If it's allocated to a non-directory file, it doesn't need to be erased; extraneous data in the cluster will be unviewable because of the file size parameter. Remarks: None. ***********************************************************************/ #ifdef ALLOW_WRITES BYTE FILEallocate_new_cluster( FILEOBJ fo, BYTE mode) { DISK * dsk; DWORD c,curcls; dsk = fo->dsk; c = fo->ccls; // find the next empty cluster c = FATfindEmptyCluster(fo); if (c == 0) // "0" is just an indication as Disk full in the fn "FATfindEmptyCluster()" return CE_DISK_FULL; // mark the cluster as taken, and last in chain if(dsk->type == FAT12) WriteFAT( dsk, c, LAST_CLUSTER_FAT12, FALSE); else if (dsk->type == FAT16) WriteFAT( dsk, c, LAST_CLUSTER_FAT16, FALSE); #ifdef SUPPORT_FAT32 // If FAT32 supported. else WriteFAT( dsk, c, LAST_CLUSTER_FAT32, FALSE); #endif // link current cluster to the new one curcls = fo->ccls; WriteFAT( dsk, curcls, c, FALSE); // update the FILE structure fo->ccls = c; // IF this is a dir, we need to erase the cluster // If it's a file, we can leave it- the file size // will limit the data we see to the data that's been // written if (mode == 1) return (EraseCluster(dsk, c)); else return CE_GOOD; } // allocate new cluster #endif /*********************************************** Function: DWORD FATfindEmptyCluster(FILEOBJ fo) Summary: Find the next available cluster on the device Conditions: This function should not be called by the user. Input: fo - Pointer to file structure Return Values: DWORD - Address of empty cluster 0 - Could not find empty cluster Side Effects: None Description: This function will search through the FAT to find the next available cluster on the device. Remarks: Should not be called by user ***********************************************/ #ifdef ALLOW_WRITES DWORD FATfindEmptyCluster(FILEOBJ fo) { DISK * disk; DWORD value = 0x0; DWORD c,curcls, EndClusterLimit, ClusterFailValue; disk = fo->dsk; c = fo->ccls; /* Settings based on FAT type */ switch (disk->type) { #ifdef SUPPORT_FAT32 // If FAT32 supported. case FAT32: EndClusterLimit = END_CLUSTER_FAT32; ClusterFailValue = CLUSTER_FAIL_FAT32; break; #endif case FAT12: EndClusterLimit = END_CLUSTER_FAT12; ClusterFailValue = CLUSTER_FAIL_FAT16; break; case FAT16: default: EndClusterLimit = END_CLUSTER_FAT16; ClusterFailValue = CLUSTER_FAIL_FAT16; break; } // just in case if(c < 2) c = 2; curcls = c; ReadFAT(disk, c); // sequentially scan through the FAT looking for an empty cluster while(c) { // look at its value if ( (value = ReadFAT(disk, c)) == ClusterFailValue) { c = 0; break; } // check if empty cluster found if (value == CLUSTER_EMPTY) break; c++; // check next cluster in FAT // check if reached last cluster in FAT, re-start from top if ((value == EndClusterLimit) || (c >= (disk->maxcls+2))) c = 2; // check if full circle done, disk full if ( c == curcls) { c = 0; break; } } // scanning for an empty cluster return(c); } #endif /********************************************************************************* Function: void FSGetDiskProperties(FS_DISK_PROPERTIES* properties) Summary: Allows user to get the disk properties (size of disk, free space, etc) Conditions: 1) ALLOW_GET_DISK_PROPERTIES must be defined in FSconfig.h 2) a FS_DISK_PROPERTIES object must be created before the function is called 3) the new_request member of the FS_DISK_PROPERTIES object must be set before calling the function for the first time. This will start a new search. 4) this function should not be called while there is a file open. Close all files before calling this function. Input: properties - a pointer to a FS_DISK_PROPERTIES object where the results should be stored. Return Values: This function returns void. The properties_status of the previous call of this function is located in the properties.status field. This field has the following possible values: FS_GET_PROPERTIES_NO_ERRORS - operation completed without error. Results are in the properties object passed into the function. FS_GET_PROPERTIES_DISK_NOT_MOUNTED - there is no mounted disk. Results in properties object is not valid FS_GET_PROPERTIES_CLUSTER_FAILURE - there was a failure trying to read a cluster from the drive. The results in the properties object is a partial result up until the point of the failure. FS_GET_PROPERTIES_STILL_WORKING - the search for free sectors is still in process. Continue calling this function with the same properties pointer until either the function completes or until the partial results meets the application needs. The properties object contains the partial results of the search and can be used by the application. Side Effects: Can cause errors if called when files are open. Close all files before calling this function. Calling this function without setting the new_request member on the first call can result in undefined behavior and results. Calling this function after a result is returned other than FS_GET_PROPERTIES_STILL_WORKING can result in undefined behavior and results. Description: This function returns the information about the mounted drive. The results member of the properties object passed into the function is populated with the information about the drive. Before starting a new request, the new_request member of the properties input parameter should be set to TRUE. This will initiate a new search request. This function will return before the search is complete with partial results. All of the results except the free_clusters will be correct after the first call. The free_clusters will contain the number of free clusters found up until that point, thus the free_clusters result will continue to grow until the entire drive is searched. If an application only needs to know that a certain number of bytes is available and doesn't need to know the total free size, then this function can be called until the required free size is verified. To continue a search, pass a pointer to the same FS_DISK_PROPERTIES object that was passed in to create the search. A new search request sould be made once this function has returned a value other than FS_GET_PROPERTIES_STILL_WORKING. Continuing a completed search can result in undefined behavior or results. Typical Usage: <code> FS_DISK_PROPERTIES disk_properties; disk_properties.new_request = TRUE; do { FSGetDiskProperties(&disk_properties); } while (disk_properties.properties_status == FS_GET_PROPERTIES_STILL_WORKING); </code> results.disk_format - contains the format of the drive. Valid results are FAT12(1), FAT16(2), or FAT32(3). results.sector_size - the sector size of the mounted drive. Valid values are 512, 1024, 2048, and 4096. results.sectors_per_cluster - the number sectors per cluster. results.total_clusters - the number of total clusters on the drive. This can be used to calculate the total disk size (total_clusters * sectors_per_cluster * sector_size = total size of drive in bytes) results.free_clusters - the number of free (unallocated) clusters on the drive. This can be used to calculate the total free disk size (free_clusters * sectors_per_cluster * sector_size = total size of drive in bytes) Remarks: PIC24F size estimates: Flash - 400 bytes (-Os setting) PIC24F speed estimates: Search takes approximately 7 seconds per Gigabyte of drive space. Speed will vary based on the number of sectors per cluster and the sector size. *********************************************************************************/ #if defined(ALLOW_GET_DISK_PROPERTIES) void FSGetDiskProperties(FS_DISK_PROPERTIES* properties) { BYTE i; DWORD value = 0x0; if(properties->new_request == TRUE) { properties->disk = &gDiskData; properties->results.free_clusters = 0; properties->new_request = FALSE; if(properties->disk->mount != TRUE) { properties->properties_status = FS_GET_PROPERTIES_DISK_NOT_MOUNTED; return; } properties->properties_status = FS_GET_PROPERTIES_STILL_WORKING; properties->results.disk_format = properties->disk->type; properties->results.sector_size = properties->disk->sectorSize; properties->results.sectors_per_cluster = properties->disk->SecPerClus; properties->results.total_clusters = properties->disk->maxcls; /* Settings based on FAT type */ switch (properties->disk->type) { #ifdef SUPPORT_FAT32 // If FAT32 supported. case FAT32: properties->private.EndClusterLimit = END_CLUSTER_FAT32; properties->private.ClusterFailValue = CLUSTER_FAIL_FAT32; break; #endif case FAT16: properties->private.EndClusterLimit = END_CLUSTER_FAT16; properties->private.ClusterFailValue = CLUSTER_FAIL_FAT16; break; case FAT12: properties->private.EndClusterLimit = END_CLUSTER_FAT12; properties->private.ClusterFailValue = CLUSTER_FAIL_FAT16; break; } properties->private.c = 2; properties->private.curcls = properties->private.c; ReadFAT(properties->disk, properties->private.c); } if(properties->disk == NULL) { properties->properties_status = FS_GET_PROPERTIES_DISK_NOT_MOUNTED; return; } if(properties->properties_status != FS_GET_PROPERTIES_STILL_WORKING) { return; } // sequentially scan through the FAT looking for an empty cluster for(i=0;i<255;i++) { // look at its value if ( (value = ReadFAT(properties->disk, properties->private.c)) == properties->private.ClusterFailValue) { properties->properties_status = FS_GET_PROPERTIES_CLUSTER_FAILURE; return; } // check if empty cluster found if (value == CLUSTER_EMPTY) { properties->results.free_clusters++; } properties->private.c++; // check next cluster in FAT // check if reached last cluster in FAT, re-start from top if ((value == properties->private.EndClusterLimit) || (properties->private.c >= (properties->results.total_clusters + 2))) properties->private.c = 2; // check if full circle done, disk full if ( properties->private.c == properties->private.curcls) { properties->properties_status = FS_GET_PROPERTIES_NO_ERRORS; return; } } // scanning for an empty cluster properties->properties_status = FS_GET_PROPERTIES_STILL_WORKING; return; } #endif /************************************************************ Function: int FSfclose(FSFILE *fo) Summary: Update file information and free FSFILE objects Conditions: File opened Input: fo - Pointer to the file to close Return Values: 0 - File closed successfully EOF - Error closing the file Side Effects: The FSerrno variable will be changed. Description: This function will update the directory entry for the file pointed to by 'fo' with the information contained in 'fo,' including the new file size and attributes. Timestamp information will also be loaded based on the method selected by the user and written to the entry as the last modified time and date. The file entry will then be written to the device. Finally, the memory used for the specified file object will be freed from the dynamic heap or the array of FSFILE objects. Remarks: A function to flush data to the device without closing the file can be created by removing the portion of this function that frees the memory and the line that clears the write flag. ************************************************************/ int FSfclose(FSFILE *fo) { WORD fHandle; #ifndef FS_DYNAMIC_MEM WORD fIndex; #endif int error = 72; #ifdef ALLOW_WRITES DIRENTRY dir; #endif FSerrno = CE_GOOD; fHandle = fo->entry; #ifdef ALLOW_WRITES if(fo->flags.write) { if (gNeedDataWrite) { if (flushData()) { FSerrno = CE_WRITE_ERROR; return EOF; } } // Write the current FAT sector to the disk WriteFAT (fo->dsk, 0, 0, TRUE); // Invalidate the currently cached FAT entry so that the next read will // result in an acutal read from the physical media instead of a read // from the RAM cache. gLastFATSectorRead = 0; // Read the FAT entry from the physical media. This is required because // some physical media cache the entries in RAM and only write them // after a time expires for until the sector is accessed again. ReadFAT (fo->dsk, fo->ccls); // Get the file entry dir = LoadDirAttrib(fo, &fHandle); if (dir == NULL) { FSerrno = CE_BADCACHEREAD; error = EOF; return error; } // update the time #ifdef INCREMENTTIMESTAMP IncrementTimeStamp(dir); #elif defined USERDEFINEDCLOCK dir->DIR_WrtTime = gTimeWrtTime; dir->DIR_WrtDate = gTimeWrtDate; #elif defined USEREALTIMECLOCK CacheTime(); dir->DIR_WrtTime = gTimeWrtTime; dir->DIR_WrtDate = gTimeWrtDate; #endif dir->DIR_FileSize = fo->size; dir->DIR_Attr = fo->attributes; // just write the last entry in if(Write_File_Entry(fo,&fHandle)) { // Read the folder entry from the physical media. This is required because // some physical media cache the entries in RAM and only write them // after a time expires for until the sector is accessed again. dir = LoadDirAttrib(fo, &fHandle); error = 0; } else { FSerrno = CE_WRITE_ERROR; error = EOF; } // it's now closed fo->flags.write = FALSE; } #endif #ifdef FS_DYNAMIC_MEM #ifdef SUPPORT_LFN FS_free((unsigned char *)fo->utf16LFNptr); #endif FS_free((unsigned char *)fo); #else for( fIndex = 0; fIndex < FS_MAX_FILES_OPEN; fIndex++ ) { if( fo == &gFileArray[fIndex] ) { gFileSlotOpen[fIndex] = TRUE; break; } } #endif // File opened in read mode if (error == 72) error = 0; return(error); } // FSfclose /******************************************************* Function: void IncrementTimeStamp(DIRENTRY dir) Summary: Automatically set the timestamp to "don't care" data Conditions: Should not be called by the user. Input: dir - Pointer to directory structure Return Values: None Side Effects: None Description: This function will increment the timestamp variable in the 'dir' directory entry. This is used for the don't-care timing method. Remarks: None *******************************************************/ #ifdef INCREMENTTIMESTAMP void IncrementTimeStamp(DIRENTRY dir) { BYTE seconds; BYTE minutes; BYTE hours; BYTE day; BYTE month; BYTE year; seconds = (dir->DIR_WrtTime & 0x1f); minutes = ((dir->DIR_WrtTime & 0x07E0) >> 5); hours = ((dir->DIR_WrtTime & 0xF800) >> 11); day = (dir->DIR_WrtDate & 0x1f); month = ((dir->DIR_WrtDate & 0x01E0) >> 5); year = ((dir->DIR_WrtDate & 0xFE00) >> 9); if(seconds < 29) { // Increment number of seconds by 2 // This clock method isn't intended to be accurate anyway seconds++; } else { seconds = 0x00; if(minutes < 59) { minutes++; } else { minutes = 0; if(hours < 23) { hours++; } else { hours = 0; if(day < 30) { day++; } else { day = 1; if(month < 12) { month++; } else { month = 1; // new year year++; // This is only valid until 2107 } } } } } dir->DIR_WrtTime = (WORD)(seconds); dir->DIR_WrtTime |= ((WORD)(minutes) << 5); dir->DIR_WrtTime |= ((WORD)(hours) << 11); dir->DIR_WrtDate = (WORD)(day); dir->DIR_WrtDate |= ((WORD)(month) << 5); dir->DIR_WrtDate |= ((WORD)(year) << 9); } #endif /***************************************************************** Function: BYTE Fill_File_Object(FILEOBJ fo, WORD *fHandle) Summary: Fill a file object with specified dir entry data Conditions: This function should not be called by the user. Input: fo - Pointer to file structure fHandle - Passed member's location Return Values: FOUND - Operation successful NOT_FOUND - Operation failed Side Effects: None Description: This function will cache the sector of directory entries in the directory pointed to by the dirclus value in the FSFILE object 'fo' that contains the entry that corresponds to the fHandle offset. It will then copy the file information for that entry into the 'fo' FSFILE object. Remarks: None. *****************************************************************/ BYTE Fill_File_Object(FILEOBJ fo, WORD *fHandle) { DIRENTRY dir; BYTE index, a; BYTE character; BYTE status; BYTE test = 0; // Get the entry if (((*fHandle & MASK_MAX_FILE_ENTRY_LIMIT_BITS) == 0) && (*fHandle != 0)) // 4-bit mask because 16-root entries max per sector { fo->dirccls = fo->dirclus; dir = Cache_File_Entry(fo, fHandle, TRUE); } else { dir = Cache_File_Entry (fo, fHandle, FALSE); } // Make sure there is a directory left if(dir == (DIRENTRY)NULL) { status = NO_MORE; } else { // Read the first char of the file name a = dir->DIR_Name[0]; // Check for empty or deleted directory if ( a == DIR_DEL) { status = NOT_FOUND; } else if ( a == DIR_EMPTY) { status = NO_MORE; } else { // Get the attributes a = dir->DIR_Attr; // print the file name and extension for (index=0; index < DIR_NAMESIZE; index++) { character = dir->DIR_Name[index]; character = (BYTE)toupper(character); fo->name[test++] = character; } // Get the attributes a = dir->DIR_Attr; // its possible to have an extension in a directory character = dir->DIR_Extension[0]; // Get the file extension if its there for (index=0; index < DIR_EXTENSION; index++) { character = dir->DIR_Extension[index]; character = (BYTE)toupper(character); fo->name[test++] = character; } // done and done with the name // fo->name[++test] = (BYTE)'\0'; // Now store the identifier fo->entry = *fHandle; // see if we are still a good file a = dir->DIR_Name[0]; if(a == DIR_DEL) status = NOT_FOUND; else status = FOUND; // Now store the size fo->size = (dir->DIR_FileSize); fo->cluster = GetFullClusterNumber(dir); // Get Complete Cluster number. /// -Get and store the attributes a = dir->DIR_Attr; fo->attributes = a; // get the date and time if ((a & ATTR_DIRECTORY) != 0) { fo->time = dir->DIR_CrtTime; fo->date = dir->DIR_CrtDate; } else { fo->time = dir->DIR_WrtTime; fo->date = dir->DIR_WrtDate; } }// deleted directory }// Ensure we are still good return(status); } // Fill_File_Object /***************************************************************** Function: BYTE Fill_LFN_Object(FILEOBJ fo, LFN_ENTRY *lfno, WORD *fHandle) Summary: Fill a LFN object with specified entry data Conditions: This function should not be called by the user. Input: fo - Pointer to file structure lfno - Pointer to Long File Name Object fHandle - Passed member's location Return Values: FOUND - Operation successful NOT_FOUND - Operation failed Side Effects: None Description: This function will cache the sector of LFN entries in the directory pointed to by the dirclus value in the FSFILE object 'fo' that contains the entry that corresponds to the fHandle offset. It will then copy the file information for that entry into the 'fo' FSFILE object. Remarks: None. *****************************************************************/ #if defined(SUPPORT_LFN) BYTE Fill_LFN_Object(FILEOBJ fo, LFN_ENTRY *lfno, WORD *fHandle) { DIRENTRY dir; BYTE tempVariable; BYTE *src,*dst; BYTE status; // Get the entry if (((*fHandle & MASK_MAX_FILE_ENTRY_LIMIT_BITS) == 0) && (*fHandle != 0)) // 4-bit mask because 16-root entries max per sector { fo->dirccls = fo->dirclus; dir = Cache_File_Entry(fo, fHandle, TRUE); } else { dir = Cache_File_Entry (fo, fHandle, FALSE); } // Make sure there is a directory left if(dir == (DIRENTRY)NULL) { status = NO_MORE; } else { // Read the first char of the file name tempVariable = dir->DIR_Name[0]; // Check for empty or deleted directory if ( tempVariable == DIR_DEL) { status = NOT_FOUND; } else if ( tempVariable == DIR_EMPTY) { status = NO_MORE; } else { status = FOUND; dst = (BYTE *)lfno; src = (BYTE *)dir; // Copy the entry in the lfno object for(tempVariable = 0;tempVariable < 32;tempVariable++) { *dst++ = *src++; } }// deleted directory }// Ensure we are still good return(status); } // Fill_File_Object #endif /************************************************************************ Function: DIRENTRY LoadDirAttrib(FILEOBJ fo, WORD *fHandle) Summary: Load file information from a directory entry and cache the entry Conditions: This function should not be called by the user. Input: fo - Pointer to file structure fHandle - Information location Return Values: DIRENTRY - Pointer to the directory entry NULL - Directory entry could not be loaded Side Effects: None Description: This function will cache the sector of directory entries in the directory pointed to by the dirclus value in the FSFILE object 'fo' that contains the entry that corresponds to the fHandle offset. It will then return a pointer to the directory entry in the global data buffer. Remarks: None. ************************************************************************/ DIRENTRY LoadDirAttrib(FILEOBJ fo, WORD *fHandle) { DIRENTRY dir; BYTE a; fo->dirccls = fo->dirclus; // Get the entry dir = Cache_File_Entry( fo, fHandle, TRUE); if (dir == NULL) return NULL; // Read the first char of the file name a = dir->DIR_Name[0]; // Make sure there is a directory left if(a == DIR_EMPTY) dir = (DIRENTRY)NULL; if(dir != (DIRENTRY)NULL) { // Check for empty or deleted directory if ( a == DIR_DEL) dir = (DIRENTRY)NULL; else { // Get the attributes a = dir->DIR_Attr; // scan through all the long dir entries while(a == ATTR_LONG_NAME) { (*fHandle)++; dir = Cache_File_Entry( fo, fHandle, FALSE); if (dir == NULL) return NULL; a = dir->DIR_Attr; } // long file name while loop } // deleted dir }// Ensure we are still good return(dir); } // LoadDirAttrib /************************************************************************** Function: CETYPE FILEerase( FILEOBJ fo, WORD *fHandle, BYTE EraseClusters) Summary: Erase a file Conditions: This function should not be called by the user. Input: fo - Pointer to file structure fHandle - Location of file information EraseClusters - If set to TRUE, delete the corresponding cluster of file Return Values: CE_GOOD - File erased successfully CE_FILE_NOT_FOUND - Could not find the file on the card CE_ERASE_FAIL - Internal Card erase failed Side Effects: None Description: This function will cache the sector of directory entries in the directory pointed to by the dirclus value in the FSFILE object 'fo' that contains the entry that corresponds to the fHandle offset. It will then mark that entry as deleted. If the EraseClusters argument is TRUE, the chain of clusters for that file will be marked as unused in the FAT by the FAT_erase_cluster_chain function. Remarks: None. **************************************************************************/ #ifdef ALLOW_WRITES CETYPE FILEerase( FILEOBJ fo, WORD *fHandle, BYTE EraseClusters) { DIRENTRY dir; BYTE a; CETYPE status = CE_GOOD; DWORD clus = 0; DISK * disk; BYTE numberOfFileEntries; BOOL forFirstTime = TRUE; #if defined(SUPPORT_LFN) BYTE tempCalc1; #endif disk = fo->dsk; #if defined(SUPPORT_LFN) fileNameLength = fo->utf16LFNlength; // Find the number of entries of LFN in the root directory if(fileNameLength) { tempCalc1 = fileNameLength % 13; numberOfFileEntries = fileNameLength/13; if(tempCalc1 || (fileNameLength < 13)) { numberOfFileEntries = numberOfFileEntries + 2; } else { numberOfFileEntries++; } } else #endif { numberOfFileEntries = 1; } FSerrno = CE_ERASE_FAIL; // delete all the entries of LFN in root directory while(numberOfFileEntries--) { // reset the cluster fo->dirccls = fo->dirclus; // load the sector dir = Cache_File_Entry(fo, fHandle, TRUE); if (dir == NULL) { return CE_BADCACHEREAD; } // Fill up the File Object with the information pointed to by fHandle a = dir->DIR_Name[0]; // see if there is something in the dir if((dir == (DIRENTRY)NULL) || (a == DIR_EMPTY) || (a == DIR_DEL)) { status = CE_FILE_NOT_FOUND; break; } else { /* 8.3 File Name - entry*/ dir->DIR_Name[0] = DIR_DEL; // mark as deleted if(!(Write_File_Entry( fo, fHandle))) { status = CE_ERASE_FAIL; break; } } if(forFirstTime) { // Get the starting cluster clus = GetFullClusterNumber(dir); // Get Complete Cluster number. forFirstTime = FALSE; } *fHandle = *fHandle - 1; } if(status == CE_GOOD) { if (clus != FatRootDirClusterValue) // { // If 'EraseClusters' is set to TRUE, erase the cluster chain corresponding to file if(EraseClusters) { /* Now remove the cluster allocation from the FAT */ status = ((FAT_erase_cluster_chain(clus, disk)) ? CE_GOOD : CE_ERASE_FAIL); } } FSerrno = status; } return (status); } #endif /*************************************************************** Function: int FSrename (const rom char * fileName, FSFILE * fo) Summary: Change the name of a file or directory Conditions: File opened. Input: fileName - The new name of the file fo - The file to rename Return Values: 0 - File was renamed successfully EOF - File was not renamed Side Effects: The FSerrno variable will be changed. Description: The FSrename function will rename a file. First, it will search through the current working directory to ensure the specified new filename is not already in use. If it isn't, the new filename will be written to the file entry of the file pointed to by 'fo.' Remarks: None ***************************************************************/ #ifdef ALLOW_WRITES int FSrename (const char * fileName, FSFILE * fo) { WORD fHandle; FSFILE tempFo1,tempFo2; DIRENTRY dir; #ifdef SUPPORT_LFN DWORD TempMsbCluster; #else BYTE j; #endif FSerrno = CE_GOOD; if (MDD_WriteProtectState()) { FSerrno = CE_WRITE_PROTECTED; return (-1); } // copy file object over FileObjectCopy(&tempFo1, fo); //Format the source string if(!FormatFileName(fileName, &tempFo1, 0) ) { FSerrno = CE_INVALID_FILENAME; return -1; } tempFo1.entry = 0; // start at the current directory tempFo1.dirclus = cwdptr->dirclus; tempFo1.dirccls = cwdptr->dirccls; // copy file object over FileObjectCopy(&tempFo2, &tempFo1); // See if the file is found if(FILEfind (&tempFo2, &tempFo1, LOOK_FOR_MATCHING_ENTRY, 0) == CE_FILE_NOT_FOUND) { fHandle = fo->entry; #ifdef SUPPORT_LFN if(CE_GOOD != FILEerase(fo, &fHandle, FALSE)) { FSerrno = CE_ERASE_FAIL; return -1; } // Create the new entry as per the user requested name FSerrno = CreateFileEntry (&tempFo1, &fHandle, tempFo1.attributes, FALSE); // load the file entry so the new cluster can be linked to it dir = LoadDirAttrib(&tempFo1, &fHandle); // Now update the new cluster dir->DIR_FstClusLO = (fo->cluster & 0x0000FFFF); #ifdef SUPPORT_FAT32 // If FAT32 supported. // Get the higher part of cluster and store it in directory entry. TempMsbCluster = (fo->cluster & 0x0FFF0000); // Since only 28 bits usedin FAT32. Mask the higher MSB nibble. TempMsbCluster = TempMsbCluster >> 16; // Get the date into Lsb place. dir->DIR_FstClusHI = TempMsbCluster; #else // If FAT32 support not enabled TempMsbCluster = 0; // Just to avoid compiler warnigng. dir->DIR_FstClusHI = 0; #endif // Update the file size dir->DIR_FileSize = fo->size; // now write it if(Write_File_Entry(&tempFo1, &fHandle) != TRUE) { FSerrno = CE_WRITE_ERROR; return -1; } tempFo1.size = fo->size; // copy file object over FileObjectCopy(fo, &tempFo1); #else // Get the file entry dir = LoadDirAttrib(fo, &fHandle); for (j = 0; j < 11; j++) { fo->name[j] = tempFo1.name[j]; dir->DIR_Name[j] = tempFo1.name[j]; } // just write the last entry in if(!Write_File_Entry(fo,&fHandle)) { FSerrno = CE_WRITE_ERROR; return -1; } #endif } else { FSerrno = CE_FILENAME_EXISTS; return -1; } return 0; } /*************************************************************** Function: int wFSrename (const rom unsigned short int * fileName, FSFILE * fo) Summary: Change the name of a file or directory to the UTF16 input fileName Conditions: File opened. Input: fileName - The new name of the file fo - The file to rename Return Values: 0 - File was renamed successfully EOF - File was not renamed Side Effects: The FSerrno variable will be changed. Description: The wFSrename function will rename a file. First, it will search through the current working directory to ensure the specified new UTF16 filename is not already in use. If it isn't, the new filename will be written to the file entry of the file pointed to by 'fo.' Remarks: None ***************************************************************/ #ifdef SUPPORT_LFN int wFSrename (const unsigned short int * fileName, FSFILE * fo) { int result; utfModeFileName = TRUE; result = FSrename ((const char *)fileName,fo); utfModeFileName = FALSE; return result; } #endif #endif // Allow writes /********************************************************************* Function: FSFILE * wFSfopen (const unsigned short int * fileName, const char *mode) Summary: Open a UTF16 file. Conditions: For read modes, file exists; FSInit performed Input: fileName - The name of the file to open mode - - WRITE - Create a new file or replace an existing file - READ - Read data from an existing file - APPEND - Append data to an existing file - WRITEPLUS - Create a new file or replace an existing file (reads also enabled) - READPLUS - Read data from an existing file (writes also enabled) - APPENDPLUS - Append data to an existing file (reads also enabled) Return Values: FSFILE * - The pointer to the file object NULL - The file could not be opened Side Effects: The FSerrno variable will be changed. Description: This function will open a file or directory. First, RAM in the dynamic heap or static array will be allocated to a new FSFILE object. Then, the specified file name will be formatted to ensure that it's in 8.3 format or LFN format. Next, the FILEfind function will be used to search for the specified file name. If the name is found, one of three things will happen: if the file was opened in read mode, its file info will be loaded using the FILEopen function; if it was opened in write mode, it will be erased, and a new file will be constructed in its place; if it was opened in append mode, its file info will be loaded with FILEopen and the current location will be moved to the end of the file using the FSfseek function. If the file was not found by FILEfind, a new file will be created if the mode was specified as a write or append mode. In these cases, a pointer to the heap or static FSFILE object array will be returned. If the file was not found and the mode was specified as a read mode, the memory allocated to the file will be freed and the NULL pointer value will be returned. Remarks: None. *********************************************************************/ #ifdef SUPPORT_LFN FSFILE * wFSfopen( const unsigned short int * fileName, const char *mode ) { FSFILE *result; utfModeFileName = TRUE; result = FSfopen((const char *)fileName,mode); utfModeFileName = FALSE; return result; } #endif /********************************************************************* Function: FSFILE * FSfopen (const char * fileName, const char *mode) Summary: Open a Ascii file Conditions: For read modes, file exists; FSInit performed Input: fileName - The name of the file to open mode - - WRITE - Create a new file or replace an existing file - READ - Read data from an existing file - APPEND - Append data to an existing file - WRITEPLUS - Create a new file or replace an existing file (reads also enabled) - READPLUS - Read data from an existing file (writes also enabled) - APPENDPLUS - Append data to an existing file (reads also enabled) Return Values: FSFILE * - The pointer to the file object NULL - The file could not be opened Side Effects: The FSerrno variable will be changed. Description: This function will open a file or directory. First, RAM in the dynamic heap or static array will be allocated to a new FSFILE object. Then, the specified file name will be formatted to ensure that it's in 8.3 format or LFN format. Next, the FILEfind function will be used to search for the specified file name. If the name is found, one of three things will happen: if the file was opened in read mode, its file info will be loaded using the FILEopen function; if it was opened in write mode, it will be erased, and a new file will be constructed in its place; if it was opened in append mode, its file info will be loaded with FILEopen and the current location will be moved to the end of the file using the FSfseek function. If the file was not found by FILEfind, a new file will be created if the mode was specified as a write or append mode. In these cases, a pointer to the heap or static FSFILE object array will be returned. If the file was not found and the mode was specified as a read mode, the memory allocated to the file will be freed and the NULL pointer value will be returned. Remarks: None. *********************************************************************/ FSFILE * FSfopen( const char * fileName, const char *mode ) { FILEOBJ filePtr; #ifndef FS_DYNAMIC_MEM int fIndex; #endif BYTE ModeC; WORD fHandle; CETYPE final; #ifdef FS_DYNAMIC_MEM filePtr = (FILEOBJ) FS_malloc(sizeof(FSFILE)); #else filePtr = NULL; //Pick available file structure for( fIndex = 0; fIndex < FS_MAX_FILES_OPEN; fIndex++ ) { if( gFileSlotOpen[fIndex] ) //this slot is available { gFileSlotOpen[fIndex] = FALSE; filePtr = &gFileArray[fIndex]; break; } } if( filePtr == NULL ) { FSerrno = CE_TOO_MANY_FILES_OPEN; return NULL; //no file structure slot available } #endif #if defined(SUPPORT_LFN) #if defined(FS_DYNAMIC_MEM) filePtr -> utf16LFNptr = (unsigned short int *)FS_malloc(514); #else filePtr->utf16LFNptr = &lfnData[fIndex][0]; #endif #endif //Format the source string. if( !FormatFileName(fileName, filePtr, 0) ) { #ifdef FS_DYNAMIC_MEM #if defined(SUPPORT_LFN) FS_free((unsigned char *)filePtr->utf16LFNptr); #endif FS_free( (unsigned char *)filePtr ); #else gFileSlotOpen[fIndex] = TRUE; //put this slot back to the pool #endif FSerrno = CE_INVALID_FILENAME; return NULL; //bad filename } //Read the mode character ModeC = mode[0]; filePtr->dsk = &gDiskData; filePtr->cluster = 0; filePtr->ccls = 0; filePtr->entry = 0; filePtr->attributes = ATTR_ARCHIVE; // start at the current directory #ifdef ALLOW_DIRS filePtr->dirclus = cwdptr->dirclus; filePtr->dirccls = cwdptr->dirccls; #else filePtr->dirclus = FatRootDirClusterValue; filePtr->dirccls = FatRootDirClusterValue; #endif // copy file object over FileObjectCopy(&gFileTemp, filePtr); // See if the file is found if(FILEfind (filePtr, &gFileTemp, LOOK_FOR_MATCHING_ENTRY, 0) == CE_GOOD) { // File is Found switch(ModeC) { #ifdef ALLOW_WRITES case 'w': case 'W': { // File exists, we want to create a new one, remove it first fHandle = filePtr->entry; final = FILEerase(filePtr, &fHandle, TRUE); if (final == CE_GOOD) { // now create a new one final = CreateFileEntry (filePtr, &fHandle, 0, TRUE); if (final == CE_GOOD) { final = FILEopen (filePtr, &fHandle, 'w'); if (filePtr->attributes & ATTR_DIRECTORY) { FSerrno = CE_INVALID_ARGUMENT; final = 0xFF; } if (final == CE_GOOD) { final = FSfseek (filePtr, 0, SEEK_END); if (mode[1] == '+') filePtr->flags.read = 1; } } } break; } case 'A': case 'a': { if(filePtr->size != 0) { fHandle = filePtr->entry; final = FILEopen (filePtr, &fHandle, 'w'); if (filePtr->attributes & ATTR_DIRECTORY) { FSerrno = CE_INVALID_ARGUMENT; final = 0xFF; } if (final == CE_GOOD) { final = FSfseek (filePtr, 0, SEEK_END); if (final != CE_GOOD) FSerrno = CE_SEEK_ERROR; else ReadFAT (&gDiskData, filePtr->ccls); if (mode[1] == '+') filePtr->flags.read = 1; } } else { fHandle = filePtr->entry; final = FILEerase(filePtr, &fHandle, TRUE); if (final == CE_GOOD) { // now create a new one final = CreateFileEntry (filePtr, &fHandle, 0, TRUE); if (final == CE_GOOD) { final = FILEopen (filePtr, &fHandle, 'w'); if (filePtr->attributes & ATTR_DIRECTORY) { FSerrno = CE_INVALID_ARGUMENT; final = 0xFF; } if (final == CE_GOOD) { final = FSfseek (filePtr, 0, SEEK_END); if (final != CE_GOOD) FSerrno = CE_SEEK_ERROR; if (mode[1] == '+') filePtr->flags.read = 1; } } } } break; } #endif case 'R': case 'r': { fHandle = filePtr->entry; final = FILEopen (filePtr, &fHandle, 'r'); #ifdef ALLOW_WRITES if ((mode[1] == '+') && !(filePtr->attributes & ATTR_DIRECTORY)) filePtr->flags.write = 1; #endif break; } default: FSerrno = CE_INVALID_ARGUMENT; final = 0xFF;; //indicate error condition break; } } else { #ifdef ALLOW_WRITES // the file was not found, reset to the default asked FileObjectCopy(filePtr, &gFileTemp); // File is not Found if((ModeC == 'w') || (ModeC == 'W') || (ModeC == 'a') || (ModeC == 'A')) { // use the user requested name fHandle = 0; final = CreateFileEntry (filePtr, &fHandle, 0, TRUE); if (final == CE_GOOD) { final = FILEopen (filePtr, &fHandle, 'w'); if (filePtr->attributes & ATTR_DIRECTORY) { FSerrno = CE_INVALID_ARGUMENT; final = 0xFF; } if (final == CE_GOOD) { final = FSfseek (filePtr, 0, SEEK_END); if (final != CE_GOOD) FSerrno = CE_SEEK_ERROR; if (mode[1] == '+') filePtr->flags.read = 1; } } } else #endif final = CE_FILE_NOT_FOUND; } if (MDD_WriteProtectState()) { filePtr->flags.write = 0;; } #ifdef FS_DYNAMIC_MEM if( final != CE_GOOD ) { #ifdef SUPPORT_LFN FS_free((unsigned char *)filePtr->utf16LFNptr); #endif FS_free( (unsigned char *)filePtr ); filePtr = NULL; } #else if( final != CE_GOOD ) { gFileSlotOpen[fIndex] = TRUE; //put this slot back to the pool filePtr = NULL; } #endif else { FSerrno = CE_GOOD; } return filePtr; } /******************************************************************* Function: long FSftell (FSFILE * fo) Summary: Determine the current location in a file Conditions: File opened Input: fo - Pointer to file structure Return: Current location in the file Side Effects: The FSerrno variable will be changed Description: The FSftell function will return the current position in the file pointed to by 'fo' by returning the 'seek' variable in the FSFILE object, which is used to keep track of the absolute location of the current position in the file. Remarks: None *******************************************************************/ long FSftell (FSFILE * fo) { FSerrno = CE_GOOD; return (fo->seek); } #ifdef ALLOW_WRITES /********************************************************************* Function: int FSremove (const char * fileName) Summary: Delete a Ascii file Conditions: File not opened, file exists Input: fileName - Name of the file to erase Return Values: 0 - File removed EOF - File was not removed Side Effects: The FSerrno variable will be changed. Description: The FSremove function will attempt to find the specified file with the FILEfind function. If the file is found, it will be erased using the FILEerase function. The user can also provide ascii alias name of the ascii long file name as the input to this function to get it erased from the memory. Remarks: None **********************************************************************/ int FSremove (const char * fileName) { FILEOBJ fo = &tempCWDobj; #ifdef SUPPORT_LFN FSFILE cwdTemp; char tempArray[514]; LFN_ENTRY *lfno; WORD prevHandle; unsigned short int i = 0; #endif FSerrno = CE_GOOD; if (MDD_WriteProtectState()) { FSerrno = CE_WRITE_PROTECTED; return (-1); } //Format the source string #if defined(SUPPORT_LFN) fo->utf16LFNptr = (unsigned short int *)&tempArray[0]; #endif if( !FormatFileName(fileName, fo, 0) ) { FSerrno = CE_INVALID_FILENAME; return -1; } fo->dsk = &gDiskData; fo->cluster = 0; fo->ccls = 0; fo->entry = 0; fo->attributes = ATTR_ARCHIVE; #ifndef ALLOW_DIRS // start at the root directory fo->dirclus = FatRootDirClusterValue; fo->dirccls = FatRootDirClusterValue; #else fo->dirclus = cwdptr->dirclus; fo->dirccls = cwdptr->dirccls; #endif // copy file object over FileObjectCopy(&gFileTemp, fo); // See if the file is found if (FILEfind (fo, &gFileTemp, LOOK_FOR_MATCHING_ENTRY, 0) != CE_GOOD) { FSerrno = CE_FILE_NOT_FOUND; return -1; } if (fo->attributes & ATTR_DIRECTORY) { FSerrno = CE_DELETE_DIR; return -1; } // Find the long file name assosciated with the short file name if present #ifdef SUPPORT_LFN if(!fo->utf16LFNlength) { FileObjectCopy (&cwdTemp, fo); prevHandle = fo->entry - 1; lfno = (LFN_ENTRY *)Cache_File_Entry (fo, &prevHandle, FALSE); while((lfno->LFN_Attribute == ATTR_LONG_NAME) && (lfno->LFN_SequenceNo != DIR_DEL) && (lfno->LFN_SequenceNo != DIR_EMPTY)) { i = i + MAX_UTF16_CHARS_IN_LFN_ENTRY; prevHandle = prevHandle - 1; lfno = (LFN_ENTRY *)Cache_File_Entry (fo, &prevHandle, FALSE); } FileObjectCopy (fo, &cwdTemp); // Find the length of LFN file fo->utf16LFNlength = i; } #endif // Erase the file if( FILEerase(fo, &fo->entry, TRUE) == CE_GOOD ) return 0; else { FSerrno = CE_ERASE_FAIL; return -1; } } /********************************************************************* Function: int wFSremove (const unsigned short int * fileName) Summary: Delete a UTF16 file Conditions: File not opened, file exists Input: fileName - Name of the file to erase Return Values: 0 - File removed EOF - File was not removed Side Effects: The FSerrno variable will be changed. Description: The wFSremove function will attempt to find the specified UTF16 file name with the FILEfind function. If the file is found, it will be erased using the FILEerase function. Remarks: None **********************************************************************/ #ifdef SUPPORT_LFN int wFSremove (const unsigned short int * fileName) { int result; utfModeFileName = TRUE; result = FSremove ((const char *)fileName); utfModeFileName = FALSE; return result; } #endif #endif /********************************************************* Function: void FSrewind (FSFILE * fo) Summary: Set the current position in a file to the beginning Conditions: File opened. Input: fo - Pointer to file structure Return Values: None Side Effects: None. Description: The FSrewind funciton will reset the position of the specified file to the beginning of the file. This functionality is faster than using FSfseek to reset the position in the file. Remarks: None. *********************************************************/ void FSrewind (FSFILE * fo) { #ifdef ALLOW_WRITES if (gNeedDataWrite) flushData(); #endif fo->seek = 0; fo->pos = 0; fo->sec = 0; fo->ccls = fo->cluster; gBufferOwner = NULL; return; } /************************************************************************** Function: int FSerror (void) Summary: Return an error code for the last function call Conditions: The return value depends on the last function called. Input: None Side Effects: None. Return Values: FSInit - - CE_GOOD – No Error - CE_INIT_ERROR – The physical media could not be initialized - CE_BAD_SECTOR_READ – The MBR or the boot sector could not be read correctly - CE_BAD_PARITION – The MBR signature code was incorrect. - CE_NOT_FORMATTED – The boot sector signature code was incorrect or indicates an invalid number of bytes per sector. - CE_UNSUPPORTED_SECTOR_SIZE - The number of bytes per sector is unsupported - CE_CARDFAT32 – The physical media is FAT32 type (only an error when FAT32 support is disabled). - CE_UNSUPPORTED_FS – The device is formatted with an unsupported file system (not FAT12 or 16). FSfopen - - CE_GOOD – No Error - CE_NOT_INIT – The device has not been initialized. - CE_TOO_MANY_FILES_OPEN – The function could not allocate any additional file information to the array of FSFILE structures or the heap. - CE_INVALID_FILENAME – The file name argument was invalid. - CE_INVALID_ARGUMENT – The user attempted to open a directory in a write mode or specified an invalid mode argument. - CE_FILE_NOT_FOUND – The specified file (which was to be opened in read mode) does not exist on the device. - CE_BADCACHEREAD – A read from the device failed. - CE_ERASE_FAIL – The existing file could not be erased (when opening a file in WRITE mode). - CE_DIR_FULL – The directory is full. - CE_DISK_FULL– The data memory section is full. - CE_WRITE_ERROR – A write to the device failed. - CE_SEEK_ERROR – The current position in the file could not be set to the end (when the file was opened in APPEND mode). FSfclose - - CE_GOOD – No Error - CE_WRITE_ERROR – The existing data in the data buffer or the new file entry information could not be written to the device. - CE_BADCACHEREAD – The file entry information could not be cached FSfread - - CE_GOOD – No Error - CE_WRITEONLY – The file was opened in a write-only mode. - CE_WRITE_ERROR – The existing data in the data buffer could not be written to the device. - CE_BAD_SECTOR_READ – The data sector could not be read. - CE_EOF – The end of the file was reached. - CE_COULD_NOT_GET_CLUSTER – Additional clusters in the file could not be loaded. FSfwrite - - CE_GOOD – No Error - CE_READONLY – The file was opened in a read-only mode. - CE_WRITE_PROTECTED – The device write-protect check function indicated that the device has been write-protected. - CE_WRITE_ERROR – There was an error writing data to the device. - CE_BADCACHEREAD – The data sector to be modified could not be read from the device. - CE_DISK_FULL – All data clusters on the device are in use. FSfseek - - CE_GOOD – No Error - CE_WRITE_ERROR – The existing data in the data buffer could not be written to the device. - CE_INVALID_ARGUMENT – The specified offset exceeds the size of the file. - CE_BADCACHEREAD – The sector that contains the new current position could not be loaded. - CE_COULD_NOT_GET_CLUSTER – Additional clusters in the file could not be loaded/allocated. FSftell - - CE_GOOD – No Error FSattrib - - CE_GOOD – No Error - CE_INVALID_ARGUMENT – The attribute argument was invalid. - CE_BADCACHEREAD – The existing file entry information could not be loaded. - CE_WRITE_ERROR – The file entry information could not be written to the device. FSrename - - CE_GOOD – No Error - CE_FILENOTOPENED – A null file pointer was passed into the function. - CE_INVALID_FILENAME – The file name passed into the function was invalid. - CE_BADCACHEREAD – A read from the device failed. - CE_FILENAME_EXISTS – A file with the specified name already exists. - CE_WRITE_ERROR – The new file entry data could not be written to the device. FSfeof - - CE_GOOD – No Error FSformat - - CE_GOOD – No Error - CE_INIT_ERROR – The device could not be initialized. - CE_BADCACHEREAD – The master boot record or boot sector could not be loaded successfully. - CE_INVALID_ARGUMENT – The user selected to create their own boot sector on a device that has no master boot record, or the mode argument was invalid. - CE_WRITE_ERROR – The updated MBR/Boot sector could not be written to the device. - CE_BAD_PARTITION – The calculated number of sectors per clusters was invalid. - CE_NONSUPPORTED_SIZE – The card has too many sectors to be formatted as FAT12 or FAT16. FSremove - - CE_GOOD – No Error - CE_WRITE_PROTECTED – The device write-protect check function indicated that the device has been write-protected. - CE_INVALID_FILENAME – The specified filename was invalid. - CE_FILE_NOT_FOUND – The specified file could not be found. - CE_ERASE_FAIL – The file could not be erased. FSchdir - - CE_GOOD – No Error - CE_INVALID_ARGUMENT – The path string was mis-formed or the user tried to change to a non-directory file. - CE_BADCACHEREAD – A directory entry could not be cached. - CE_DIR_NOT_FOUND – Could not find a directory in the path. FSgetcwd - - CE_GOOD – No Error - CE_INVALID_ARGUMENT – The user passed a 0-length buffer into the function. - CE_BADCACHEREAD – A directory entry could not be cached. - CE_BAD_SECTOR_READ – The function could not determine a previous directory of the current working directory. FSmkdir - - CE_GOOD – No Error - CE_WRITE_PROTECTED – The device write-protect check function indicated that the device has been write-protected. - CE_INVALID_ARGUMENT – The path string was mis-formed. - CE_BADCACHEREAD – Could not successfully change to a recently created directory to store its dir entry information, or could not cache directory entry information. - CE_INVALID_FILENAME – One or more of the directory names has an invalid format. - CE_WRITE_ERROR – The existing data in the data buffer could not be written to the device or the dot/dotdot entries could not be written to a newly created directory. - CE_DIR_FULL – There are no available dir entries in the CWD. - CE_DISK_FULL – There are no available clusters in the data region of the device. FSrmdir - - CE_GOOD – No Error - CE_DIR_NOT_FOUND – The directory specified could not be found or the function could not change to a subdirectory within the directory to be deleted (when recursive delete is enabled). - CE_INVALID_ARGUMENT – The user tried to remove the CWD or root directory. - CE_BADCACHEREAD – A directory entry could not be cached. - CE_DIR_NOT_EMPTY – The directory to be deleted was not empty and recursive subdirectory removal was disabled. - CE_ERASE_FAIL – The directory or one of the directories or files within it could not be deleted. - CE_BAD_SECTOR_READ – The function could not determine a previous directory of the CWD. SetClockVars - - CE_GOOD – No Error - CE_INVALID_ARGUMENT – The time values passed into the function were invalid. FindFirst - - CE_GOOD – No Error - CE_INVALID_FILENAME – The specified filename was invalid. - CE_FILE_NOT_FOUND – No file matching the specified criteria was found. - CE_BADCACHEREAD – The file information for the file that was found could not be cached. FindNext - - CE_GOOD – No Error - CE_NOT_INIT – The SearchRec object was not initialized by a call to FindFirst. - CE_INVALID_ARGUMENT – The SearchRec object was initialized in a different directory from the CWD. - CE_INVALID_FILENAME – The filename is invalid. - CE_FILE_NOT_FOUND – No file matching the specified criteria was found. FSfprintf - - CE_GOOD – No Error - CE_WRITE_ERROR – Characters could not be written to the file. Description: The FSerror function will return the FSerrno variable. This global variable will have been set to an error value during the last call of a library function. Remarks: None **************************************************************************/ int FSerror (void) { return FSerrno; } /************************************************************** Function: void FileObjectCopy(FILEOBJ foDest,FILEOBJ foSource) Summary: Copy a file object Conditions: This function should not be called by the user. Input: foDest - The destination foSource - the source Return: None Side Effects: None Description: The FileObjectCopy function will make an exacy copy of a specified FSFILE object. Remarks: None **************************************************************/ void FileObjectCopy(FILEOBJ foDest,FILEOBJ foSource) { int size; BYTE *dest; BYTE *source; int Index; dest = (BYTE *)foDest; source = (BYTE *)foSource; size = sizeof(FSFILE); for(Index=0;Index< size; Index++) { dest[Index] = source[Index]; } } /************************************************************************* Function: CETYPE FILECreateHeadCluster( FILEOBJ fo, DWORD *cluster) Summary: Create the first cluster of a file Conditions: This function should not be called by the user. Input: fo - Pointer to file structure cluster - Cluster location Return Values: CE_GOOD - File closed successfully CE_WRITE_ERROR - Could not write to the sector CE_DISK_FULL - All clusters in partition are taken Side Effects: None Description: The FILECreateHeadCluster function will create the first cluster of a file. First, it will find an empty cluster with the FATfindEmptyCluster function and mark it as the last cluster in the file. It will then erase the cluster using the EraseCluster function. Remarks: None. *************************************************************************/ #ifdef ALLOW_WRITES CETYPE FILECreateHeadCluster( FILEOBJ fo, DWORD *cluster) { DISK * disk; CETYPE error = CE_GOOD; disk = fo->dsk; // find the next empty cluster *cluster = FATfindEmptyCluster(fo); if(*cluster == 0) // "0" is just an indication as Disk full in the fn "FATfindEmptyCluster()" { error = CE_DISK_FULL; } else { // mark the cluster as taken, and last in chain if(disk->type == FAT12) { if(WriteFAT( disk, *cluster, LAST_CLUSTER_FAT12, FALSE) == CLUSTER_FAIL_FAT16) { error = CE_WRITE_ERROR; } } else if(disk->type == FAT16) { if(WriteFAT( disk, *cluster, LAST_CLUSTER_FAT16, FALSE) == CLUSTER_FAIL_FAT16) { error = CE_WRITE_ERROR; } } #ifdef SUPPORT_FAT32 // If FAT32 supported. else { if(WriteFAT( disk, *cluster, LAST_CLUSTER_FAT32, FALSE) == CLUSTER_FAIL_FAT32) { error = CE_WRITE_ERROR; } } #endif // lets erase this cluster if(error == CE_GOOD) { error = EraseCluster(disk,*cluster); } } return(error); } // allocate head cluster #endif /************************************************************************* Function: BYTE EraseCluster(DISK *disk, DWORD cluster) Summary: Erase a cluster Conditions: This function should not be called by the user. Input: dsk - Disk structure cluster - Cluster to be erased Return Values: CE_GOOD - File closed successfully CE_WRITE_ERROR - Could not write to the sector Side Effects: None Description: The EraseCluster function will write a 0 value into every byte of the specified cluster. Remarks: None. *************************************************************************/ #ifdef ALLOW_WRITES BYTE EraseCluster(DISK *disk, DWORD cluster) { BYTE index; DWORD SectorAddress; BYTE error = CE_GOOD; SectorAddress = Cluster2Sector(disk,cluster); if (gNeedDataWrite) if (flushData()) return CE_WRITE_ERROR; gBufferOwner = NULL; if (gBufferZeroed == FALSE) { // clear out the memory first memset(disk->buffer, 0x00, disk->sectorSize); gBufferZeroed = TRUE; } // Now clear them out for(index = 0; (index < disk->SecPerClus) && (error == CE_GOOD); index++) { if (MDD_SectorWrite( SectorAddress++, disk->buffer, FALSE) != TRUE) error = CE_WRITE_ERROR; } return(error); } #endif #if defined (__C30__) || defined (__PIC32MX__) /*************************************************** Function: BYTE ReadByte(BYTE * pBuffer, WORD index) Summary: Read a byte from a buffer Conditions: This function should not be called by the user. Input: pBuffer - pointer to a buffer to read from index - index in the buffer to read to Return: BYTE - the byte read Side Effects: None Description: Reads a byte from a buffer Remarks: None. ***************************************************/ BYTE ReadByte( BYTE* pBuffer, WORD index ) { return( pBuffer[index] ); } /*************************************************** Function: BYTE ReadWord(BYTE * pBuffer, WORD index) Summary: Read a 16-bit word from a buffer Conditions: This function should not be called by the user. Input: pBuffer - pointer to a buffer to read from index - index in the buffer to read to Return: WORD - the word read Side Effects: None Description: Reads a 16-bit word from a buffer Remarks: None. ***************************************************/ WORD ReadWord( BYTE* pBuffer, WORD index ) { BYTE loByte, hiByte; WORD res; loByte = pBuffer[index]; hiByte = pBuffer[index+1]; res = hiByte; res *= 0x100; res |= loByte; return( res ); } /**************************************************** Function: BYTE ReadDWord(BYTE * pBuffer, WORD index) Summary: Read a 32-bit double word from a buffer Conditions: This function should not be called by the user. Input: pBuffer - pointer to a buffer to read from index - index in the buffer to read to Return: DWORD - the double word read Side Effects: None Description: Reads a 32-bit double word from a buffer Remarks: None. ****************************************************/ DWORD ReadDWord( BYTE* pBuffer, WORD index ) { WORD loWord, hiWord; DWORD result; loWord = ReadWord( pBuffer, index ); hiWord = ReadWord( pBuffer, index+2 ); result = hiWord; result *= 0x10000; result |= loWord; return result; } #endif /**************************************************** Function: DWORD Cluster2Sector(DISK * dsk, DWORD cluster) Summary: Convert a cluster number to the corresponding sector Conditions: This function should not be called by the user. Input: disk - Disk structure cluster - Cluster to be converted Return: sector - Sector that corresponds to given cluster Side Effects: None Description: The Cluster2Sector function will calculate the sector number that corresponds to the first sector of the cluster whose value was passed into the function. Remarks: None. ****************************************************/ DWORD Cluster2Sector(DISK * dsk, DWORD cluster) { DWORD sector; /* Rt: Settings based on FAT type */ switch (dsk->type) { #ifdef SUPPORT_FAT32 // If FAT32 supported. case FAT32: /* In FAT32, there is no separate ROOT region. It is as well stored in DATA region */ sector = (((DWORD)cluster-2) * dsk->SecPerClus) + dsk->data; break; #endif case FAT12: case FAT16: default: // The root dir takes up cluster 0 and 1 if((cluster == 0) || (cluster == 1)) sector = dsk->root + cluster; else sector = (((DWORD)cluster-2) * dsk->SecPerClus) + dsk->data; break; } return(sector); } /*************************************************************************** Function: int FSattrib (FSFILE * file, unsigned char attributes) Summary: Change the attributes of a file Conditions: File opened Input: file - Pointer to file structure attributes - The attributes to set for the file - Attribute - Value - Indications - ATTR_READ_ONLY - 0x01 - The read-only attribute - ATTR_HIDDEN - 0x02 - The hidden attribute - ATTR_SYSTEM - 0x04 - The system attribute - ATTR_ARCHIVE - 0x20 - The archive attribute Return Values: 0 - Attribute change was successful -1 - Attribute change was unsuccessful Side Effects: The FSerrno variable will be changed. Description: The FSattrib funciton will set the attributes of the specified file to the attributes passed in by the user. This function will load the file entry, replace the attributes with the ones specified, and write the attributes back. If the specified file is a directory, the directory attribute will be preserved. Remarks: None ***************************************************************************/ #ifdef ALLOW_WRITES int FSattrib (FSFILE * file, unsigned char attributes) { WORD fHandle; DIRENTRY dir; FSerrno = CE_GOOD; // Check for valid attributes if ((attributes & ~0x27) != 0) { FSerrno = CE_INVALID_ARGUMENT; return -1; } fHandle = file->entry; file->dirccls = file->dirclus; // Get the file entry dir = LoadDirAttrib(file, &fHandle); if (dir == NULL) { FSerrno = CE_BADCACHEREAD; return -1; } // Ensure that we aren't trying to change the // attributes of a volume entry if (dir->DIR_Attr & ATTR_VOLUME) { FSerrno = CE_INVALID_ARGUMENT; return -1; } // Don't remove the directory attribute from DIR files if (file->attributes & ATTR_DIRECTORY) file->attributes = attributes | ATTR_DIRECTORY; else file->attributes = attributes; // just write the last entry in if(!Write_File_Entry(file,&fHandle)) { FSerrno = CE_WRITE_ERROR; return -1; } return 0; } #endif /********************************************************************************* Function: size_t FSfwrite(const void *data_to_write, size_t size, size_t n, FSFILE *stream) Summary: Write data to a file Conditions: File opened in WRITE, APPEND, WRITE+, APPEND+, READ+ mode Input: data_to_write - Pointer to source buffer size - Size of units in bytes n - Number of units to transfer stream - Pointer to file structure Return: size_t - number of units written Side Effects: The FSerrno variable will be changed. Description: The FSfwrite function will write data to a file. First, the sector that corresponds to the current position in the file will be loaded (if it hasn't already been cached in the global data buffer). Data will then be written to the device from the specified buffer until the specified amount has been written. If the end of a cluster is reached, the next cluster will be loaded, unless the end-of-file flag for the specified file has been set. If it has, a new cluster will be allocated to the file. Finally, the new position and filesize will be stored in the FSFILE object. The parameters 'size' and 'n' indicate how much data to write. 'Size' refers to the size of one object to write (in bytes), and 'n' will refer to the number of these objects to write. The value returned will be equal to 'n' unless an error occured. Remarks: None. *********************************************************************************/ #ifdef ALLOW_WRITES size_t FSfwrite(const void *data_to_write, size_t size, size_t n, FSFILE *stream) { DWORD count = size * n; BYTE * src = (BYTE *) data_to_write; DISK * dsk; // pointer to disk structure CETYPE error = CE_GOOD; WORD pos; DWORD l; // absolute lba of sector to load DWORD seek, filesize; WORD writeCount = 0; // see if the file was opened in a write mode if(!(stream->flags.write)) { FSerrno = CE_READONLY; error = CE_WRITE_ERROR; return 0; } if (count == 0) return 0; if (MDD_WriteProtectState()) { FSerrno = CE_WRITE_PROTECTED; error = CE_WRITE_PROTECTED; return 0; } gBufferZeroed = FALSE; dsk = stream->dsk; // get the stated position pos = stream->pos; seek = stream->seek; l = Cluster2Sector(dsk,stream->ccls); l += (WORD)stream->sec; // add the sector number to it // Check if the current stream was the last one to use the // buffer. If not, check if we need to write data from the // old stream if (gBufferOwner != stream) { if (gNeedDataWrite) { if (flushData()) { FSerrno = CE_WRITE_ERROR; return 0; } } gBufferOwner = stream; } if (gLastDataSectorRead != l) { if (gNeedDataWrite) { if (flushData()) { FSerrno = CE_WRITE_ERROR; return 0; } } gBufferZeroed = FALSE; if(!MDD_SectorRead( l, dsk->buffer) ) { FSerrno = CE_BADCACHEREAD; error = CE_BAD_SECTOR_READ; } gLastDataSectorRead = l; } // exit loop if EOF reached filesize = stream->size; // Loop while writing bytes while ((error == CE_GOOD) && (count > 0)) { if( seek == filesize ) stream->flags.FileWriteEOF = TRUE; // load a new sector if necessary, multiples of sector if (pos == dsk->sectorSize) { BYTE needRead = TRUE; if (gNeedDataWrite) if (flushData()) { FSerrno = CE_WRITE_ERROR; return 0; } // reset position pos = 0; // point to the next sector stream->sec++; // get a new cluster if necessary if (stream->sec == dsk->SecPerClus) { stream->sec = 0; if(stream->flags.FileWriteEOF) { error = FILEallocate_new_cluster(stream, 0); // add new cluster to the file needRead = FALSE; } else error = FILEget_next_cluster( stream, 1); } if (error == CE_DISK_FULL) { FSerrno = CE_DISK_FULL; return 0; } if(error == CE_GOOD) { l = Cluster2Sector(dsk,stream->ccls); l += (WORD)stream->sec; // add the sector number to it gBufferOwner = stream; // If we just allocated a new cluster, then the cluster will // contain garbage data, so it doesn't matter what we write to it // Whatever is in the buffer will work fine if (needRead) { if( !MDD_SectorRead( l, dsk->buffer) ) { FSerrno = CE_BADCACHEREAD; error = CE_BAD_SECTOR_READ; gLastDataSectorRead = 0xFFFFFFFF; return 0; } else { gLastDataSectorRead = l; } } else gLastDataSectorRead = l; } } // load new sector if(error == CE_GOOD) { // Write one byte at a time RAMwrite(dsk->buffer, pos++, *(char *)src); src = src + 1; // compiler bug seek++; count--; writeCount++; // now increment the size of the part if(stream->flags.FileWriteEOF) filesize++; gNeedDataWrite = TRUE; } } // while count // save off the positon stream->pos = pos; // save off the seek stream->seek = seek; // now the new size stream->size = filesize; return(writeCount / size); } // fwrite #endif /********************************************************** Function: BYTE flushData (void) Summary: Flush unwritten data to a file Conditions: File opened in a write mode, data needs to be written Return Values: CE_GOOD - Data was updated successfully CE_WRITE_ERROR - Data could not be updated Side Effects: None Description: The flushData function is called when it is necessary to read new data into the global data buffer and the gNeedDataWrite variable indicates that there is data in the buffer that hasn't been written to the device. The flushData function will write the data from the buffer into the current cluster of the FSFILE object that is stored in the gBufferOwner global variable. Remarks: None **********************************************************/ #ifdef ALLOW_WRITES BYTE flushData (void) { DWORD l; DISK * dsk; // This will either be the pointer to the last file, or the handle FILEOBJ stream = gBufferOwner; dsk = stream->dsk; // figure out the lba l = Cluster2Sector(dsk,stream->ccls); l += (WORD)stream->sec; // add the sector number to it if(!MDD_SectorWrite( l, dsk->buffer, FALSE)) { return CE_WRITE_ERROR; } gNeedDataWrite = FALSE; return CE_GOOD; } #endif /**************************************************** Function: int FSfeof( FSFILE * stream ) Summary: Indicate whether the current file position is at the end Conditions: File is open in a read mode Input: stream - Pointer to the target file Return Values: Non-Zero - EOF reached 0 - Not at end of File Side Effects: The FSerrno variable will be changed. Description: The FSfeof function will indicate that the end-of- file has been reached for the specified file by comparing the absolute location in the file to the size of the file. Remarks: None. ****************************************************/ int FSfeof( FSFILE * stream ) { FSerrno = CE_GOOD; return( stream->seek == stream->size ); } /************************************************************************** Function: size_t FSfread(void *ptr, size_t size, size_t n, FSFILE *stream) Summary: Read data from a file Conditions: File is opened in a read mode Input: ptr - Destination buffer for read bytes size - Size of units in bytes n - Number of units to be read stream - File to be read from Return: size_t - number of units read Side Effects: The FSerrno variable will be changed. Description: The FSfread function will read data from the specified file. First, the appropriate sector of the file is loaded. Then, data is read into the specified buffer until the specified number of bytes have been read. When a cluster boundary is reached, a new cluster will be loaded. The parameters 'size' and 'n' indicate how much data to read. 'Size' refers to the size of one object to read (in bytes), and 'n' will refer to the number of these objects to read. The value returned will be equal to 'n' unless an error occured or the user tried to read beyond the end of the file. Remarks: None. **************************************************************************/ size_t FSfread (void *ptr, size_t size, size_t n, FSFILE *stream) { DWORD len = size * n; BYTE *pointer = (BYTE *) ptr; DISK *dsk; // Disk structure DWORD seek, sec_sel; WORD pos; //position within sector CETYPE error = CE_GOOD; WORD readCount = 0; FSerrno = CE_GOOD; dsk = (DISK *)stream->dsk; pos = stream->pos; seek = stream->seek; if( !stream->flags.read ) { FSerrno = CE_WRITEONLY; return 0; // CE_WRITEONLY } #ifdef ALLOW_WRITES if (gNeedDataWrite) if (flushData() != CE_GOOD) { FSerrno = CE_WRITE_ERROR; return 0; } #endif // if it not my buffer, then get it from the disk. if( (gBufferOwner != stream) && (pos != dsk->sectorSize)) { gBufferOwner = stream; sec_sel = Cluster2Sector(dsk,stream->ccls); sec_sel += (WORD)stream->sec; // add the sector number to it gBufferZeroed = FALSE; if( !MDD_SectorRead( sec_sel, dsk->buffer) ) { FSerrno = CE_BAD_SECTOR_READ; error = CE_BAD_SECTOR_READ; return 0; } gLastDataSectorRead = sec_sel; } //loop reading (count) bytes while( len ) { if( seek == stream->size ) { FSerrno = CE_EOF; error = CE_EOF; break; } // In fopen, pos is init to 0 and the sect is loaded if( pos == dsk->sectorSize ) { // reset position pos = 0; // point to the next sector stream->sec++; // get a new cluster if necessary if( stream->sec == dsk->SecPerClus ) { stream->sec = 0; if( (error = FILEget_next_cluster( stream, 1)) != CE_GOOD ) { FSerrno = CE_COULD_NOT_GET_CLUSTER; break; } } sec_sel = Cluster2Sector(dsk,stream->ccls); sec_sel += (WORD)stream->sec; // add the sector number to it gBufferOwner = stream; gBufferZeroed = FALSE; if( !MDD_SectorRead( sec_sel, dsk->buffer) ) { FSerrno = CE_BAD_SECTOR_READ; error = CE_BAD_SECTOR_READ; break; } gLastDataSectorRead = sec_sel; } // copy one byte at a time *pointer = RAMread( dsk->buffer, pos++ ); pointer++; seek++; readCount++; len--; } // save off the positon stream->pos = pos; // save off the seek stream->seek = seek; return(readCount / size); } // fread /*************************************************************************** Function: BYTE FormatFileName( const char* fileName, FILEOBJ fptr, BYTE mode ) Summary: Format a file name into dir entry format Conditions: This function should not be called by the user. Input: fileName - The name to be formatted fN2 - The location the formatted name will be stored mode - Non-zero if parital string search chars are allowed Return Values: TRUE - Name formatted successfully FALSE - File name could not be formatted Side Effects: None Description: Format an 8.3 filename into FSFILE structure format. If filename is less than 8 chars, then it will be padded with spaces. If the extension name is fewer than 3 chars, then it will also be oadded with spaces. The ValidateChars function is used to ensure the characters in the specified filename are valid in this filesystem. Remarks: None. ***************************************************************************/ BYTE FormatFileName( const char* fileName, FILEOBJ fptr, BYTE mode) { char *fN2; FILE_DIR_NAME_TYPE fileNameType; int temp,count1,count2,count3,count4; BOOL supportLFN = FALSE; char *localFileName = NULL; // go with static allocation #if defined(SUPPORT_LFN) unsigned short int tempString[256]; BOOL AscciIndication = TRUE; count1 = 256; #else unsigned short int tempString[13]; count1 = 12; #endif // Check whether the length of the file name is valid // for LFN support as well as Non LFN support #ifdef SUPPORT_LFN if(utfModeFileName) { utf16Filename = (unsigned short int *)fileName; fileNameLength = 0; while(utf16Filename[fileNameLength]) { fileNameLength++; } if((fileNameLength > count1) || (*utf16Filename == '.') || (*utf16Filename == 0)) { return FALSE; } for (count1 = 0;count1 < fileNameLength; count1++) { tempString[count1] = utf16Filename[count1]; } utf16Filename = tempString; } else #endif { fileNameLength = strlen(fileName); if((fileNameLength > count1) || (*fileName == '.') || (*fileName == 0)) { return FALSE; } asciiFilename = (char *)tempString; for (count1 = 0;count1 < fileNameLength; count1++) { asciiFilename[count1] = fileName[count1]; } } // Make sure the characters are valid fileNameType = ValidateChars(mode); // If the file name doesn't follow 8P3 or LFN format, then return FALSE if(NAME_ERROR == fileNameType) { return FALSE; } temp = fileNameLength; #if defined(SUPPORT_LFN) fptr->AsciiEncodingType = TRUE; fptr->utf16LFNlength = 0; #endif // If LFN is supported and the file name is UTF16 type or Ascii mixed type, // go for LFN support rather than trying to adjust in 8P3 format if(NAME_8P3_ASCII_MIXED_TYPE == fileNameType) { #if defined(SUPPORT_LFN) supportLFN = TRUE; #endif } #if defined(SUPPORT_LFN) if(NAME_8P3_UTF16_TYPE == fileNameType) { for (count3 = 0; count3 < temp; count3++) { if(utf16Filename[count3] > 0xFF) { fileNameType = NAME_8P3_UTF16_NONASCII_TYPE; supportLFN = TRUE; break; } } if(count3 == temp) { fileNameType = NAME_8P3_UTF16_ASCII_CAPS_TYPE; for (count3 = 0; count3 < temp; count3++) { if((utf16Filename[count3] >= 0x61) && (utf16Filename[count3] <= 0x7A)) { fileNameType = NAME_8P3_UTF16_ASCII_MIXED_TYPE; supportLFN = TRUE; break; } } } } #endif // If the file name follows 8P3 type if((NAME_LFN_TYPE != fileNameType) && (FALSE == supportLFN)) { for (count3 = 0; count3 < temp; count3++) { #ifdef SUPPORT_LFN if(utfModeFileName) { if(((utf16Filename[count3] == '.') && ((temp - count3) > 4)) || (count3 > 8)) { // UTF File name extension greater then 3 characters or // UTF File name greater then 8 charcters supportLFN = TRUE; break; } else if(utf16Filename[count3] == '.') { break; } } else #endif { if(((asciiFilename[count3] == '.') && ((temp - count3) > 4)) || (count3 > 8)) { // File extension greater then 3 characters or // File name greater then 8 charcters #if !defined(SUPPORT_LFN) return FALSE; #endif supportLFN = TRUE; break; } else if(asciiFilename[count3] == '.') { break; } } } // If LFN not supported try to adjust in 8P3 format if(FALSE == supportLFN) { // point fN2 to short file name fN2 = fptr -> name; // Load destination filename to be space intially. for (count1 = 0; count1 < FILE_NAME_SIZE_8P3; count1++) { *(fN2 + count1) = ' '; } // multiply the length by 2 as each UTF word has 2 byte #ifdef SUPPORT_LFN if(utfModeFileName) { count4 = count3 * 2; temp = temp * 2; localFileName = (char *)utf16Filename; } else #endif { count4 = count3; localFileName = asciiFilename; } //copy only file name ( not the extension part ) for (count1 = 0,count2 = 0; (count2 < 8) && (count1 < count4);count1++ ) { if(localFileName[count1]) { fN2[count2] = localFileName[count1]; // Destination filename initially filled with SPACE. Now copy only available chars. // Convert lower-case to upper-case if ((fN2[count2] >= 0x61) && (fN2[count2] <= 0x7A)) { fN2[count2] -= 0x20; } count2++; } } if(count4 < temp) { // Discard the '.' part count4++; // Copy the extn to 8th position onwards. Ex: "FILE .Tx " for (count3 = 8; (count3 < 11) && (count4 < temp);count4++ ) { if(localFileName[count4]) { fN2[count3] = localFileName[count4]; // Convert lower-case to upper-case if ((fN2[count3] >= 0x61) && (fN2[count3] <= 0x7A)) { fN2[count3] -= 0x20; } count3++; } } } } } // If the file name follows LFN format if((NAME_LFN_TYPE == fileNameType) || (TRUE == supportLFN)) { #if defined(SUPPORT_LFN) // point fN2 to long file name fN2 = (char *)(fptr -> utf16LFNptr); if(!utfModeFileName) { localFileName = asciiFilename; } // Copy the LFN name in the adress specified by FSFILE pointer count2 = 0; for(count1 = 0;count1 < temp;count1++) { if(utfModeFileName) { fptr -> utf16LFNptr[count1] = utf16Filename[count1]; if(AscciIndication) { if(utf16Filename[count1] > 0xFF) { fptr->AsciiEncodingType = FALSE; AscciIndication = FALSE; } } } else { fN2[count2++] = localFileName[count1]; fN2[count2++] = (BYTE)0x00; } } fptr -> utf16LFNptr[count1] = 0x0000; fptr->utf16LFNlength = fileNameLength + 1; #else return FALSE; #endif } // Free the temporary heap used for intermediate execution return TRUE; } #ifdef ALLOW_DIRS /************************************************************************* Function: BYTE FormatDirName (char * string,FILEOBJ fptr, BYTE mode) Summary: Format a dir name into dir entry format Conditions: This function should not be called by the user. Input: string - The name to be formatted mode - - TRUE - Partial string search characters are allowed - FALSE - Partial string search characters are forbidden Return Values: TRUE - The name was formatted correctly FALSE - The name contained invalid characters Side Effects: None Description: Format an 8.3 filename into directory structure format. If the name is less than 8 chars, then it will be padded with spaces. If the extension name is fewer than 3 chars, then it will also be oadded with spaces. The ValidateChars function is used to ensure the characters in the specified directory name are valid in this filesystem. Remarks: None. *************************************************************************/ BYTE FormatDirName (char * string,FILEOBJ fptr, BYTE mode) { char tempString [12]; FILE_DIR_NAME_TYPE fileNameType; int temp,count1,count2; BOOL supportLFN = FALSE; char *localFileName; // go with static allocation #if defined(SUPPORT_LFN) int count3,count4; BOOL AscciIndication = TRUE; count1 = 256; #else count1 = 12; #endif // Calculate the String length #ifdef SUPPORT_LFN if(utfModeFileName) { utf16Filename = (unsigned short int *)string; fileNameLength = 0; while(utf16Filename[fileNameLength]) { fileNameLength++; } } else #endif { asciiFilename = string; fileNameLength = strlen(string); } if(fileNameLength > count1) { return FALSE; } // Make sure the characters are valid fileNameType = ValidateChars(mode); // If the file name doesn't follow 8P3 or LFN format, then return FALSE if(NAME_ERROR == fileNameType) { return FALSE; } temp = fileNameLength; #if defined(SUPPORT_LFN) fptr->AsciiEncodingType = TRUE; fptr->utf16LFNlength = 0; #endif // If LFN is supported and the file name is UTF16 type or Ascii mixed type, // go for LFN support rather than trying to adjust in 8P3 format if(NAME_8P3_ASCII_MIXED_TYPE == fileNameType) { #if defined(SUPPORT_LFN) supportLFN = TRUE; #endif } #if defined(SUPPORT_LFN) if(NAME_8P3_UTF16_TYPE == fileNameType) { for (count3 = 0; count3 < temp; count3++) { if(utf16Filename[count3] > 0xFF) { fileNameType = NAME_8P3_UTF16_NONASCII_TYPE; supportLFN = TRUE; break; } } if(count3 == temp) { fileNameType = NAME_8P3_UTF16_ASCII_CAPS_TYPE; for (count3 = 0; count3 < temp; count3++) { if((utf16Filename[count3] >= 0x61) && (utf16Filename[count3] <= 0x7A)) { fileNameType = NAME_8P3_UTF16_ASCII_MIXED_TYPE; supportLFN = TRUE; break; } } } } #endif // If the file name follows LFN format if((NAME_LFN_TYPE == fileNameType) || (TRUE == supportLFN)) { #if !defined(SUPPORT_LFN) return FALSE; #else fptr -> utf16LFNptr = (unsigned short int *)string; if(utfModeFileName) { if(utf16Filename != (unsigned short int *)string) { // Copy the validated/Fomated name in the UTF16 string for(count1 = 0; count1 < temp; count1++) { fptr -> utf16LFNptr[count1] = utf16Filename[count1]; if(AscciIndication) { if(utf16Filename[count1] > 0xFF) { fptr->AsciiEncodingType = FALSE; AscciIndication = FALSE; } } } fptr -> utf16LFNptr[count1] = 0x0000; } else { for(count1 = 0; count1 < temp; count1++) { if(AscciIndication) { if(utf16Filename[count1] > 0xFF) { fptr->AsciiEncodingType = FALSE; AscciIndication = FALSE; break; } } } } } else { #ifdef FS_DYNAMIC_MEM unsigned short int *tempAsciiLFN = (unsigned short int *)FS_malloc((temp + 1) * 2); #else unsigned short int tempAsciiLFN[temp + 1]; #endif localFileName = (char *)tempAsciiLFN; // Copy the validated/Fomated name in the Ascii string count2 = 0; for(count1 = 0; count1 < temp; count1++) { localFileName[count2++] = asciiFilename[count1]; localFileName[count2++] = (BYTE)0x00; } // Copy the validated/Fomated name in the UTF16 string for(count1 = 0; count1 < temp; count1++) { fptr -> utf16LFNptr[count1] = tempAsciiLFN[count1]; } #ifdef FS_DYNAMIC_MEM FS_free((unsigned char *)tempAsciiLFN); #endif fptr -> utf16LFNptr[count1] = 0x0000; } fptr->utf16LFNlength = fileNameLength + 1; #endif } else { #ifdef SUPPORT_LFN if(utfModeFileName) { localFileName = (char *)utf16Filename; // Copy the name part in the temporary string count4 = 0; for (count3 = 0; (count3 < temp) && (utf16Filename[count3] != '.') && (utf16Filename[count3] != 0); count3++) { count1 = count3 * 2; if(localFileName[count1]) { tempString[count4] = localFileName[count1]; count4++; if(count4 == 8) break; } if(localFileName[count1 + 1]) { tempString[count4] = localFileName[count1 + 1]; count4++; if(count4 == 8) break; } } // File the remaining name portion with spaces while (count4 < 8) { tempString [count4++] = 0x20; } // Copy the extension part in the temporary string if (utf16Filename[count3] == '.') { count1 = count3 * 2 + 2; while (localFileName[count1] != 0) { if(localFileName[count3]) { tempString[count4] = localFileName[count3]; count4++; if(count4 == 11) break; } } } count1 = count4; } else #endif { // Copy the name part in the temporary string for (count1 = 0; (count1 < 8) && (*(asciiFilename + count1) != '.') && (*(asciiFilename + count1) != 0); count1++) { tempString[count1] = *(asciiFilename + count1); } count2 = count1; // File the remaining name portion with spaces while (count1 < 8) { tempString [count1++] = 0x20; } // Copy the extension part in the temporary string if (*(asciiFilename + count2) == '.') { count2++; while (*(asciiFilename + count2) != 0) { tempString[count1++] = *(asciiFilename + count2++); } } } // File the remaining portion with spaces while (count1 < FILE_NAME_SIZE_8P3) { tempString[count1++] = 0x20; } tempString[FILE_NAME_SIZE_8P3] = 0; // Forbidden if (tempString[0] == 0x20) { tempString[0] = '_'; } // point fN2 to short file name localFileName = fptr -> name; // Copy the formated name in string for (count1 = 0; count1 < TOTAL_FILE_SIZE_8P3; count1++) { localFileName[count1] = tempString[count1]; // Convert lower-case to upper-case if ((localFileName[count1] >= 0x61) && (localFileName[count1] <= 0x7A)) { localFileName[count1] -= 0x20; } } } return TRUE; } #endif /************************************************************* Function: FILE_DIR_NAME_TYPE ValidateChars(BYTE mode) Summary: Validate the characters in a given file name Conditions: This function should not be called by the user. Input: fileName - The name to be validated mode - Determines if partial string search is allowed Return Values: TRUE - Name was validated FALSE - File name was not valid Side Effects: None Description: The ValidateChars function will compare characters in a specified filename to determine if they're permissable in the FAT file system. Lower-case characters will be converted to upper-case. If the mode argument is specifed to be 'TRUE,' partial string search characters are allowed. Remarks: None. *************************************************************/ FILE_DIR_NAME_TYPE ValidateChars(BYTE mode) { FILE_DIR_NAME_TYPE fileNameType; unsigned short int count1; #if defined(SUPPORT_LFN) unsigned short int utf16Value; unsigned short int count2; int count3; #endif unsigned char radix = FALSE,asciiValue; #if defined(SUPPORT_LFN) // Remove the spaces if they are present before the file name for (count1 = 0; count1 < fileNameLength; count1++) { if(utfModeFileName) { if((utf16Filename[count1] != ' ') && (utf16Filename[count1] != '.')) { utf16Filename = utf16Filename + count1; break; } } else if((asciiFilename[count1] != ' ') && (asciiFilename[count1] != '.')) { asciiFilename = asciiFilename + count1; break; } } count2 = 0; // Remove the spaces & dots if they are present after the file name for (count3 = fileNameLength - count1 - 1; count3 > 0; count3--) { if(utfModeFileName) { if((utf16Filename[count3] != ' ') && (utf16Filename[count3] != '.')) { break; } } else if((asciiFilename[count3] != ' ') && (asciiFilename[count3] != '.')) { break; } count2++; } fileNameLength = fileNameLength - count1 - count2; if(( fileNameLength > MAX_FILE_NAME_LENGTH_LFN ) || (fileNameLength == 0))// 255 return NAME_ERROR; //long file name #endif // If the string length is greater then 8P3 length, then assume // the file name as LFN type provided there are no errors in the // below for loop. #ifdef SUPPORT_LFN if(utfModeFileName) { if((fileNameLength * 2) > (TOTAL_FILE_SIZE_8P3 * 2)) { fileNameType = NAME_LFN_TYPE; } else { fileNameType = NAME_8P3_UTF16_TYPE; } } else #endif { if(fileNameLength > TOTAL_FILE_SIZE_8P3) { fileNameType = NAME_LFN_TYPE; } else { fileNameType = NAME_8P3_ASCII_CAPS_TYPE; } } for( count1 = 0; count1 < fileNameLength; count1++ ) { #ifdef SUPPORT_LFN if(utfModeFileName) { utf16Value = utf16Filename[count1]; // Characters not valid for either of 8P3 & LFN format if (((utf16Value < 0x20) && (utf16Value != 0x05)) || (utf16Value == 0x22) || (utf16Value == 0x2F) || (utf16Value == 0x3A) || (utf16Value == 0x3C) || (utf16Value == 0x3E) || (utf16Value == 0x5C) || (utf16Value == 0x7C)) { return NAME_ERROR; } // Check for partial string search chars if (mode == FALSE) { if ((utf16Value == '*') || (utf16Value == '?')) { return NAME_ERROR; } } if(fileNameType != NAME_LFN_TYPE) { // Characters valid for LFN format only if ((utf16Value == 0x20) || (utf16Value == 0x2B) || (utf16Value == 0x2C) || (utf16Value == 0x3B) || (utf16Value == 0x3D) || (utf16Value == 0x5B) || (utf16Value == 0x5D) || ((utf16Value == 0x2E) && (radix == TRUE))) { fileNameType = NAME_LFN_TYPE; continue; } // only one radix ('.') character is allowed in 8P3 format, where as // multiple radices can be present in LFN format if (utf16Filename[count1] == 0x2E) { radix = TRUE; } } } else #endif { asciiValue = asciiFilename[count1]; if(((asciiValue < 0x20) && (asciiValue != 0x05)) || (asciiValue == 0x22) || (asciiValue == 0x2F) || (asciiValue == 0x3A) || (asciiValue == 0x3C) || (asciiValue == 0x3E) || (asciiValue == 0x5C) || (asciiValue == 0x7C)) { return NAME_ERROR; } // Check for partial string search chars if (mode == FALSE) { if ((asciiValue == '*') || (asciiValue == '?')) { return NAME_ERROR; } } if(fileNameType != NAME_LFN_TYPE) { // Characters valid for LFN format only if ((asciiValue == 0x20) || (asciiValue == 0x2B) || (asciiValue == 0x2C) || (asciiValue == 0x3B) || (asciiValue == 0x3D) || (asciiValue == 0x5B) || (asciiValue == 0x5D) || ((asciiValue == 0x2E) && (radix == TRUE))) { fileNameType = NAME_LFN_TYPE; continue; } // only one radix ('.') character is allowed in 8P3 format, where as // multiple radices can be present in LFN format if (asciiValue == 0x2E) { radix = TRUE; } // If the characters are mixed type & are within 8P3 length range // then store file type as 8P3 mixed type format if(fileNameType != NAME_8P3_ASCII_MIXED_TYPE) { if((asciiValue >= 0x61) && (asciiValue <= 0x7A)) { fileNameType = NAME_8P3_ASCII_MIXED_TYPE; } } } } } return fileNameType; } /********************************************************************** Function: int FSfseek(FSFILE *stream, long offset, int whence) Summary: Change the current position in a file Conditions: File opened Input: stream - Pointer to file structure offset - Offset from base location whence - - SEEK_SET - Seek from start of file - SEEK_CUR - Seek from current location - SEEK_END - Seek from end of file (subtract offset) Return Values: 0 - Operation successful -1 - Operation unsuccesful Side Effects: The FSerrno variable will be changed. Description: The FSfseek function will change the current position in the file to one specified by the user. First, an absolute offset is calculated using the offset and base location passed in by the user. Then, the position variables are updated, and the sector number that corresponds to the new location. That sector is then loaded. If the offset falls exactly on a cluster boundary, a new cluster will be allocated to the file and the position will be set to the first byte of that cluster. Remarks: None **********************************************************************/ int FSfseek(FSFILE *stream, long offset, int whence) { DWORD numsector, temp; // lba of first sector of first cluster DISK* dsk; // pointer to disk structure BYTE test; long offset2 = offset; dsk = stream->dsk; switch(whence) { case SEEK_CUR: // Apply the offset to the current position offset2 += stream->seek; break; case SEEK_END: // Apply the offset to the end of the file offset2 = stream->size - offset2; break; case SEEK_SET: // automatically there default: break; } #ifdef ALLOW_WRITES if (gNeedDataWrite) if (flushData()) { FSerrno = CE_WRITE_ERROR; return EOF; } #endif // start from the beginning temp = stream->cluster; stream->ccls = temp; temp = stream->size; if (offset2 > temp) { FSerrno = CE_INVALID_ARGUMENT; return (-1); // past the limits } else { // if we are writing we are no longer at the end stream->flags.FileWriteEOF = FALSE; // set the new postion stream->seek = offset2; // figure out how many sectors numsector = offset2 / dsk->sectorSize; // figure out how many bytes off of the offset offset2 = offset2 - (numsector * dsk->sectorSize); stream->pos = offset2; // figure out how many clusters temp = numsector / dsk->SecPerClus; // figure out the stranded sectors numsector = numsector - (dsk->SecPerClus * temp); stream->sec = numsector; // if we are in the current cluster stay there if (temp > 0) { test = FILEget_next_cluster(stream, temp); if (test != CE_GOOD) { if (test == CE_FAT_EOF) { #ifdef ALLOW_WRITES if (stream->flags.write) { // load the previous cluster stream->ccls = stream->cluster; // Don't perform this operation if there's only one cluster if (temp != 1) test = FILEget_next_cluster(stream, temp - 1); if (FILEallocate_new_cluster(stream, 0) != CE_GOOD) { FSerrno = CE_COULD_NOT_GET_CLUSTER; return -1; } // sec and pos should already be zero } else { #endif stream->ccls = stream->cluster; test = FILEget_next_cluster(stream, temp - 1); if (test != CE_GOOD) { FSerrno = CE_COULD_NOT_GET_CLUSTER; return (-1); } stream->pos = dsk->sectorSize; stream->sec = dsk->SecPerClus - 1; #ifdef ALLOW_WRITES } #endif } else { FSerrno = CE_COULD_NOT_GET_CLUSTER; return (-1); // past the limits } } } // Determine the lba of the selected sector and load temp = Cluster2Sector(dsk,stream->ccls); // now the extra sectors numsector = stream->sec; temp += numsector; gBufferOwner = NULL; gBufferZeroed = FALSE; if( !MDD_SectorRead(temp, dsk->buffer) ) { FSerrno = CE_BADCACHEREAD; return (-1); // Bad read } gLastDataSectorRead = temp; } FSerrno = CE_GOOD; return (0); } // FSfopenpgm, FSremovepgm, and FSrenamepgm will only work on PIC18s #ifdef __18CXX #ifdef ALLOW_PGMFUNCTIONS #ifdef ALLOW_WRITES /***************************************************************** Function: int FSrenamepgm(const rom char * fileName, FSFILE * fo) Summary: Rename a file named with a ROM string on PIC18 Conditions: File opened. Input: fileName - The new name of the file (in ROM) fo - The file to rename Return Values: 0 - File renamed successfully -1 - File could not be renamed Side Effects: The FSerrno variable will be changed. Description: The Fsrenamepgm function will copy the rom fileName specified by the user into a RAM array and pass that array into the FSrename function. Remarks: This function is for use with PIC18 when passing arguments in ROM. *****************************************************************/ int FSrenamepgm (const rom char * fileName, FSFILE * fo) { #if defined(SUPPORT_LFN) char tempArray[257]; unsigned short int count; #else char tempArray[13]; BYTE count; #endif *fileName; for(count = 0; count < sizeof(tempArray); count++) { _asm TBLRDPOSTINC _endasm tempArray[count] = TABLAT; }//end for(...) return FSrename (tempArray, fo); } #endif /****************************************************************************** Function: FSFILE * FSfopenpgm(const rom char * fileName, const rom char *mode) Summary: Open a Ascii file named with a ROM string on PIC18 Conditions: For read modes, file exists; FSInit performed Input: fileName - The name of the file to be opened (ROM) mode - The mode the file will be opened in (ROM) Return Values: FSFILE * - A pointer to the file object NULL - File could not be opened Side Effects: The FSerrno variable will be changed. Description: The FSfopenpgm function will copy a PIC18 ROM fileName and mode argument into RAM arrays, and then pass those arrays to the FSfopen function. Remarks: This function is for use with PIC18 when passing arguments in ROM. ******************************************************************************/ FSFILE * FSfopenpgm(const rom char * fileName, const rom char *mode) { #if defined(SUPPORT_LFN) char tempArray[257]; unsigned short int count = 0; #else char tempArray[13]; BYTE count = 0; #endif char M[2]; for(;;) { tempArray[count] = fileName[count]; if(tempArray[count]) count++; else break; } for (count = 0; count < 2; count++) { M[count] = *(mode + count); } return FSfopen(tempArray, M); } /************************************************************* Function: int FSremovepgm (const rom char * fileName) Summary: Delete a file named with a ROM string on PIC18 Conditions: File not opened; file exists Input: fileName - The name of the file to be deleted (ROM) Return Values: 0 - File was removed successfully -1 - File could not be removed Side Effects: The FSerrno variable will be changed. Description: The FSremovepgm function will copy a PIC18 ROM fileName argument into a RAM array, and then pass that array to the FSremove function. Remarks: This function is for use with PIC18 when passing arguments in ROM. *************************************************************/ #ifdef ALLOW_WRITES int FSremovepgm (const rom char * fileName) { #ifdef SUPPORT_LFN char tempArray[257]; unsigned short int count; #else char tempArray[13]; BYTE count; #endif *fileName; for(count = 0; count < sizeof(tempArray); count++) { _asm TBLRDPOSTINC _endasm tempArray[count] = TABLAT; }//end for(...) return FSremove (tempArray); } #endif /************************************************************************************** Function: int FindFirstpgm (const char * fileName, unsigned int attr, SearchRec * rec) Summary: Find a file named with a ROM string on PIC18 Conditions: None Input: fileName - The name of the file to be found (ROM) attr - The attributes of the file to be found rec - Pointer to a search record to store the file info in Return Values: 0 - File was found -1 - No file matching the given parameters was found Side Effects: Search criteria from previous FindFirst call on passed SearchRec object will be lost. The FSerrno variable will be changed. Description: The FindFirstpgm function will copy a PIC18 ROM fileName argument into a RAM array, and then pass that array to the FindFirst function. Remarks: Call FindFirstpgm or FindFirst before calling FindNext. This function is for use with PIC18 when passing arguments in ROM. **************************************************************************************/ #ifdef ALLOW_FILESEARCH int FindFirstpgm (const rom char * fileName, unsigned int attr, SearchRec * rec) { #if defined(SUPPORT_LFN) char tempArray[257]; unsigned short int count; #else char tempArray[13]; BYTE count; #endif *fileName; for(count = 0; count < sizeof(tempArray); count++) { _asm TBLRDPOSTINC _endasm tempArray[count] = TABLAT; }//end for return FindFirst (tempArray,attr,rec); } #endif #endif #endif /*********************************************** Function: DWORD ReadFAT (DISK *dsk, DWORD ccls) Summary: Read the next entry from the FAT Conditions: This function should not be called by the user. Input: dsk - The disk structure ccls - The current cluster Return: DWORD - The next cluster in a file chain Side Effects: None Description: The ReadFAT function will read the FAT and determine the next cluster value after the cluster specified by 'ccls.' Note that the FAT sector that is read is stored in the global FAT cache buffer. Remarks: None. ***********************************************/ DWORD ReadFAT (DISK *dsk, DWORD ccls) { BYTE q; DWORD p, l; // "l" is the sector Address DWORD c = 0, d, ClusterFailValue,LastClusterLimit; // ClusterEntries gBufferZeroed = FALSE; /* Settings based on FAT type */ switch (dsk->type) { #ifdef SUPPORT_FAT32 // If FAT32 supported. case FAT32: p = (DWORD)ccls * 4; q = 0; // "q" not used for FAT32, only initialized to remove a warning ClusterFailValue = CLUSTER_FAIL_FAT32; LastClusterLimit = LAST_CLUSTER_FAT32; break; #endif case FAT12: p = (DWORD) ccls *3; // Mulby1.5 to find cluster pos in FAT q = p&1; p >>= 1; ClusterFailValue = CLUSTER_FAIL_FAT16; LastClusterLimit = LAST_CLUSTER_FAT12; break; case FAT16: default: p = (DWORD)ccls *2; // Mulby 2 to find cluster pos in FAT q = 0; // "q" not used for FAT16, only initialized to remove a warning ClusterFailValue = CLUSTER_FAIL_FAT16; LastClusterLimit = LAST_CLUSTER_FAT16; break; } l = dsk->fat + (p / dsk->sectorSize); // p &= dsk->sectorSize - 1; // Restrict 'p' within the FATbuffer size // Check if the appropriate FAT sector is already loaded if (gLastFATSectorRead == l) { #ifdef SUPPORT_FAT32 // If FAT32 supported. if (dsk->type == FAT32) c = RAMreadD (gFATBuffer, p); else #endif if(dsk->type == FAT16) c = RAMreadW (gFATBuffer, p); else if(dsk->type == FAT12) { c = RAMread (gFATBuffer, p); if (q) { c >>= 4; } // Check if the MSB is across the sector boundry p = (p +1) & (dsk->sectorSize-1); if (p == 0) { // Start by writing the sector we just worked on to the card // if we need to #ifdef ALLOW_WRITES if (gNeedFATWrite) if(WriteFAT (dsk, 0, 0, TRUE)) return ClusterFailValue; #endif if (!MDD_SectorRead (l+1, gFATBuffer)) { gLastFATSectorRead = 0xFFFF; return ClusterFailValue; } else { gLastFATSectorRead = l +1; } } d = RAMread (gFATBuffer, p); if (q) { c += (d <<4); } else { c += ((d & 0x0F)<<8); } } } else { // If there's a currently open FAT sector, // write it back before reading into the buffer #ifdef ALLOW_WRITES if (gNeedFATWrite) { if(WriteFAT (dsk, 0, 0, TRUE)) return ClusterFailValue; } #endif if (!MDD_SectorRead (l, gFATBuffer)) { gLastFATSectorRead = 0xFFFF; // Note: It is Sector not Cluster. return ClusterFailValue; } else { gLastFATSectorRead = l; #ifdef SUPPORT_FAT32 // If FAT32 supported. if (dsk->type == FAT32) c = RAMreadD (gFATBuffer, p); else #endif if(dsk->type == FAT16) c = RAMreadW (gFATBuffer, p); else if (dsk->type == FAT12) { c = RAMread (gFATBuffer, p); if (q) { c >>= 4; } p = (p +1) & (dsk->sectorSize-1); d = RAMread (gFATBuffer, p); if (q) { c += (d <<4); } else { c += ((d & 0x0F)<<8); } } } } // Normalize it so 0xFFFF is an error if (c >= LastClusterLimit) c = LastClusterLimit; return c; } // ReadFAT /**************************************************************************** Function: WORD WriteFAT (DISK *dsk, DWORD ccls, WORD value, BYTE forceWrite) Summary: Write an entry to the FAT Conditions: This function should not be called by the user. Input: dsk - The disk structure ccls - The current cluster value - The value to write in forceWrite - Force the function to write the current FAT sector Return: 0 - The FAT write was successful FAIL - The FAT could not be written Side Effects: None Description: The WriteFAT function writes an entry to the FAT. If the function is called and the 'forceWrite' argument is TRUE, the function will write the existing FAT data to the device. Otherwise, the function will replace a single entry in the FAT buffer (indicated by 'ccls') with a new value (indicated by 'value.') Remarks: None. ****************************************************************************/ #ifdef ALLOW_WRITES DWORD WriteFAT (DISK *dsk, DWORD ccls, DWORD value, BYTE forceWrite) { BYTE i, q, c; DWORD p, li, l, ClusterFailValue; #ifdef SUPPORT_FAT32 // If FAT32 supported. if ((dsk->type != FAT32) && (dsk->type != FAT16) && (dsk->type != FAT12)) return CLUSTER_FAIL_FAT32; #else // If FAT32 support not enabled if ((dsk->type != FAT16) && (dsk->type != FAT12)) return CLUSTER_FAIL_FAT16; #endif /* Settings based on FAT type */ switch (dsk->type) { #ifdef SUPPORT_FAT32 // If FAT32 supported. case FAT32: ClusterFailValue = CLUSTER_FAIL_FAT32; break; #endif case FAT12: case FAT16: default: ClusterFailValue = CLUSTER_FAIL_FAT16; break; } gBufferZeroed = FALSE; // The only purpose for calling this function with forceWrite // is to write the current FAT sector to the card if (forceWrite) { for (i = 0, li = gLastFATSectorRead; i < dsk->fatcopy; i++, li += dsk->fatsize) { if (!MDD_SectorWrite (li, gFATBuffer, FALSE)) { return ClusterFailValue; } } gNeedFATWrite = FALSE; return 0; } /* Settings based on FAT type */ switch (dsk->type) { #ifdef SUPPORT_FAT32 // If FAT32 supported. case FAT32: p = (DWORD)ccls *4; // "p" is the position in "gFATBuffer" for corresponding cluster. q = 0; // "q" not used for FAT32, only initialized to remove a warning break; #endif case FAT12: p = (DWORD) ccls * 3; // "p" is the position in "gFATBuffer" for corresponding cluster. q = p & 1; // Odd or even? p >>= 1; break; case FAT16: default: p = (DWORD) ccls *2; // "p" is the position in "gFATBuffer" for corresponding cluster. q = 0; // "q" not used for FAT16, only initialized to remove a warning break; } l = dsk->fat + (p / dsk->sectorSize); // p &= dsk->sectorSize - 1; // Restrict 'p' within the FATbuffer size if (gLastFATSectorRead != l) { // If we are loading a new sector then write // the current one to the card if we need to if (gNeedFATWrite) { for (i = 0, li = gLastFATSectorRead; i < dsk->fatcopy; i++, li += dsk->fatsize) { if (!MDD_SectorWrite (li, gFATBuffer, FALSE)) { return ClusterFailValue; } } gNeedFATWrite = FALSE; } // Load the new sector if (!MDD_SectorRead (l, gFATBuffer)) { gLastFATSectorRead = 0xFFFF; return ClusterFailValue; } else { gLastFATSectorRead = l; } } #ifdef SUPPORT_FAT32 // If FAT32 supported. if (dsk->type == FAT32) // Refer page 16 of FAT requirement. { RAMwrite (gFATBuffer, p, ((value & 0x000000ff))); // lsb,1st byte of cluster value RAMwrite (gFATBuffer, p+1, ((value & 0x0000ff00) >> 8)); RAMwrite (gFATBuffer, p+2, ((value & 0x00ff0000) >> 16)); RAMwrite (gFATBuffer, p+3, ((value & 0x0f000000) >> 24)); // the MSB nibble is supposed to be "0" in FAT32. So mask it. } else #endif { if (dsk->type == FAT16) { RAMwrite (gFATBuffer, p, value); //lsB RAMwrite (gFATBuffer, p+1, ((value&0x0000ff00) >> 8)); // msB } else if (dsk->type == FAT12) { // Get the current byte from the FAT c = RAMread (gFATBuffer, p); if (q) { c = ((value & 0x0F) << 4) | ( c & 0x0F); } else { c = (value & 0xFF); } // Write in those bits RAMwrite (gFATBuffer, p, c); // FAT12 entries can cross sector boundaries // Check if we need to load a new sector p = (p +1) & (dsk->sectorSize-1); if (p == 0) { // call this function to update the FAT on the card if (WriteFAT (dsk, 0,0,TRUE)) return ClusterFailValue; // Load the next sector if (!MDD_SectorRead (l +1, gFATBuffer)) { gLastFATSectorRead = 0xFFFF; return ClusterFailValue; } else { gLastFATSectorRead = l + 1; } } // Get the second byte of the table entry c = RAMread (gFATBuffer, p); if (q) { c = (value >> 4); } else { c = ((value >> 8) & 0x0F) | (c & 0xF0); } RAMwrite (gFATBuffer, p, c); } } gNeedFATWrite = TRUE; return 0; } #endif #ifdef ALLOW_DIRS // This string is used by dir functions to hold dir names temporarily #if defined(SUPPORT_LFN) char tempDirectoryString [522]; #else char tempDirectoryString [14]; #endif /************************************************************************** Function: int FSchdir (char * path) Summary: Change the current working directory as per the path specified in Ascii format Conditions: None Input: path - The path of the directory to change to. Return Values: 0 - The current working directory was changed successfully EOF - The current working directory could not be changed Side Effects: The current working directory may be changed. The FSerrno variable will be changed. Description: The FSchdir function passes a RAM pointer to the path to the chdirhelper function. Remarks: None **************************************************************************/ int FSchdir (char * path) { return chdirhelper (0, path, NULL); } /************************************************************************** Function: int wFSchdir (unsigned short int * path) Summary: Change the current working directory as per the path specified in UTF16 format Conditions: None Input: path - The path of the directory to change to. Return Values: 0 - The current working directory was changed successfully EOF - The current working directory could not be changed Side Effects: The current working directory may be changed. The FSerrno variable will be changed. Description: The wFSchdir function passes a RAM pointer to the path to the chdirhelper function. Remarks: None **************************************************************************/ #ifdef SUPPORT_LFN int wFSchdir (unsigned short int * path) { int result; utfModeFileName = TRUE; result = chdirhelper (0, (char *)path, NULL); utfModeFileName = FALSE; return result; } #endif /************************************************************************** Function: int FSchdirpgm (const rom char * path) Summary: Changed the CWD with a path in ROM on PIC18 Conditions: None Input: path - The path of the directory to change to (ROM) Return Values: 0 - The current working directory was changed successfully EOF - The current working directory could not be changed Side Effects: The current working directory may be changed. The FSerrno variable will be changed. Description: The FSchdirpgm function passes a PIC18 ROM path pointer to the chdirhelper function. Remarks: This function is for use with PIC18 when passing arguments in ROM **************************************************************************/ #ifdef ALLOW_PGMFUNCTIONS int FSchdirpgm (const rom char * path) { return chdirhelper (1, NULL, path); } /************************************************************************** Function: int wFSchdirpgm (const rom unsigned short int * path) Summary: Changed the CWD with a path in ROM on PIC18 Conditions: None Input: path - The path of the directory to change to (ROM) Return Values: 0 - The current working directory was changed successfully EOF - The current working directory could not be changed Side Effects: The current working directory may be changed. The FSerrno variable will be changed. Description: The FSchdirpgm function passes a PIC18 ROM path pointer to the chdirhelper function. Remarks: This function is for use with PIC18 when passing arguments in ROM **************************************************************************/ #ifdef SUPPORT_LFN int wFSchdirpgm (const rom unsigned short int * path) { int result; utfModeFileName = TRUE; result = chdirhelper (1, NULL, (const char *)path); utfModeFileName = FALSE; return result; } #endif #endif /************************************************************************* Function: // PIC24/30/33/32 int chdirhelper (BYTE mode, char * ramptr, char * romptr); // PIC18 int chdirhelper (BYTE mode, char * ramptr, const rom char * romptr); Summary: Helper function for FSchdir Conditions: None Input: mode - Indicates which path pointer to use ramptr - Pointer to the path specified in RAM romptr - Pointer to the path specified in ROM Return Values: 0 - Directory was changed successfully. EOF - Directory could not be changed. Side Effects: The current working directory will be changed. The FSerrno variable will be changed. Any unwritten data in the data buffer will be written to the device. Description: This helper function is used by the FSchdir function. If the path argument is specified in ROM for PIC18 this function will be able to parse it correctly. The function will loop through a switch statement to process the tokens in the path string. Dot or dotdot entries are handled in the first case statement. A backslash character is handled in the second case statement (note that this case statement will only be used if backslash is the first character in the path; backslash token delimiters will automatically be skipped after each token in the path is processed). The third case statement will handle actual directory name strings. Remarks: None. *************************************************************************/ #ifdef ALLOW_PGMFUNCTIONS int chdirhelper (BYTE mode, char * ramptr, const rom char * romptr) #else int chdirhelper (BYTE mode, char * ramptr, char * romptr) #endif { unsigned short int i,j,k = 0; WORD curent = 1; DIRENTRY entry; char * temppath = ramptr; #ifdef ALLOW_PGMFUNCTIONS rom char * temppath2 = romptr; rom unsigned short int * utf16path2 = (rom unsigned short int *)romptr; #endif #ifdef SUPPORT_LFN unsigned short int *utf16path = (unsigned short int *)ramptr; #endif FSFILE tempCWDobj2; FILEOBJ tempCWD = &tempCWDobj2; FileObjectCopy (tempCWD, cwdptr); FSerrno = CE_GOOD; // Check the first char of the path #ifdef ALLOW_PGMFUNCTIONS if (mode) { #ifdef SUPPORT_LFN if(utfModeFileName) { i = *utf16path2; } else #endif { i = *temppath2; } } else #endif { #ifdef SUPPORT_LFN if(utfModeFileName) { i = *utf16path; } else #endif { i = *temppath; } } // if NULL character return error if (i == 0) { FSerrno = CE_INVALID_ARGUMENT; return -1; } while(1) { switch (i) { // First case: dot or dotdot entry case '.': // Move past the dot #ifdef ALLOW_PGMFUNCTIONS if (mode) { #ifdef SUPPORT_LFN if(utfModeFileName) { utf16path2++; i = *utf16path2; } else #endif { temppath2++; i = *temppath2; } } else { #endif #ifdef SUPPORT_LFN if(utfModeFileName) { utf16path++; i = *utf16path; } else #endif { temppath++; i = *temppath; } #ifdef ALLOW_PGMFUNCTIONS } #endif // Check if it's a dotdot entry if (i == '.') { // Increment the path variable #ifdef ALLOW_PGMFUNCTIONS if (mode) { #ifdef SUPPORT_LFN if(utfModeFileName) { utf16path2++; i = *utf16path2; } else #endif { temppath2++; i = *temppath2; } } else { #endif #ifdef SUPPORT_LFN if(utfModeFileName) { utf16path++; i = *utf16path; } else #endif { temppath++; i = *temppath; } #ifdef ALLOW_PGMFUNCTIONS } #endif // Check if we're in the root if (tempCWD->dirclus == FatRootDirClusterValue) { // Fails if there's a dotdot chdir from the root FSerrno = CE_INVALID_ARGUMENT; return -1; } else { // Cache the dotdot entry tempCWD->dirccls = tempCWD->dirclus; curent = 1; entry = Cache_File_Entry (tempCWD, &curent, TRUE); if (entry == NULL) { FSerrno = CE_BADCACHEREAD; return -1; } // Get the cluster tempCWD->dirclus = GetFullClusterNumber(entry); // Get Complete Cluster number. tempCWD->dirccls = tempCWD->dirclus; // If we changed to root, record the name if (tempCWD->dirclus == VALUE_DOTDOT_CLUSTER_VALUE_FOR_ROOT) // "0" is the value of Dotdot entry for Root in both FAT types. { j = 0; tempCWD->name[j++] = '\\'; // if(utfModeFileName) // { // tempCWD->name[j++] = 0x00; // } for (;j < 11;) { tempCWD->name[j] = 0x20; ++j; } /* While moving to Root, get the Root cluster value */ tempCWD->dirccls = FatRootDirClusterValue; tempCWD->dirclus = FatRootDirClusterValue; } else { // Otherwise set the name to .. j = 0; tempCWD->name[j++] = '.'; // if(utfModeFileName) // { // tempCWD->name[j++] = 0x00; // tempCWD->name[j++] = '.'; // tempCWD->name[j++] = 0x00; // } // else { tempCWD->name[j++] = '.'; } for (; j < 11;) { tempCWD->name[j] = 0x20; ++j; } } // Cache the dot entry curent = 0; if (Cache_File_Entry(tempCWD, &curent, TRUE) == NULL) { FSerrno = CE_BADCACHEREAD; return -1; } // Move past the next backslash, if necessary while (i == '\\') { #ifdef ALLOW_PGMFUNCTIONS if (mode) { #ifdef SUPPORT_LFN if(utfModeFileName) { utf16path2++; i = *utf16path2; } else #endif { temppath2++; i = *temppath2; } } else { #endif #ifdef SUPPORT_LFN if(utfModeFileName) { utf16path++; i = *utf16path; } else #endif { temppath++; i = *temppath; } #ifdef ALLOW_PGMFUNCTIONS } #endif } // Copy and return, if we're at the end if (i == 0) { FileObjectCopy (cwdptr, tempCWD); return 0; } } } else { // If we ended with a . entry, // just return what we have if (i == 0) { FileObjectCopy (cwdptr, tempCWD); return 0; } else { if (i == '\\') { while (i == '\\') { #ifdef ALLOW_PGMFUNCTIONS if (mode) { #ifdef SUPPORT_LFN if(utfModeFileName) { utf16path2++; i = *utf16path2; } else #endif { temppath2++; i = *temppath2; } } else { #endif #ifdef SUPPORT_LFN if(utfModeFileName) { utf16path++; i = *utf16path; } else #endif { temppath++; i = *temppath; } #ifdef ALLOW_PGMFUNCTIONS } #endif } if (i == 0) { FileObjectCopy (cwdptr, tempCWD); return 0; } } else { // Anything else after a dot doesn't make sense FSerrno = CE_INVALID_ARGUMENT; return -1; } } } break; // Second case: the first char is the root backslash // We will ONLY switch to this case if the first char // of the path is a backslash case '\\': // Increment pointer to second char #ifdef ALLOW_PGMFUNCTIONS if (mode) { #ifdef SUPPORT_LFN if(utfModeFileName) { utf16path2++; i = *utf16path2; } else #endif { temppath2++; i = *temppath2; } } else { #endif #ifdef SUPPORT_LFN if(utfModeFileName) { utf16path++; i = *utf16path; } else #endif { temppath++; i = *temppath; } #ifdef ALLOW_PGMFUNCTIONS } #endif // Can't start the path with multiple backslashes if (i == '\\') { FSerrno = CE_INVALID_ARGUMENT; return -1; } if (i == 0) { // The user is changing directory to // the root cwdptr->dirclus = FatRootDirClusterValue; cwdptr->dirccls = FatRootDirClusterValue; j = 0; cwdptr->name[j++] = '\\'; // if(utfModeFileName) // { // cwdptr->name[j++] = 0x00; // } for (; j < 11;) { cwdptr->name[j] = 0x20; ++j; } return 0; } else { // Our first char is the root dir switch tempCWD->dirclus = FatRootDirClusterValue; tempCWD->dirccls = FatRootDirClusterValue; j = 0; tempCWD->name[j++] = '\\'; // if(utfModeFileName) // { // tempCWD->name[j++] = 0x00; // } for (; j < 11;) { tempCWD->name[j] = 0x20; ++j; } } break; default: // We should be at the beginning of a string of letters/numbers j = 0; #ifdef ALLOW_PGMFUNCTIONS if (mode) { #ifdef SUPPORT_LFN if(utfModeFileName) { // Change directories as specified k = 512; // Parse the next token while ((i != 0) && (i != '\\') && (j < k)) { tempDirectoryString[j++] = i; tempDirectoryString[j++] = i >> 8; i = *(++utf16path2); } tempDirectoryString[j++] = 0; } else #endif { #if defined(SUPPORT_LFN) k = 256; #else k = 12; #endif // Parse the next token while ((i != 0) && (i != '\\') && (j < k)) { tempDirectoryString[j++] = i; i = *(++temppath2); } } } else { #endif #ifdef SUPPORT_LFN if(utfModeFileName) { // Change directories as specified k = 512; // Parse the next token while ((i != 0) && (i != '\\') && (j < k)) { tempDirectoryString[j++] = i; tempDirectoryString[j++] = i >> 8; i = *(++utf16path); } tempDirectoryString[j++] = 0; } else #endif { #if defined(SUPPORT_LFN) k = 256; #else k = 12; #endif // Parse the next token while ((i != 0) && (i != '\\') && (j < k)) { tempDirectoryString[j++] = i; i = *(++temppath); } } #ifdef ALLOW_PGMFUNCTIONS } #endif tempDirectoryString[j++] = 0; // We got a whole 12 chars // There could be more- truncate it if (j > k) { while ((i != 0) && (i != '\\')) { #ifdef ALLOW_PGMFUNCTIONS if (mode) { #ifdef SUPPORT_LFN if(utfModeFileName) { i = *(++utf16path2); } else #endif { i = *(++temppath2); } } else { #endif #ifdef SUPPORT_LFN if(utfModeFileName) { i = *(++utf16path); } else #endif { i = *(++temppath); } #ifdef ALLOW_PGMFUNCTIONS } #endif } } if (FormatDirName (tempDirectoryString, tempCWD,0) == FALSE) return -1; // copy file object over FileObjectCopy(&gFileTemp, tempCWD); // See if the directory is there if(FILEfind (&gFileTemp, tempCWD, LOOK_FOR_MATCHING_ENTRY, 0) != CE_GOOD) { // Couldn't find the DIR FSerrno = CE_DIR_NOT_FOUND; return -1; } else { // Found the file // Check to make sure it's actually a directory if ((gFileTemp.attributes & ATTR_DIRECTORY) == 0 ) { FSerrno = CE_INVALID_ARGUMENT; return -1; } // Get the new name #if defined(SUPPORT_LFN) if(!tempCWD->utf16LFNlength) #endif for (j = 0; j < 11; j++) { tempCWD->name[j] = gFileTemp.name[j]; } tempCWD->dirclus = gFileTemp.cluster; tempCWD->dirccls = tempCWD->dirclus; } if (i == 0) { // If we're at the end of the string, we're done FileObjectCopy (cwdptr, tempCWD); return 0; } else { while (i == '\\') { // If we get to another backslash, increment past it #ifdef ALLOW_PGMFUNCTIONS if (mode) { #ifdef SUPPORT_LFN if(utfModeFileName) { utf16path2++; i = *utf16path2; } else #endif { temppath2++; i = *temppath2; } } else { #endif #ifdef SUPPORT_LFN if(utfModeFileName) { utf16path++; i = *utf16path; } else #endif { temppath++; i = *temppath; } #ifdef ALLOW_PGMFUNCTIONS } #endif if (i == 0) { FileObjectCopy (cwdptr, tempCWD); return 0; } } } break; } } // loop } // This string is used by FSgetcwd to return the cwd name if the path // passed into the function is NULL char defaultArray [10]; /************************************************************** Function: char * FSgetcwd (char * path, int numchars) Summary: Get the current working directory path in Ascii format Conditions: None Input: path - Pointer to the array to return the cwd name in numchars - Number of chars in the path Return Values: char * - The cwd name string pointer (path or defaultArray) NULL - The current working directory name could not be loaded. Side Effects: The FSerrno variable will be changed Description: The FSgetcwd function will get the name of the current working directory and return it to the user. The name will be copied into the buffer pointed to by 'path,' starting at the root directory and copying as many chars as possible before the end of the buffer. The buffer size is indicated by the 'numchars' argument. The first thing this function will do is load the name of the current working directory, if it isn't already present. This could occur if the user switched to the dotdot entry of a subdirectory immediately before calling this function. The function will then copy the current working directory name into the buffer backwards, and insert a backslash character. Next, the function will continuously switch to the previous directories and copy their names backwards into the buffer until it reaches the root. If the buffer overflows, it will be treated as a circular buffer, and data will be copied over existing characters, starting at the beginning. Once the root directory is reached, the text in the buffer will be swapped, so that the buffer contains as much of the current working directory name as possible, starting at the root. Remarks: None **************************************************************/ char * FSgetcwd (char * path, int numchars) { // If path is passed in as null, set up a default // array with 10 characters unsigned short int totalchars = (path == NULL) ? 10 : numchars; char * returnPointer; char * bufferEnd; FILEOBJ tempCWD = &gFileTemp; BYTE bufferOverflow = FALSE; signed char j; DWORD curclus; WORD fHandle, tempindex; short int i = 0, index = 0; char aChar; DIRENTRY entry; #if defined(SUPPORT_LFN) WORD prevHandle; UINT16_VAL tempShift; FSFILE cwdTemp; LFN_ENTRY *lfno; unsigned short int *tempLFN = (unsigned short int *)&tempDirectoryString[0]; #endif FSerrno = CE_GOOD; // Set up the return value if (path == NULL) returnPointer = defaultArray; else { returnPointer = path; if (numchars == 0) { FSerrno = CE_INVALID_ARGUMENT; return NULL; } } bufferEnd = returnPointer + totalchars - 1; FileObjectCopy (tempCWD, cwdptr); if (((tempCWD->name[0] == '.') && (tempCWD->name[1] == '.')) #if defined(SUPPORT_LFN) || tempCWD->utf16LFNlength #endif ) { // We last changed directory into a dotdot entry // Save the value of the current directory curclus = tempCWD->dirclus; // Put this dir's dotdot entry into the dirclus // Our cwd absolutely is not the root fHandle = 1; tempCWD->dirccls = tempCWD->dirclus; entry = Cache_File_Entry (tempCWD,&fHandle, TRUE); if (entry == NULL) { FSerrno = CE_BADCACHEREAD; return NULL; } // Get the cluster TempClusterCalc = GetFullClusterNumber(entry); // Get complete cluster number. // For FAT32, if the .. entry is 0, the cluster won't be 0 #ifdef SUPPORT_FAT32 if (TempClusterCalc == VALUE_DOTDOT_CLUSTER_VALUE_FOR_ROOT) { tempCWD->dirclus = FatRootDirClusterValue; } else #endif tempCWD->dirclus = TempClusterCalc; tempCWD->dirccls = tempCWD->dirclus; // Find the direntry for the entry we were just in fHandle = 0; entry = Cache_File_Entry (tempCWD, &fHandle, TRUE); if (entry == NULL) { FSerrno = CE_BADCACHEREAD; return NULL; } // Get the cluster TempClusterCalc = GetFullClusterNumber(entry); // Get complete cluster number. while ((TempClusterCalc != curclus) || ((TempClusterCalc == curclus) && (((unsigned char)entry->DIR_Name[0] == 0xE5) || (entry->DIR_Attr == ATTR_VOLUME) || (entry->DIR_Attr == ATTR_LONG_NAME)))) { fHandle++; entry = Cache_File_Entry (tempCWD, &fHandle, FALSE); if (entry == NULL) { FSerrno = CE_BADCACHEREAD; return NULL; } // Get the cluster TempClusterCalc = GetFullClusterNumber(entry); // Get complete cluster number in a loop. } #if defined(SUPPORT_LFN) FileObjectCopy (&cwdTemp, tempCWD); prevHandle = fHandle - 1; lfno = (LFN_ENTRY *)Cache_File_Entry (tempCWD, &prevHandle, FALSE); while((lfno->LFN_Attribute == ATTR_LONG_NAME) && (lfno->LFN_SequenceNo != DIR_DEL) && (lfno->LFN_SequenceNo != DIR_EMPTY)) { tempShift.byte.LB = lfno->LFN_Part1[0]; tempShift.byte.HB = lfno->LFN_Part1[1]; tempLFN[i++] = tempShift.Val; tempShift.byte.LB = lfno->LFN_Part1[2]; tempShift.byte.HB = lfno->LFN_Part1[3]; tempLFN[i++] = tempShift.Val; tempShift.byte.LB = lfno->LFN_Part1[4]; tempShift.byte.HB = lfno->LFN_Part1[5]; tempLFN[i++] = tempShift.Val; tempShift.byte.LB = lfno->LFN_Part1[6]; tempShift.byte.HB = lfno->LFN_Part1[7]; tempLFN[i++] = tempShift.Val; tempShift.byte.LB = lfno->LFN_Part1[8]; tempShift.byte.HB = lfno->LFN_Part1[9]; tempLFN[i++] = tempShift.Val; tempLFN[i++] = lfno->LFN_Part2[0]; tempLFN[i++] = lfno->LFN_Part2[1]; tempLFN[i++] = lfno->LFN_Part2[2]; tempLFN[i++] = lfno->LFN_Part2[3]; tempLFN[i++] = lfno->LFN_Part2[4]; tempLFN[i++] = lfno->LFN_Part2[5]; tempLFN[i++] = lfno->LFN_Part3[0]; tempLFN[i++] = lfno->LFN_Part3[1]; prevHandle = prevHandle - 1; lfno = (LFN_ENTRY *)Cache_File_Entry (tempCWD, &prevHandle, FALSE); } FileObjectCopy (tempCWD, &cwdTemp); #endif if(i == 0) { for (j = 0; j < 11; j++) { tempCWD->name[j] = entry->DIR_Name[j]; cwdptr->name[j] = entry->DIR_Name[j]; } #if defined(SUPPORT_LFN) cwdptr->utf16LFNlength = 0; tempCWD->utf16LFNlength = 0; #endif } #if defined(SUPPORT_LFN) else { tempCWD->utf16LFNlength = i; for(j = 12;j >= 0;j--) { if((tempLFN[i - j - 1]) == 0x0000) { tempCWD->utf16LFNlength = i - j; break; } } cwdptr->utf16LFNlength = tempCWD->utf16LFNlength; tempCWD->utf16LFNptr = (unsigned short int *)&tempDirectoryString[0]; cwdptr->utf16LFNptr = (unsigned short int *)&tempDirectoryString[0]; } #endif // Reset our temp dir back to that cluster tempCWD->dirclus = curclus; tempCWD->dirccls = curclus; // This will set us at the cwd, but it will actually // have the name in the name field this time } // There's actually some kind of name value in the cwd #if defined(SUPPORT_LFN) if (((tempCWD->name[0] == '\\') && (tempCWD->utf16LFNlength == 0x0000)) || ((tempCWD->utf16LFNlength != 0x0000) && (tempCWD->utf16LFNptr[0] == (unsigned short int)'\\')) || (numchars == 0x02)) #else if ((tempCWD->name[0] == '\\') || (numchars == 0x02)) #endif { // Easy, our CWD is the root *returnPointer = '\\'; *(returnPointer + 1) = 0; return returnPointer; } else { index = 0; // Loop until we get back to the root while (tempCWD->dirclus != FatRootDirClusterValue) { #if defined(SUPPORT_LFN) if(tempCWD->utf16LFNlength) { i = tempCWD->utf16LFNlength * 2 - 3; while(i >= 0) { #ifdef SUPPORT_LFN if(twoByteMode) { returnPointer[index++] = tempDirectoryString[i--]; if (index == totalchars) { index = 0; bufferOverflow = TRUE; } } else #endif { if(tempDirectoryString[i]) { returnPointer[index++] = tempDirectoryString[i]; if (index == totalchars) { index = 0; bufferOverflow = TRUE; } } i--; } } } else #endif { j = 10; while (tempCWD->name[j] == 0x20) j--; if (j >= 8) { while (j >= 8) { *(returnPointer + index++) = tempCWD->name[j--]; // This is a circular buffer // Any unnecessary values will be overwritten if (index == totalchars) { index = 0; bufferOverflow = TRUE; } #ifdef SUPPORT_LFN if(twoByteMode) { returnPointer[index++] = 0x00; if (index == totalchars) { index = 0; bufferOverflow = TRUE; } } #endif } *(returnPointer + index++) = '.'; if (index == totalchars) { index = 0; bufferOverflow = TRUE; } #ifdef SUPPORT_LFN if(twoByteMode) { returnPointer[index++] = 0x00; if (index == totalchars) { index = 0; bufferOverflow = TRUE; } } #endif } while (tempCWD->name[j] == 0x20) j--; while (j >= 0) { *(returnPointer + index++) = tempCWD->name[j--]; // This is a circular buffer // Any unnecessary values will be overwritten if (index == totalchars) { index = 0; bufferOverflow = TRUE; } #ifdef SUPPORT_LFN if(twoByteMode) { returnPointer[index++] = 0x00; if (index == totalchars) { index = 0; bufferOverflow = TRUE; } } #endif } } #ifdef SUPPORT_LFN if(twoByteMode) { returnPointer[index++] = 0x00; if (index == totalchars) { index = 0; bufferOverflow = TRUE; } } #endif // Put a backslash delimiter in front of the dir name *(returnPointer + index++) = '\\'; if (index == totalchars) { index = 0; bufferOverflow = TRUE; } // Load the previous entry tempCWD->dirccls = tempCWD->dirclus; if (GetPreviousEntry (tempCWD)) { FSerrno = CE_BAD_SECTOR_READ; return NULL; } } } // Point the index back at the last char in the string index--; i = 0; // Swap the chars in the buffer so they are in the right places if (bufferOverflow) { tempindex = index; // Swap the overflowed values in the buffer while ((index - i) > 0) { aChar = *(returnPointer + i); *(returnPointer + i) = * (returnPointer + index); *(returnPointer + index) = aChar; index--; i++; } // Point at the non-overflowed values i = tempindex + 1; index = bufferEnd - returnPointer; // Swap the non-overflowed values into the right places while ((index - i) > 0) { aChar = *(returnPointer + i); *(returnPointer + i) = * (returnPointer + index); *(returnPointer + index) = aChar; index--; i++; } // All the values should be in the right place now // Null-terminate the string *(bufferEnd) = 0; } else { // There was no overflow, just do one set of swaps tempindex = index; while ((index - i) > 0) { aChar = *(returnPointer + i); *(returnPointer + i) = * (returnPointer + index); *(returnPointer + index) = aChar; index--; i++; } *(returnPointer + tempindex + 1) = 0; } return returnPointer; } #ifdef SUPPORT_LFN /************************************************************** Function: char * wFSgetcwd (unsigned short int * path, int numchars) Summary: Get the current working directory path in UTF16 format Conditions: None Input: path - Pointer to the array to return the cwd name in numchars - Number of chars in the path Return Values: char * - The cwd name string pointer (path or defaultArray) NULL - The current working directory name could not be loaded. Side Effects: The FSerrno variable will be changed Description: The FSgetcwd function will get the name of the current working directory and return it to the user. The name will be copied into the buffer pointed to by 'path,' starting at the root directory and copying as many chars as possible before the end of the buffer. The buffer size is indicated by the 'numchars' argument. The first thing this function will do is load the name of the current working directory, if it isn't already present. This could occur if the user switched to the dotdot entry of a subdirectory immediately before calling this function. The function will then copy the current working directory name into the buffer backwards, and insert a backslash character. Next, the function will continuously switch to the previous directories and copy their names backwards into the buffer until it reaches the root. If the buffer overflows, it will be treated as a circular buffer, and data will be copied over existing characters, starting at the beginning. Once the root directory is reached, the text in the buffer will be swapped, so that the buffer contains as much of the current working directory name as possible, starting at the root. Remarks: None **************************************************************/ char * wFSgetcwd (unsigned short int * path, int numchars) { char *result; twoByteMode = TRUE; result = FSgetcwd ((char *)path,numchars); twoByteMode = FALSE; return result; } #endif /************************************************************************** Function: void GetPreviousEntry (FSFILE * fo) Summary: Get the file entry info for the parent dir of the specified dir Conditions: Should not be called by the user. Input: fo - The file to get the previous entry of Return Values: 0 - The previous entry was successfully retrieved -1 - The previous entry could not be retrieved Side Effects: None Description: The GetPreviousEntry function is used by the FSgetcwd function to load the previous (parent) directory. This function will load the parent directory and then search through the file entries in that directory for one that matches the cluster number of the original directory. When the matching entry is found, the name of the original directory is copied into the 'fo' FSFILE object. Remarks: None. **************************************************************************/ BYTE GetPreviousEntry (FSFILE * fo) { int i,j; WORD fHandle = 1; DWORD dirclus; DIRENTRY dirptr; #ifdef SUPPORT_LFN unsigned short int *tempLFN = (unsigned short int *)&tempDirectoryString[0]; FSFILE cwdTemp; LFN_ENTRY *lfno; WORD prevHandle; UINT16_VAL tempShift; #endif // Load the previous entry dirptr = Cache_File_Entry (fo, &fHandle, TRUE); if (dirptr == NULL) return -1; // Get the cluster TempClusterCalc = GetFullClusterNumber(dirptr); // Get complete cluster number. if (TempClusterCalc == VALUE_DOTDOT_CLUSTER_VALUE_FOR_ROOT) { // The previous directory is the root fo->name[0] = '\\'; for (i = 0; i < 11; i++) { fo->name[i] = 0x20; } fo->dirclus = FatRootDirClusterValue; fo->dirccls = FatRootDirClusterValue; } else { // Get the directory name // Save the previous cluster value // Get the cluster dirclus = TempClusterCalc; fo->dirclus = TempClusterCalc; fo->dirccls = TempClusterCalc; // Load the previous previous cluster dirptr = Cache_File_Entry (fo, &fHandle, TRUE); if (dirptr == NULL) return -1; // Get the cluster TempClusterCalc = GetFullClusterNumber(dirptr); // Get complete cluster number. #ifdef SUPPORT_FAT32 // If we're using FAT32 and the previous previous cluster is the root, the // value in the dotdot entry will be 0, but the actual cluster won't if (TempClusterCalc == VALUE_DOTDOT_CLUSTER_VALUE_FOR_ROOT) { fo->dirclus = FatRootDirClusterValue; } else #endif fo->dirclus = TempClusterCalc; fo->dirccls = fo->dirclus; fHandle = 0; dirptr = Cache_File_Entry (fo, &fHandle, TRUE); if (dirptr == NULL) return -1; // Look through it until we get the name // of the previous cluster // Get the cluster TempClusterCalc = GetFullClusterNumber(dirptr); // Get complete cluster number. while ((TempClusterCalc != dirclus) || ((TempClusterCalc == dirclus) && (((unsigned char)dirptr->DIR_Name[0] == 0xE5) || (dirptr->DIR_Attr == ATTR_VOLUME) || (dirptr->DIR_Attr == ATTR_LONG_NAME)))) { // Look through the entries until we get the // right one dirptr = Cache_File_Entry (fo, &fHandle, FALSE); if (dirptr == NULL) return -1; fHandle++; TempClusterCalc = GetFullClusterNumber(dirptr); // Get complete cluster number in a loop. } // The name should be in the entry now // Copy the actual directory location back fo->dirclus = dirclus; fo->dirccls = dirclus; } i = 0; #ifdef SUPPORT_LFN FileObjectCopy (&cwdTemp, fo); prevHandle = fHandle - 2; lfno = (LFN_ENTRY *)Cache_File_Entry (fo, &prevHandle, FALSE); // Get the long file name of the short file name(if present) while((lfno->LFN_Attribute == ATTR_LONG_NAME) && (lfno->LFN_SequenceNo != DIR_DEL) && (lfno->LFN_SequenceNo != DIR_EMPTY)) { tempShift.byte.LB = lfno->LFN_Part1[0]; tempShift.byte.HB = lfno->LFN_Part1[1]; tempLFN[i++] = tempShift.Val; tempShift.byte.LB = lfno->LFN_Part1[2]; tempShift.byte.HB = lfno->LFN_Part1[3]; tempLFN[i++] = tempShift.Val; tempShift.byte.LB = lfno->LFN_Part1[4]; tempShift.byte.HB = lfno->LFN_Part1[5]; tempLFN[i++] = tempShift.Val; tempShift.byte.LB = lfno->LFN_Part1[6]; tempShift.byte.HB = lfno->LFN_Part1[7]; tempLFN[i++] = tempShift.Val; tempShift.byte.LB = lfno->LFN_Part1[8]; tempShift.byte.HB = lfno->LFN_Part1[9]; tempLFN[i++] = tempShift.Val; tempLFN[i++] = lfno->LFN_Part2[0]; tempLFN[i++] = lfno->LFN_Part2[1]; tempLFN[i++] = lfno->LFN_Part2[2]; tempLFN[i++] = lfno->LFN_Part2[3]; tempLFN[i++] = lfno->LFN_Part2[4]; tempLFN[i++] = lfno->LFN_Part2[5]; tempLFN[i++] = lfno->LFN_Part3[0]; tempLFN[i++] = lfno->LFN_Part3[1]; prevHandle = prevHandle - 1; lfno = (LFN_ENTRY *)Cache_File_Entry (fo, &prevHandle, FALSE); } FileObjectCopy (fo, &cwdTemp); #endif if(i == 0) { for (j = 0; j < 11; j++) fo->name[j] = dirptr->DIR_Name[j]; #ifdef SUPPORT_LFN fo->utf16LFNlength = 0; #endif } #ifdef SUPPORT_LFN else { fo->utf16LFNlength = i; for(j = 12;j >= 0;j--) { if((tempLFN[i - j - 1]) == 0x0000) { fo->utf16LFNlength = i - j; break; } } fo->utf16LFNptr = (unsigned short int *)&tempDirectoryString[0]; } #endif return 0; } /************************************************************************** Function: int FSmkdir (char * path) Summary: Create a directory as per the Ascii input path Conditions: None Input: path - The path of directories to create. Return Values: 0 - The specified directory was created successfully EOF - The specified directory could not be created Side Effects: Will create all non-existent directories in the path. The FSerrno variable will be changed. Description: The FSmkdir function passes a RAM pointer to the path to the mkdirhelper function. Remarks: None **************************************************************************/ #ifdef ALLOW_WRITES int FSmkdir (char * path) { return mkdirhelper (0, path, NULL); } /************************************************************************** Function: int wFSmkdir (unsigned short int * path) Summary: Create a directory as per the UTF16 input path Conditions: None Input: path - The path of directories to create. Return Values: 0 - The specified directory was created successfully EOF - The specified directory could not be created Side Effects: Will create all non-existent directories in the path. The FSerrno variable will be changed. Description: The wFSmkdir function passes a RAM pointer to the path to the mkdirhelper function. Remarks: None **************************************************************************/ #ifdef SUPPORT_LFN int wFSmkdir (unsigned short int * path) { int result; utfModeFileName = TRUE; result = mkdirhelper (0, (char *)path, NULL); utfModeFileName = FALSE; return result; } #endif /************************************************************************** Function: int FSmkdirpgm (const rom char * path) Summary: Create a directory with a path in ROM on PIC18 Conditions: None Input: path - The path of directories to create (ROM) Return Values: 0 - The specified directory was created successfully EOF - The specified directory could not be created Side Effects: Will create all non-existent directories in the path. The FSerrno variable will be changed. Description: The FSmkdirpgm function passes a PIC18 ROM path pointer to the mkdirhelper function. Remarks: This function is for use with PIC18 when passing arugments in ROM **************************************************************************/ #ifdef ALLOW_PGMFUNCTIONS int FSmkdirpgm (const rom char * path) { return mkdirhelper (1, NULL, path); } /************************************************************************** Function: int wFSmkdirpgm (const rom unsigned short int * path) Summary: Create a directory with a path in ROM on PIC18 Conditions: None Input: path - The path of directories to create (ROM) Return Values: 0 - The specified directory was created successfully EOF - The specified directory could not be created Side Effects: Will create all non-existent directories in the path. The FSerrno variable will be changed. Description: The FSmkdirpgm function passes a PIC18 ROM path pointer to the mkdirhelper function. Remarks: This function is for use with PIC18 when passing arugments in ROM **************************************************************************/ #ifdef SUPPORT_LFN int wFSmkdirpgm (const rom unsigned short int * path) { int result; utfModeFileName = TRUE; result = mkdirhelper (1, NULL, (const char *)path); utfModeFileName = FALSE; return result; } #endif #endif /************************************************************************* Function: // PIC24/30/33/32 int mkdirhelper (BYTE mode, char * ramptr, char * romptr) // PIC18 int mkdirhelper (BYTE mode, char * ramptr, const rom char * romptr) Summary: Helper function for FSmkdir Conditions: None Input: mode - Indicates which path pointer to use ramptr - Pointer to the path specified in RAM romptr - Pointer to the path specified in ROM Return Values: 0 - Directory was created -1 - Directory could not be created Side Effects: Will create all non-existant directories in the path. The FSerrno variable will be changed. Description: This helper function is used by the FSchdir function. If the path argument is specified in ROM for PIC18 this function will be able to parse it correctly. This function will first scan through the path to ensure that any DIR names don't exceed 11 characters. It will then backup the current working directory and begin changing directories through the path until it reaches a directory than can't be changed to. It will then create the specified directory and change directories to the new directory. The function will continue creating and changing to directories until the end of the path is reached. The function will then restore the original current working directory. Remarks: None **************************************************************************/ #ifdef ALLOW_PGMFUNCTIONS int mkdirhelper (BYTE mode, char * ramptr, const rom char * romptr) #else int mkdirhelper (BYTE mode, char * ramptr, char * romptr) #endif { unsigned short int i,j = 0,k = 0; char * temppath = ramptr; #ifdef ALLOW_PGMFUNCTIONS rom char * temppath2 = romptr; rom unsigned short int * utf16path2 = (rom unsigned short int *)romptr; #endif unsigned short int *utf16path = (unsigned short int *)ramptr; FILEOBJ tempCWD = &tempCWDobj; #ifdef __18CXX char dotdotPath[] = ".."; char dotdotPath1[5] = {'.','\0','.','\0','\0'}; #endif // Do Dynamic allocation if the macro is defined or // go with static allocation #if defined(SUPPORT_LFN) char tempArray[514]; #else char tempArray[14]; #endif FSerrno = CE_GOOD; if (MDD_WriteProtectState()) { FSerrno = CE_WRITE_PROTECTED; return (-1); } #ifdef ALLOW_PGMFUNCTIONS if (mode == 1) { #ifdef SUPPORT_LFN if(utfModeFileName) { // Scan for too-long file names while (1) { i = 0; while((*utf16path2 != 0) && (*utf16path2 != '.')&& (*utf16path2 != '\\')) { utf16path2++; i++; } if (i > 256) { FSerrno = CE_INVALID_ARGUMENT; return -1; } j = 0; if (*utf16path2 == '.') { utf16path2++; while ((*utf16path2 != 0) && (*utf16path2 != '\\')) { utf16path2++; j++; } if ((i + j) > 256) { FSerrno = CE_INVALID_ARGUMENT; return -1; } } if((i + j) > k) { k = (i + j); } while (*utf16path2 == '\\') utf16path2++; if (*utf16path2 == 0) break; } } else #endif { // Scan for too-long file names while (1) { i = 0; while((*temppath2 != 0) && (*temppath2 != '.')&& (*temppath2 != '\\')) { temppath2++; i++; } #if defined(SUPPORT_LFN) if (i > 256) { FSerrno = CE_INVALID_ARGUMENT; return -1; } #else if (i > 8) { FSerrno = CE_INVALID_ARGUMENT; return -1; } #endif j = 0; if (*temppath2 == '.') { temppath2++; while ((*temppath2 != 0) && (*temppath2 != '\\')) { temppath2++; j++; } #if defined(SUPPORT_LFN) if ((i + j) > 256) { FSerrno = CE_INVALID_ARGUMENT; return -1; } #else if (j > 3) { FSerrno = CE_INVALID_ARGUMENT; return -1; } #endif } if((i + j) > k) { k = (i + j); } while (*temppath2 == '\\') temppath2++; if (*temppath2 == 0) break; } } } else #endif { #ifdef SUPPORT_LFN if(utfModeFileName) { utf16path = (unsigned short int *)ramptr; // Scan for too-long file names while (1) { i = 0; while((*utf16path != 0) && (*utf16path != '.')&& (*utf16path != '\\')) { utf16path++; i++; } if (i > 256) { FSerrno = CE_INVALID_ARGUMENT; return -1; } j = 0; if (*utf16path == '.') { utf16path++; while ((*utf16path != 0) && (*utf16path != '\\')) { utf16path++; j++; } if ((i + j) > 256) { FSerrno = CE_INVALID_ARGUMENT; return -1; } } if((i + j) > k) { k = (i + j); } while (*utf16path == '\\') utf16path++; if (*utf16path == 0) break; } } else #endif { // Scan for too-long file names while (1) { i = 0; while((*temppath != 0) && (*temppath != '.')&& (*temppath != '\\')) { temppath++; i++; } #if defined(SUPPORT_LFN) if (i > 256) { FSerrno = CE_INVALID_ARGUMENT; return -1; } #else if (i > 8) { FSerrno = CE_INVALID_ARGUMENT; return -1; } #endif j = 0; if (*temppath == '.') { temppath++; while ((*temppath != 0) && (*temppath != '\\')) { temppath++; j++; } #if defined(SUPPORT_LFN) if ((i + j) > 256) { FSerrno = CE_INVALID_ARGUMENT; return -1; } #else if (j > 3) { FSerrno = CE_INVALID_ARGUMENT; return -1; } #endif } if((i + j) > k) { k = (i + j); } while (*temppath == '\\') temppath++; if (*temppath == 0) break; } } } utf16path = (unsigned short int *)ramptr; temppath = ramptr; #ifdef ALLOW_PGMFUNCTIONS utf16path2 = (rom unsigned short int *)romptr; temppath2 = romptr; #endif // We're going to be moving the CWD // Back up the CWD FileObjectCopy (tempCWD, cwdptr); // get to the target directory while (1) { #ifdef ALLOW_PGMFUNCTIONS if (mode == 1) { #ifdef SUPPORT_LFN if(utfModeFileName) i = *utf16path2; else #endif i = *temppath2; } else #endif { #ifdef SUPPORT_LFN if(utfModeFileName) i = *utf16path; else #endif i = *temppath; } if (i == '.') { #ifdef ALLOW_PGMFUNCTIONS if (mode == 1) { #ifdef SUPPORT_LFN if(utfModeFileName) { utf16path2++; i = *utf16path2; } else #endif { temppath2++; i = *temppath2; } } else { #endif #ifdef SUPPORT_LFN if(utfModeFileName) { utf16path++; i = *utf16path; } else #endif { temppath++; i = *temppath; } #ifdef ALLOW_PGMFUNCTIONS } #endif if ((i != '.') && (i != 0) && (i != '\\')) { FSerrno = CE_INVALID_ARGUMENT; return -1; } if (i == '.') { if (cwdptr->dirclus == FatRootDirClusterValue) { // If we try to change to the .. from the // root, operation fails FSerrno = CE_INVALID_ARGUMENT; return -1; } #ifdef ALLOW_PGMFUNCTIONS if (mode == 1) { #ifdef SUPPORT_LFN if(utfModeFileName) { utf16path2++; i = *utf16path2; } else #endif { temppath2++; i = *temppath2; } } else #endif { #ifdef SUPPORT_LFN if(utfModeFileName) { utf16path++; i = *utf16path; } else #endif { temppath++; i = *temppath; } } if ((i != '\\') && (i != 0)) { FSerrno = CE_INVALID_ARGUMENT; return -1; } // dotdot entry #ifndef __18CXX #ifdef SUPPORT_LFN if(utfModeFileName) FSchdir (".\0.\0\0"); #endif else FSchdir (".."); #else #ifdef SUPPORT_LFN if(utfModeFileName) FSchdir (dotdotPath1); else #endif FSchdir (dotdotPath); #endif } // Skip past any backslashes while (i == '\\') { #ifdef ALLOW_PGMFUNCTIONS if (mode == 1) { #ifdef SUPPORT_LFN if(utfModeFileName) { utf16path2++; i = *utf16path2; } else #endif { temppath2++; i = *temppath2; } } else { #endif #ifdef SUPPORT_LFN if(utfModeFileName) { utf16path++; i = *utf16path; } else #endif { temppath++; i = *temppath; } #ifdef ALLOW_PGMFUNCTIONS } #endif } if (i == 0) { // No point in creating a dot or dotdot entry directly FileObjectCopy (cwdptr, tempCWD); FSerrno = CE_INVALID_ARGUMENT; return -1; } } else { if (i == '\\') { // Start at the root cwdptr->dirclus = FatRootDirClusterValue; cwdptr->dirccls = FatRootDirClusterValue; i = 0; cwdptr->name[i++] = '\\'; // if(utfModeFileName) // { // cwdptr->name[i++] = 0x00; // } for (; i < 11; i++) { cwdptr->name[i] = 0x20; } #ifdef ALLOW_PGMFUNCTIONS if (mode == 1) { #ifdef SUPPORT_LFN if(utfModeFileName) { utf16path2++; i = *utf16path2; } else #endif { temppath2++; i = *temppath2; } } else { #endif #ifdef SUPPORT_LFN if(utfModeFileName) { utf16path++; i = *utf16path; } else #endif { temppath++; i = *temppath; } #ifdef ALLOW_PGMFUNCTIONS } #endif // If we just got two backslashes in a row at the // beginning of the path, the function fails if ((i == '\\') || (i == 0)) { FileObjectCopy (cwdptr, tempCWD); FSerrno = CE_INVALID_ARGUMENT; return -1; } } else { break; } } } while (1) { while(1) { #ifdef ALLOW_PGMFUNCTIONS if (mode == 1) { #ifdef SUPPORT_LFN if(utfModeFileName) { // Change directories as specified i = *utf16path2; j = 0; k = 512; // Parse the next token while ((i != 0) && (i != '\\') && (j < k)) { tempArray[j++] = i; tempArray[j++] = i >> 8; utf16path2++; i = *utf16path2; } } else #endif { // Change directories as specified i = *temppath2; j = 0; #if defined(SUPPORT_LFN) k = 256; #else k = 12; #endif // Parse the next token while ((i != 0) && (i != '\\') && (j < k)) { tempArray[j++] = i; temppath2++; i = *temppath2; } } } else { #endif #ifdef SUPPORT_LFN if(utfModeFileName) { // Change directories as specified i = *utf16path; j = 0; k = 512; // Parse the next token while ((i != 0) && (i != '\\') && (j < k)) { tempArray[j++] = i; tempArray[j++] = i >> 8; utf16path++; i = *utf16path; } } else #endif { // Change directories as specified i = *temppath; j = 0; #if defined(SUPPORT_LFN) k = 256; #else k = 12; #endif // Parse the next token while ((i != 0) && (i != '\\') && (j < k)) { tempArray[j++] = i; temppath++; i = *temppath; } } #ifdef ALLOW_PGMFUNCTIONS } #endif #ifdef SUPPORT_LFN if(utfModeFileName) { tempArray[j++] = 0; tempArray[j] = 0; if ((tempArray[0] == '.') && (tempArray[1] == 0)) { if (((tempArray[2] != 0) || (tempArray[3] != 0)) && ((tempArray[2] != '.') || (tempArray[3] != 0))) { FileObjectCopy (cwdptr, tempCWD); FSerrno = CE_INVALID_ARGUMENT; return -1; } if (((tempArray[2] == '.') && (tempArray[3] == 0)) && ((tempArray[4] != 0) || (tempArray[5] != 0))) { FileObjectCopy (cwdptr, tempCWD); FSerrno = CE_INVALID_ARGUMENT; return -1; } } } else #endif { tempArray[j] = 0; if (tempArray[0] == '.') { if ((tempArray[1] != 0) && (tempArray[1] != '.')) { FileObjectCopy (cwdptr, tempCWD); FSerrno = CE_INVALID_ARGUMENT; return -1; } if ((tempArray[1] == '.') && (tempArray[2] != 0)) { FileObjectCopy (cwdptr, tempCWD); FSerrno = CE_INVALID_ARGUMENT; return -1; } } } // Try to change to it // If you can't we need to create it if (FSchdir (tempArray)) break; else { // We changed into the directory while (i == '\\') { // Next char is a backslash // Move past it #ifdef ALLOW_PGMFUNCTIONS if (mode == 1) { #ifdef SUPPORT_LFN if(utfModeFileName) { utf16path2++; i = *utf16path2; } else #endif { temppath2++; i = *temppath2; } } else { #endif #ifdef SUPPORT_LFN if(utfModeFileName) { utf16path++; i = *utf16path; } else #endif { temppath++; i = *temppath; } #ifdef ALLOW_PGMFUNCTIONS } #endif } // If it's the last one, return success if (i == 0) { FileObjectCopy (cwdptr, tempCWD); return 0; } } } #ifdef SUPPORT_LFN if(utfModeFileName) { unsigned short int *tempPtr1; unsigned short int *tempPtr2; k = 0; tempPtr1 = (unsigned short int *)&tempArray[0]; tempPtr2 = (unsigned short int *)&tempDirectoryString[0]; for(;;) { tempPtr2[k] = tempPtr1[k]; if(tempPtr2[k]) k++; else break; } } else #endif { strcpy(&tempDirectoryString[0],&tempArray[0]); } // Create a dir here if (!CreateDIR (tempDirectoryString)) { FileObjectCopy (cwdptr, tempCWD); return -1; } // Try to change to that directory if (FSchdir (tempArray)) { FileObjectCopy (cwdptr, tempCWD); FSerrno = CE_BADCACHEREAD; return -1; } #ifdef ALLOW_PGMFUNCTIONS if (mode == 1) { #ifdef SUPPORT_LFN if(utfModeFileName) { while (*utf16path2 == '\\') { utf16path2++; i = *utf16path2; } } else #endif { // Check for another backslash while (*temppath2 == '\\') { temppath2++; i = *temppath2; } } } else { #endif #ifdef SUPPORT_LFN if(utfModeFileName) { while (*utf16path == '\\') { utf16path++; i = *utf16path; } } else #endif { while (*temppath == '\\') { temppath++; i = *temppath; } } #ifdef ALLOW_PGMFUNCTIONS } #endif // Check to see if we're at the end of the path string if (i == 0) { // We already have one FileObjectCopy (cwdptr, tempCWD); return 0; } } } /************************************************************************** Function: int CreateDIR (char * path) Summary: FSmkdir helper function to create a directory Conditions: This function should not be called by the user. Input: path - The name of the dir to create Return Values: TRUE - Directory was created successfully FALSE - Directory could not be created. Side Effects: Any unwritten data in the data buffer or the FAT buffer will be written to the device. Description: The CreateDIR function is a helper function for the mkdirhelper function. The CreateDIR function will create a new file entry for a directory and assign a cluster to it. It will erase the cluster and write a dot and dotdot entry to it. Remarks: None. **************************************************************************/ int CreateDIR (char * path) { FSFILE * dirEntryPtr = &gFileTemp; DIRENTRY dir; WORD handle = 0; DWORD dot, dotdot; if (FormatDirName(path, dirEntryPtr,0) == FALSE) { FSerrno = CE_INVALID_FILENAME; return FALSE; } dirEntryPtr->dirclus = cwdptr->dirclus; dirEntryPtr->dirccls = cwdptr->dirccls; dirEntryPtr->cluster = 0; dirEntryPtr->ccls = 0; dirEntryPtr->dsk = cwdptr->dsk; // Create a directory entry if(CreateFileEntry(dirEntryPtr, &handle, DIRECTORY, TRUE) != CE_GOOD) { return FALSE; } else { if (gNeedFATWrite) if(WriteFAT (dirEntryPtr->dsk, 0, 0, TRUE)) { FSerrno = CE_WRITE_ERROR; return FALSE; } // Zero that cluster if (dirEntryPtr->dirclus == FatRootDirClusterValue) dotdot = 0; else dotdot = dirEntryPtr->dirclus; dirEntryPtr->dirccls = dirEntryPtr->dirclus; dir = Cache_File_Entry(dirEntryPtr, &handle, TRUE); if (dir == NULL) { FSerrno = CE_BADCACHEREAD; return FALSE; } // Get the cluster dot = GetFullClusterNumber(dir); // Get complete cluster number. if (writeDotEntries (dirEntryPtr->dsk, dot, dotdot)) return TRUE; else return FALSE; } } /*********************************************************************************** Function: BYTE writeDotEntries (DISK * disk, DWORD dotAddress, DWORD dotdotAddress) Summary: Create dot and dotdot entries in a non-root directory Conditions: This function should not be called by the user. Input: disk - The global disk structure dotAddress - The cluster the current dir is in dotdotAddress - The cluster the previous directory was in Return Values: TRUE - The dot and dotdot entries were created FALSE - The dot and dotdot entries could not be created in the new directory Side Effects: None Description: The writeDotEntries function will create and write dot and dotdot entries to a newly created directory. Remarks: None. ***********************************************************************************/ BYTE writeDotEntries (DISK * disk, DWORD dotAddress, DWORD dotdotAddress) { WORD i; WORD size; _DIRENTRY entry; DIRENTRY entryptr = &entry; DWORD sector; gBufferOwner = NULL; size = sizeof (_DIRENTRY); memset(disk->buffer, 0x00, disk->sectorSize); entry.DIR_Name[0] = '.'; for (i = 1; i < 11; i++) { entry.DIR_Name[i] = 0x20; } entry.DIR_Attr = ATTR_DIRECTORY; entry.DIR_NTRes = 0x00; entry.DIR_FstClusLO = (WORD)(dotAddress & 0x0000FFFF); // Lower 16 bit address #ifdef SUPPORT_FAT32 // If FAT32 supported. entry.DIR_FstClusHI = (WORD)((dotAddress & 0x0FFF0000)>> 16); // Higher 16 bit address. FAT32 uses only 28 bits. Mask even higher nibble also. #else // If FAT32 support not enabled entry.DIR_FstClusHI = 0; #endif entry.DIR_FileSize = 0x00; // Times need to be the same as the times in the directory entry // Set dir date for uncontrolled clock source #ifdef INCREMENTTIMESTAMP entry.DIR_CrtTimeTenth = 0xB2; entry.DIR_CrtTime = 0x7278; entry.DIR_CrtDate = 0x32B0; entry.DIR_LstAccDate = 0x0000; entry.DIR_WrtTime = 0x0000; entry.DIR_WrtDate = 0x0000; #endif #ifdef USEREALTIMECLOCK entry.DIR_CrtTimeTenth = gTimeCrtMS; // millisecond stamp entry.DIR_CrtTime = gTimeCrtTime; // time created // entry.DIR_CrtDate = gTimeCrtDate; // date created (1/1/2004) entry.DIR_LstAccDate = 0x0000; // Last Access date entry.DIR_WrtTime = 0x0000; // last update time entry.DIR_WrtDate = 0x0000; // last update date #endif #ifdef USERDEFINEDCLOCK entry.DIR_CrtTimeTenth = gTimeCrtMS; // millisecond stamp entry.DIR_CrtTime = gTimeCrtTime; // time created // entry.DIR_CrtDate = gTimeCrtDate; // date created (1/1/2004) entry.DIR_LstAccDate = 0x0000; // Last Access date entry.DIR_WrtTime = 0x0000; // last update time entry.DIR_WrtDate = 0x0000; // last update date #endif for (i = 0; i < size; i++) { *(disk->buffer + i) = *((char *)entryptr + i); } entry.DIR_Name[1] = '.'; entry.DIR_FstClusLO = (WORD)(dotdotAddress & 0x0000FFFF); // Lower 16 bit address #ifdef SUPPORT_FAT32 // If FAT32 supported. entry.DIR_FstClusHI = (WORD)((dotdotAddress & 0x0FFF0000)>> 16); // Higher 16 bit address. FAT32 uses only 28 bits. Mask even higher nibble also. #else // If FAT32 support not enabled entry.DIR_FstClusHI = 0; #endif for (i = 0; i < size; i++) { *(disk->buffer + i + size) = *((char *)entryptr + i); } sector = Cluster2Sector (disk, dotAddress); if (MDD_SectorWrite(sector, disk->buffer, FALSE) == FALSE) { FSerrno = CE_WRITE_ERROR; return FALSE; } return TRUE; } // This array is used to prevent a stack frame error #ifdef __18CXX char tempArray[13] = " "; #endif /************************************************************************** Function: int FSrmdir (char * path) Summary: Delete a directory as per the Ascii input path Conditions: None Input: path - The path of the directory to remove rmsubdirs - - TRUE - All sub-dirs and files in the target dir will be removed - FALSE - FSrmdir will not remove non-empty directories Return Values: 0 - The specified directory was deleted successfully EOF - The specified directory could not be deleted Side Effects: The FSerrno variable will be changed. Description: The FSrmdir function passes a RAM pointer to the path to the rmdirhelper function. Remarks: None. **************************************************************************/ int FSrmdir (char * path, unsigned char rmsubdirs) { return rmdirhelper (0, path, NULL, rmsubdirs); } /************************************************************************** Function: int wFSrmdir (unsigned short int * path, unsigned char rmsubdirs) Summary: Delete a directory as per the UTF16 input path Conditions: None Input: path - The path of the directory to remove rmsubdirs - - TRUE - All sub-dirs and files in the target dir will be removed - FALSE - FSrmdir will not remove non-empty directories Return Values: 0 - The specified directory was deleted successfully EOF - The specified directory could not be deleted Side Effects: The FSerrno variable will be changed. Description: The wFSrmdir function passes a RAM pointer to the path to the rmdirhelper function. Remarks: None. **************************************************************************/ #ifdef SUPPORT_LFN int wFSrmdir (unsigned short int * path, unsigned char rmsubdirs) { int result; utfModeFileName = TRUE; result = rmdirhelper (0, (char *)path, NULL, rmsubdirs); utfModeFileName = FALSE; return result; } #endif /************************************************************************** Function: int FSrmdirpgm (const rom char * path) Summary: Delete a directory with a path in ROM on PIC18 Conditions: None. Input: path - The path of the directory to remove (ROM) rmsubdirs - - TRUE - All sub-dirs and files in the target dir will be removed - FALSE - FSrmdir will not remove non-empty directories Return Values: 0 - The specified directory was deleted successfully EOF - The specified directory could not be deleted Side Effects: The FSerrno variable will be changed. Description: The FSrmdirpgm function passes a PIC18 ROM path pointer to the rmdirhelper function. Remarks: This function is for use with PIC18 when passing arguments in ROM. **************************************************************************/ #ifdef ALLOW_PGMFUNCTIONS int FSrmdirpgm (const rom char * path, unsigned char rmsubdirs) { return rmdirhelper (1, NULL, path, rmsubdirs); } #endif /************************************************************************** Function: int wFSrmdirpgm (const rom unsigned short int * path, unsigned char rmsubdirs) Summary: Delete a directory with a path in ROM on PIC18 Conditions: None. Input: path - The path of the directory to remove (ROM) rmsubdirs - - TRUE - All sub-dirs and files in the target dir will be removed - FALSE - FSrmdir will not remove non-empty directories Return Values: 0 - The specified directory was deleted successfully EOF - The specified directory could not be deleted Side Effects: The FSerrno variable will be changed. Description: The FSrmdirpgm function passes a PIC18 ROM path pointer to the rmdirhelper function. Remarks: This function is for use with PIC18 when passing arguments in ROM. **************************************************************************/ #ifdef ALLOW_PGMFUNCTIONS #ifdef SUPPORT_LFN int wFSrmdirpgm (const rom unsigned short int * path, unsigned char rmsubdirs) { int result; utfModeFileName = TRUE; result = rmdirhelper (1, NULL, (const char *)path, rmsubdirs); utfModeFileName = FALSE; return result; } #endif #endif /************************************************************************************************ Function: // PIC24/30/33/32 int rmdirhelper (BYTE mode, char * ramptr, char * romptr, unsigned char rmsubdirs) // PIC18 int rmdirhelper (BYTE mode, char * ramptr, const rom char * romptr, unsigned char rmsubdirs) Summary: Helper function for FSrmdir Conditions: This function should not be called by the user. Input: path - The path of the dir to delete rmsubdirs - - TRUE - Remove all sub-directories and files in the directory - FALSE - Non-empty directories can not be removed Return Values: 0 - The specified directory was successfully removed. EOF - The specified directory could not be removed. Side Effects: The FSerrno variable will be changed. Description: This helper function is used by the FSmkdir function. If the path argument is specified in ROM for PIC18 this function will be able to parse it correctly. This function will first change to the specified directory. If the rmsubdirs argument is FALSE the function will search through the directory to ensure that it is empty and then remove it. If the rmsubdirs argument is TRUE the function will also search through the directory for subdirectories or files. When the function finds a file, the file will be erased. When the function finds a subdirectory, it will switch to the subdirectory and begin removing all of the files in that subdirectory. Once the subdirectory is empty, the function will switch back to the original directory. return to the original position in that directory, and continue removing files. Once the specified directory is empty, the function will change to the parent directory, search through it for the directory to remove, and then erase that directory. Remarks: None. ************************************************************************************************/ #ifdef ALLOW_PGMFUNCTIONS int rmdirhelper (BYTE mode, char * ramptr, const rom char * romptr, unsigned char rmsubdirs) #else int rmdirhelper (BYTE mode, char * ramptr, char * romptr, unsigned char rmsubdirs) #endif { FILEOBJ tempCWD = &tempCWDobj; FILEOBJ fo = &gFileTemp; DIRENTRY entry; WORD handle = 0; WORD handle2; WORD subDirDepth; short int Index3 = 0; char Index, Index2; #if defined(SUPPORT_LFN) BOOL prevUtfModeFileName = utfModeFileName; char tempArray[514]; WORD prevHandle; LFN_ENTRY *lfno; FSFILE cwdTemp; UINT16_VAL tempShift; unsigned short int *tempLFN = (unsigned short int *)&tempArray[0]; BOOL forFirstTime; #else char tempArray[13]; #endif #ifndef __18CXX #else char dotdotname[] = ".."; char dotdotname1[5] = {'.','\0','.','\0','\0'}; #endif FSerrno = CE_GOOD; // Back up the current working directory FileObjectCopy (tempCWD, cwdptr); #ifdef ALLOW_PGMFUNCTIONS if (mode) { if (chdirhelper (1, NULL, romptr)) { FSerrno = CE_DIR_NOT_FOUND; return -1; } } else { #endif if (FSchdir (ramptr)) { FSerrno = CE_DIR_NOT_FOUND; return -1; } #ifdef ALLOW_PGMFUNCTIONS } #endif // Make sure we aren't trying to remove the root dir or the CWD if ((cwdptr->dirclus == FatRootDirClusterValue) || (cwdptr->dirclus == tempCWD->dirclus)) { FileObjectCopy (cwdptr, tempCWD); FSerrno = CE_INVALID_ARGUMENT; return -1; } handle++; entry = Cache_File_Entry (cwdptr, &handle, TRUE); if (entry == NULL) { FileObjectCopy (cwdptr, tempCWD); FSerrno = CE_BADCACHEREAD; return -1; } handle++; entry = Cache_File_Entry (cwdptr, &handle, FALSE); if (entry == NULL) { FileObjectCopy (cwdptr, tempCWD); FSerrno = CE_BADCACHEREAD; return -1; } // Don't remove subdirectories and sub-files if (!rmsubdirs) { while (entry->DIR_Name[0] != 0) { if ((unsigned char)entry->DIR_Name[0] != 0xE5) { FileObjectCopy (cwdptr, tempCWD); FSerrno = CE_DIR_NOT_EMPTY; return -1; } handle++; entry = Cache_File_Entry (cwdptr, &handle, FALSE); if ((entry == NULL)) { FileObjectCopy (cwdptr, tempCWD); FSerrno = CE_BADCACHEREAD; return -1; } } } else { // Do remove subdirectories and sub-files dirCleared = FALSE; subDirDepth = 0; #if defined(SUPPORT_LFN) tempCWD-> utf16LFNptr = (unsigned short int *)&tempArray[0]; fo-> utf16LFNptr = (unsigned short int *)&tempArray[0]; #endif while (!dirCleared) { if (entry->DIR_Name[0] != 0) { if (((unsigned char)entry->DIR_Name[0] != 0xE5) && (entry->DIR_Attr == ATTR_LONG_NAME)) { #if defined(SUPPORT_LFN) lfno = (LFN_ENTRY *)entry; if(lfno->LFN_SequenceNo & 0x40) { Index3 = (lfno->LFN_SequenceNo - 0x41) * 13; tempLFN[Index3 + 13] = 0x0000; forFirstTime = TRUE; } else { Index3 = (lfno->LFN_SequenceNo - 1) * 13; forFirstTime = FALSE; } tempShift.byte.LB = lfno->LFN_Part1[0]; tempShift.byte.HB = lfno->LFN_Part1[1]; tempLFN[Index3++] = tempShift.Val; tempShift.byte.LB = lfno->LFN_Part1[2]; tempShift.byte.HB = lfno->LFN_Part1[3]; tempLFN[Index3++] = tempShift.Val; tempShift.byte.LB = lfno->LFN_Part1[4]; tempShift.byte.HB = lfno->LFN_Part1[5]; tempLFN[Index3++] = tempShift.Val; tempShift.byte.LB = lfno->LFN_Part1[6]; tempShift.byte.HB = lfno->LFN_Part1[7]; tempLFN[Index3++] = tempShift.Val; tempShift.byte.LB = lfno->LFN_Part1[8]; tempShift.byte.HB = lfno->LFN_Part1[9]; tempLFN[Index3++] = tempShift.Val; tempLFN[Index3++] = lfno->LFN_Part2[0]; tempLFN[Index3++] = lfno->LFN_Part2[1]; tempLFN[Index3++] = lfno->LFN_Part2[2]; tempLFN[Index3++] = lfno->LFN_Part2[3]; tempLFN[Index3++] = lfno->LFN_Part2[4]; tempLFN[Index3++] = lfno->LFN_Part2[5]; tempLFN[Index3++] = lfno->LFN_Part3[0]; tempLFN[Index3] = lfno->LFN_Part3[1]; if(forFirstTime) { tempCWD->utf16LFNlength = Index3; for(Index = 12;Index >= 0;Index--) { if((tempLFN[Index3 - Index - 1]) == 0x0000) { tempCWD->utf16LFNlength = Index3 - Index; break; } } fo->utf16LFNlength = tempCWD->utf16LFNlength; } handle++; #endif } else if (((unsigned char)entry->DIR_Name[0] != 0xE5) && (entry->DIR_Attr != ATTR_VOLUME) && (entry->DIR_Attr != ATTR_LONG_NAME)) { if ((entry->DIR_Attr & ATTR_DIRECTORY) == ATTR_DIRECTORY) { // We have a directory subDirDepth++; #if defined(SUPPORT_LFN) if(tempCWD-> utf16LFNlength) { utfModeFileName = 1; Index = FSchdir(&tempArray[0]); utfModeFileName = prevUtfModeFileName; tempCWD-> utf16LFNlength = 0; fo-> utf16LFNlength = 0; } else #endif { for (Index = 0; (Index < DIR_NAMESIZE) && (entry->DIR_Name[(BYTE)Index] != 0x20); Index++) { tempArray[(BYTE)Index] = entry->DIR_Name[(BYTE)Index]; } if (entry->DIR_Name[8] != 0x20) { tempArray[(BYTE)Index++] = '.'; for (Index2 = 0; (Index2 < DIR_EXTENSION) && (entry->DIR_Name[Index2 + DIR_NAMESIZE] != 0x20); Index2++) { tempArray[(BYTE)Index++] = entry->DIR_Name[Index2 + DIR_NAMESIZE]; } } tempArray[(BYTE)Index] = 0; #ifdef SUPPORT_LFN utfModeFileName = 0; #endif Index = FSchdir(&tempArray[0]); #ifdef SUPPORT_LFN utfModeFileName = prevUtfModeFileName; #endif } // Change to the subdirectory if (Index) { FileObjectCopy (cwdptr, tempCWD); FSerrno = CE_DIR_NOT_FOUND; return -1; } else { // Make sure we're not trying to delete the CWD if (cwdptr->dirclus == tempCWD->dirclus) { FileObjectCopy (cwdptr, tempCWD); FSerrno = CE_INVALID_ARGUMENT; return -1; } } handle = 2; recache = TRUE; } else { #if defined(SUPPORT_LFN) if(!tempCWD-> utf16LFNlength) #endif { for (Index = 0; Index < 11; Index++) { fo->name[(BYTE)Index] = entry->DIR_Name[(BYTE)Index]; } } fo->dsk = &gDiskData; fo->entry = handle; fo->dirclus = cwdptr->dirclus; fo->dirccls = cwdptr->dirccls; fo->cluster = 0; fo->ccls = 0; if (FILEerase(fo, &handle, TRUE)) { #if defined(SUPPORT_LFN) tempCWD-> utf16LFNlength = 0; fo-> utf16LFNlength = 0; #endif FileObjectCopy (cwdptr, tempCWD); FSerrno = CE_ERASE_FAIL; return -1; } else { handle++; } #if defined(SUPPORT_LFN) tempCWD-> utf16LFNlength = 0; fo-> utf16LFNlength = 0; #endif } // Check to see if it's a DIR entry }// Check non-dir entry to see if its a valid file else { handle++; } if (recache) { recache = FALSE; cwdptr->dirccls = cwdptr->dirclus; entry = Cache_File_Entry (cwdptr, &handle, TRUE); } else { entry = Cache_File_Entry (cwdptr, &handle, FALSE); } if (entry == NULL) { #if defined(SUPPORT_LFN) tempCWD-> utf16LFNlength = 0; fo-> utf16LFNlength = 0; #endif FileObjectCopy (cwdptr, tempCWD); FSerrno = CE_BADCACHEREAD; return -1; } } else { #if defined(SUPPORT_LFN) tempCWD-> utf16LFNlength = 0; fo-> utf16LFNlength = 0; #endif // We have reached the end of the directory if (subDirDepth != 0) { handle2 = 0; cwdptr->dirccls = cwdptr->dirclus; entry = Cache_File_Entry (cwdptr, &handle2, TRUE); if (entry == NULL) { FileObjectCopy (cwdptr, tempCWD); FSerrno = CE_BADCACHEREAD; return -1; } // Get the cluster handle2 = GetFullClusterNumber(entry); // Get complete cluster number. #ifndef __18CXX #ifdef SUPPORT_LFN if(utfModeFileName) Index3 = FSchdir (".\0.\0\0"); else #endif Index3 = FSchdir (".."); #else #ifdef SUPPORT_LFN if(utfModeFileName) Index3 = FSchdir (dotdotname1); else #endif Index3 = FSchdir (dotdotname); #endif if(Index3) { FileObjectCopy (cwdptr, tempCWD); FSerrno = CE_DIR_NOT_FOUND; return -1; } // Return to our previous position in this directory handle = 2; cwdptr->dirccls = cwdptr->dirclus; entry = Cache_File_Entry (cwdptr, &handle, TRUE); if (entry == NULL) { FileObjectCopy (cwdptr, tempCWD); FSerrno = CE_BADCACHEREAD; return -1; } // Get the cluster TempClusterCalc = GetFullClusterNumber(entry); // Get complete cluster number. while ((TempClusterCalc != handle2) || ((TempClusterCalc == handle2) && (((unsigned char)entry->DIR_Name[0] == 0xE5) || (entry->DIR_Attr == ATTR_VOLUME)))) { handle++; entry = Cache_File_Entry (cwdptr, &handle, FALSE); if (entry == NULL) { FileObjectCopy (cwdptr, tempCWD); FSerrno = CE_BADCACHEREAD; return -1; } // Get the cluster TempClusterCalc = GetFullClusterNumber(entry); // Get complete cluster number in a loop. } Index3 = 0; #if defined(SUPPORT_LFN) FileObjectCopy (&cwdTemp, cwdptr); prevHandle = handle - 1; lfno = (LFN_ENTRY *)Cache_File_Entry (cwdptr, &prevHandle, FALSE); while((lfno->LFN_Attribute == ATTR_LONG_NAME) && (lfno->LFN_SequenceNo != DIR_DEL) && (lfno->LFN_SequenceNo != DIR_EMPTY)) { tempShift.byte.LB = lfno->LFN_Part1[0]; tempShift.byte.HB = lfno->LFN_Part1[1]; tempLFN[Index3++] = tempShift.Val; tempShift.byte.LB = lfno->LFN_Part1[2]; tempShift.byte.HB = lfno->LFN_Part1[3]; tempLFN[Index3++] = tempShift.Val; tempShift.byte.LB = lfno->LFN_Part1[4]; tempShift.byte.HB = lfno->LFN_Part1[5]; tempLFN[Index3++] = tempShift.Val; tempShift.byte.LB = lfno->LFN_Part1[6]; tempShift.byte.HB = lfno->LFN_Part1[7]; tempLFN[Index3++] = tempShift.Val; tempShift.byte.LB = lfno->LFN_Part1[8]; tempShift.byte.HB = lfno->LFN_Part1[9]; tempLFN[Index3++] = tempShift.Val; tempLFN[Index3++] = lfno->LFN_Part2[0]; tempLFN[Index3++] = lfno->LFN_Part2[1]; tempLFN[Index3++] = lfno->LFN_Part2[2]; tempLFN[Index3++] = lfno->LFN_Part2[3]; tempLFN[Index3++] = lfno->LFN_Part2[4]; tempLFN[Index3++] = lfno->LFN_Part2[5]; tempLFN[Index3++] = lfno->LFN_Part3[0]; tempLFN[Index3++] = lfno->LFN_Part3[1]; prevHandle = prevHandle - 1; lfno = (LFN_ENTRY *)Cache_File_Entry (cwdptr, &prevHandle, FALSE); } FileObjectCopy (cwdptr, &cwdTemp); #endif if(Index3 == 0) { memset (tempArray, 0x00, 12); for (Index = 0; Index < 11; Index++) { tempArray[(BYTE)Index] = entry->DIR_Name[(BYTE)Index]; } #if defined(SUPPORT_LFN) cwdptr->utf16LFNlength = 0; #endif } #if defined(SUPPORT_LFN) else { cwdptr->utf16LFNlength = Index3; for(Index = 12;Index >= 0;Index--) { if((tempLFN[Index3 - Index - 1]) == 0x0000) { cwdptr->utf16LFNlength = Index3 - Index; break; } } cwdptr->utf16LFNptr = (unsigned short int *)&tempArray[0]; } #endif // Erase the directory that we just cleared the subdirectories out of if (eraseDir (&tempArray[0])) { FileObjectCopy (cwdptr, tempCWD); FSerrno = CE_ERASE_FAIL; return -1; } else { handle++; cwdptr->dirccls = cwdptr->dirclus; entry = Cache_File_Entry (cwdptr, &handle, TRUE); if (entry == NULL) { FileObjectCopy (cwdptr, tempCWD); FSerrno = CE_BADCACHEREAD; return -1; } } // Decrease the subdirectory depth subDirDepth--; } else { dirCleared = TRUE; } // Check subdirectory depth } // Check until we get an empty entry } // Loop until the whole dir is cleared } // Cache the current directory name // tempArray is used so we don't disturb the // global getcwd buffer if (FSgetcwd (&tempArray[0], 2) == NULL) { FileObjectCopy (cwdptr, tempCWD); return -1; } else { #if defined(SUPPORT_LFN) if(!cwdptr->utf16LFNlength) #endif { memset (tempArray, 0x00, 12); for (Index = 0; Index < 11; Index++) { tempArray[(BYTE)Index] = cwdptr->name[(BYTE)Index]; } } } // If we're here, this directory is empty #ifndef __18CXX #ifdef SUPPORT_LFN if(utfModeFileName) Index3 = FSchdir (".\0.\0\0"); else #endif Index3 = FSchdir (".."); #else #ifdef SUPPORT_LFN if(utfModeFileName) Index3 = FSchdir (dotdotname1); else #endif Index3 = FSchdir (dotdotname); #endif if(Index3) { FileObjectCopy (cwdptr, tempCWD); FSerrno = CE_DIR_NOT_FOUND; return -1; } #if defined(SUPPORT_LFN) if(cwdptr->utf16LFNlength) { Index3 = eraseDir((char *)cwdptr->utf16LFNptr); } else #endif { Index3 = eraseDir(tempArray); } if (Index3) { FileObjectCopy (cwdptr, tempCWD); FSerrno = CE_ERASE_FAIL; return -1; } else { FileObjectCopy (cwdptr, tempCWD); return 0; } } /**************************************************************** Function: int eraseDir (char * path) Summary: FSrmdir helper function to erase dirs Conditions: This function should not be called by the user. Input: path - The name of the directory to delete Return Values: 0 - Dir was deleted successfully -1 - Dir could not be deleted. Side Effects: None Description: The eraseDir function is a helper function for the rmdirhelper function. The eraseDir function will search for the directory that matches the specified path name and then erase it with the FILEerase function. Remarks: None. *****************************************************************/ int eraseDir (char * path) { int result; BYTE Index; FSFILE tempCWDobj2; if (MDD_WriteProtectState()) { return (-1); } // preserve CWD FileObjectCopy(&tempCWDobj2, cwdptr); // If long file name not present, copy the 8.3 name in cwdptr #if defined(SUPPORT_LFN) if(!cwdptr->utf16LFNlength) #endif { for (Index = 0; Index <11; Index++) { cwdptr->name[Index] = *(path + Index); } } // copy file object over FileObjectCopy(&gFileTemp, cwdptr); // See if the file is found if(FILEfind (cwdptr, &gFileTemp, LOOK_FOR_MATCHING_ENTRY, 0) == CE_GOOD) { if(FILEerase(cwdptr, &cwdptr->entry, TRUE) == CE_GOOD) result = 0; else result = -1; } else result = -1; FileObjectCopy(cwdptr, &tempCWDobj2); return(result); } #endif #endif #ifdef ALLOW_FILESEARCH /*********************************************************************************** Function: int FindFirst (const char * fileName, unsigned int attr, SearchRec * rec) Summary: Initial search function for the input Ascii fileName Conditions: None Input: fileName - The name to search for - Parital string search characters - * - Indicates the rest of the filename or extension can vary (e.g. FILE.*) - ? - Indicates that one character in a filename can vary (e.g. F?LE.T?T) attr - The attributes that a found file may have - ATTR_READ_ONLY - File may be read only - ATTR_HIDDEN - File may be a hidden file - ATTR_SYSTEM - File may be a system file - ATTR_VOLUME - Entry may be a volume label - ATTR_DIRECTORY - File may be a directory - ATTR_ARCHIVE - File may have archive attribute - ATTR_MASK - All attributes rec - pointer to a structure to put the file information in Return Values: 0 - File was found -1 - No file matching the specified criteria was found Side Effects: Search criteria from previous FindFirst call on passed SearchRec object will be lost. "utf16LFNfound" is overwritten after subsequent FindFirst/FindNext operations.It is the responsibility of the application to read the "utf16LFNfound" before it is lost.The FSerrno variable will be changed. Description: The FindFirst function will search for a file based on parameters passed in by the user. This function will use the FILEfind function to parse through the current working directory searching for entries that match the specified parameters. If a file is found, its parameters are copied into the SearchRec structure, as are the initial parameters passed in by the user and the position of the file entry in the current working directory.If the return value of the function is 0 then "utf16LFNfoundLength" indicates whether the file found was long file name or short file name(8P3 format). The "utf16LFNfoundLength" is non-zero for long file name and is zero for 8P3 format."utf16LFNfound" points to the address of long file name if found during the operation. Remarks: Call FindFirst or FindFirstpgm before calling FindNext ***********************************************************************************/ int FindFirst (const char * fileName, unsigned int attr, SearchRec * rec) { FSFILE f; FILEOBJ fo = &f; WORD fHandle; BYTE j; BYTE Index; #ifdef SUPPORT_LFN short int indexLFN; #endif FSerrno = CE_GOOD; #ifdef SUPPORT_LFN fo->utf16LFNptr = &recordSearchName[0]; rec->utf16LFNfound = &recordFoundName[0]; #endif // Format the file name as per 8.3 format or LFN format if( !FormatFileName(fileName, fo, 1) ) { FSerrno = CE_INVALID_FILENAME; return -1; } rec->initialized = FALSE; #if defined(SUPPORT_LFN) rec->AsciiEncodingType = fo->AsciiEncodingType; recordSearchLength = fo->utf16LFNlength; // If file name is 8.3 format copy it in 'searchname' string if(!recordSearchLength) #endif { for (Index = 0; (Index < 12) && (fileName[Index] != 0); Index++) { rec->searchname[Index] = fileName[Index]; } for (;Index < FILE_NAME_SIZE_8P3 + 2; Index++) { rec->searchname[Index] = 0; } } rec->searchattr = attr; #ifdef ALLOW_DIRS rec->cwdclus = cwdptr->dirclus; #else rec->cwdclus = FatRootDirClusterValue; #endif fo->dsk = &gDiskData; fo->cluster = 0; fo->ccls = 0; fo->entry = 0; fo->attributes = attr; #ifndef ALLOW_DIRS // start at the root directory fo->dirclus = FatRootDirClusterValue; fo->dirccls = FatRootDirClusterValue; #else fo->dirclus = cwdptr->dirclus; fo->dirccls = cwdptr->dirccls; #endif // copy file object over FileObjectCopy(&gFileTemp, fo); // See if the file is found if (FILEfind (fo, &gFileTemp,LOOK_FOR_MATCHING_ENTRY, 1) != CE_GOOD) { FSerrno = CE_FILE_NOT_FOUND; return -1; } fHandle = fo->entry; if (FILEopen (fo, &fHandle, 'r') == CE_GOOD) { #if defined(SUPPORT_LFN) rec->utf16LFNfoundLength = fo->utf16LFNlength; if(fo->utf16LFNlength) { indexLFN = fo->utf16LFNlength; recordFoundName[indexLFN] = 0x0000; while(indexLFN--) recordFoundName[indexLFN] = fileFoundString[indexLFN]; } #endif for(j = 0; j < FILE_NAME_SIZE_8P3 + 2 ; j++) { rec->filename[j] = 0; } // Copy as much name as there is if (fo->attributes != ATTR_VOLUME) { for (Index = 0, j = 0; (j < 8) && (fo->name[j] != 0x20); Index++, j++) { rec->filename[Index] = fo->name[j]; } if(fo->name[8] != 0x20) { rec->filename[Index++] = '.'; // Move to the extension, even if there are more space chars for (j = 8; (j < 11) && (fo->name[j] != 0x20); Index++, j++) { rec->filename[Index] = fo->name[j]; } } } else { for (Index = 0; Index < DIR_NAMECOMP; Index++) { rec->filename[Index] = fo->name[Index]; } } rec->attributes = fo->attributes; rec->filesize = fo->size; rec->timestamp = (DWORD)((DWORD)fo->date << 16) + fo->time; rec->entry = fo->entry; rec->initialized = TRUE; return 0; } else { FSerrno = CE_BADCACHEREAD; return -1; } } /********************************************************************** Function: int FindNext (SearchRec * rec) Summary: Sequential search function Conditions: None Input: rec - The structure to store the file information in Return Values: 0 - File was found -1 - No additional files matching the specified criteria were found Side Effects: Search criteria from previous FindNext call on passed SearchRec object will be lost. "utf16LFNfound" is overwritten after subsequent FindFirst/FindNext operations.It is the responsibility of the application to read the "utf16LFNfound" before it is lost.The FSerrno variable will be changed. Description: The FindNext function performs the same function as the FindFirst funciton, except it does not copy any search parameters into the SearchRec structure (only info about found files) and it begins searching at the last directory entry offset at which a file was found, rather than at the beginning of the current working directory.If the return value of the function is 0 then "utf16LFNfoundLength" indicates whether the file found was long file name or short file name(8P3 format). The "utf16LFNfoundLength" is non-zero for long file name and is zero for 8P3 format."utf16LFNfound" points to the address of long file name if found during the operation. Remarks: Call FindFirst or FindFirstpgm before calling this function **********************************************************************/ int FindNext (SearchRec * rec) { FSFILE f; FILEOBJ fo = &f; BYTE i, j; #ifdef SUPPORT_LFN short int indexLFN; #endif FSerrno = CE_GOOD; // Make sure we called FindFirst on this object if (rec->initialized == FALSE) { FSerrno = CE_NOT_INIT; return -1; } // Make sure we called FindFirst in the cwd #ifdef ALLOW_DIRS if (rec->cwdclus != cwdptr->dirclus) { FSerrno = CE_INVALID_ARGUMENT; return -1; } #endif #if defined(SUPPORT_LFN) fo->AsciiEncodingType = rec->AsciiEncodingType; fo->utf16LFNlength = recordSearchLength; if(fo->utf16LFNlength) { fo->utf16LFNptr = &recordSearchName[0]; } else #endif { // Format the file name if( !FormatFileName(rec->searchname, fo, 1) ) { FSerrno = CE_INVALID_FILENAME; return -1; } } /* Brn: Copy the formatted name to "fo" which is necesary before calling "FILEfind" function */ //strcpy(fo->name,rec->searchname); fo->dsk = &gDiskData; fo->cluster = 0; fo->ccls = 0; fo->entry = rec->entry + 1; fo->attributes = rec->searchattr; #ifndef ALLOW_DIRS // start at the root directory fo->dirclus = FatRootDirClusterValue; fo->dirccls = FatRootDirClusterValue; #else fo->dirclus = cwdptr->dirclus; fo->dirccls = cwdptr->dirccls; #endif // copy file object over FileObjectCopy(&gFileTemp, fo); // See if the file is found if (CE_GOOD != FILEfind (fo, &gFileTemp,LOOK_FOR_MATCHING_ENTRY, 1)) { FSerrno = CE_FILE_NOT_FOUND; return -1; } else { #if defined(SUPPORT_LFN) rec->utf16LFNfoundLength = fo->utf16LFNlength; if(fo->utf16LFNlength) { indexLFN = fo->utf16LFNlength; recordFoundName[indexLFN] = 0x0000; while(indexLFN--) recordFoundName[indexLFN] = fileFoundString[indexLFN]; } #endif for(j = 0; j < FILE_NAME_SIZE_8P3 + 2 ; j++) { rec->filename[j] = 0; } if (fo->attributes != ATTR_VOLUME) { for (i = 0, j = 0; (j < 8) && (fo->name[j] != 0x20); i++, j++) { rec->filename[i] = fo->name[j]; } if(fo->name[8] != 0x20) { rec->filename[i++] = '.'; // Move to the extension, even if there are more space chars for (j = 8; (j < 11) && (fo->name[j] != 0x20); i++, j++) { rec->filename[i] = fo->name[j]; } } } else { for (i = 0; i < DIR_NAMECOMP; i++) { rec->filename[i] = fo->name[i]; } } rec->attributes = fo->attributes; rec->filesize = fo->size; rec->timestamp = (DWORD)((DWORD)fo->date << 16) + fo->time; rec->entry = fo->entry; return 0; } } /*********************************************************************************** Function: int wFindFirst (const unsigned short int * fileName, unsigned int attr, SearchRec * rec) Summary: Initial search function for the input UTF16 fileName Conditions: None Input: fileName - The name to search for - Parital string search characters - * - Indicates the rest of the filename or extension can vary (e.g. FILE.*) - ? - Indicates that one character in a filename can vary (e.g. F?LE.T?T) attr - The attributes that a found file may have - ATTR_READ_ONLY - File may be read only - ATTR_HIDDEN - File may be a hidden file - ATTR_SYSTEM - File may be a system file - ATTR_VOLUME - Entry may be a volume label - ATTR_DIRECTORY - File may be a directory - ATTR_ARCHIVE - File may have archive attribute - ATTR_MASK - All attributes rec - pointer to a structure to put the file information in Return Values: 0 - File was found -1 - No file matching the specified criteria was found Side Effects: Search criteria from previous wFindFirst call on passed SearchRec object will be lost. "utf16LFNfound" is overwritten after subsequent wFindFirst/FindNext operations.It is the responsibility of the application to read the "utf16LFNfound" before it is lost.The FSerrno variable will be changed. Description: The wFindFirst function will search for a file based on parameters passed in by the user. This function will use the FILEfind function to parse through the current working directory searching for entries that match the specified parameters. If a file is found, its parameters are copied into the SearchRec structure, as are the initial parameters passed in by the user and the position of the file entry in the current working directory.If the return value of the function is 0 then "utf16LFNfoundLength" indicates whether the file found was long file name or short file name(8P3 format). The "utf16LFNfoundLength" is non-zero for long file name and is zero for 8P3 format."utf16LFNfound" points to the address of long file name if found during the operation. Remarks: Call FindFirst or FindFirstpgm before calling FindNext ***********************************************************************************/ #ifdef SUPPORT_LFN int wFindFirst (const unsigned short int * fileName, unsigned int attr, SearchRec * rec) { int result; utfModeFileName = TRUE; result = FindFirst ((const char *)fileName,attr,rec); utfModeFileName = FALSE; return result; } #endif #endif #ifdef ALLOW_FSFPRINTF /********************************************************************** Function: int FSputc (char c, FSFILE * file) Summary: FSfprintf helper function to write a char Conditions: This function should not be called by the user. Input: c - The character to write to the file. file - The file to write to. Return Values: 0 - The character was written successfully EOF - The character was not written to the file. Side Effects: None Description: This is a helper function for FSfprintf. It will write one character to a file. Remarks: None **********************************************************************/ int FSputc (char c, FSFILE * file) { if (FSfwrite ((void *)&c, 1, 1, file) != 1) return EOF; else return 0; } /********************************************************************** Function: int str_put_n_chars (FSFILE * handle, unsigned char n, char c) Summary: FSfprintf helper function to write a char multiple times Conditions: This function should not be called by the user. Input: handle - The file to write to. n - The number of times to write that character to a file. c - The character to write to the file. Return Values: 0 - The characters were written successfully EOF - The characters were not written to the file. Side Effects: None Description: This funciton is used by the FSfprintf function to write multiple instances of a single character to a file (for example, when padding a format specifier with leading spacez or zeros). Remarks: None. **********************************************************************/ unsigned char str_put_n_chars (FSFILE * handle, unsigned char n, char c) { while (n--) if (FSputc (c, handle) == EOF) return 1; return 0; } /********************************************************************** Function: // PIC24/30/33/32 int FSfprintf (FSFILE * fptr, const char * fmt, ...) // PIC18 int FSfpritnf (FSFILE * fptr, const rom char * fmt, ...) Summary: Function to write formatted strings to a file Conditions: For PIC18, integer promotion must be enabled in the project build options menu. File opened in a write mode. Input: fptr - A pointer to the file to write to. fmt - A string of characters and format specifiers to write to the file ... - Additional arguments inserted in the string by format specifiers Returns: The number of characters written to the file Side Effects: The FSerrno variable will be changed. Description: Writes a specially formatted string to a file. Remarks: Consult AN1045 for a full description of how to use format specifiers. **********************************************************************/ #ifdef __18CXX int FSfprintf (FSFILE *fptr, const rom char *fmt, ...) #else int FSfprintf (FSFILE *fptr, const char * fmt, ...) #endif { va_list ap; int n; va_start (ap, fmt); n = FSvfprintf (fptr, fmt, ap); va_end (ap); return n; } /********************************************************************** Function: // PIC24/30/33/32 int FSvfprintf (FSFILE * handle, const char * formatString, va_list ap) // PIC18 int FSvfpritnf (auto FSFILE * handle, auto const rom char * formatString, auto va_list ap) Summary: Helper function for FSfprintf Conditions: This function should not be called by the user. Input: handle - A pointer to the file to write to. formatString - A string of characters and format specifiers to write to the file ap - A structure pointing to the arguments on the stack Returns: The number of characters written to the file Side Effects: The FSerrno variable will be changed. Description: This helper function will access the elements passed to FSfprintf Remarks: Consult AN1045 for a full description of how to use format specifiers. **********************************************************************/ #ifdef __18CXX int FSvfprintf (auto FSFILE *handle, auto const rom char * formatString, auto va_list ap) #else int FSvfprintf (FSFILE *handle, const char * formatString, va_list ap) #endif { unsigned char c; int count = 0; for (c = *formatString; c; c = *++formatString) { if (c == '%') { unsigned char flags = 0; unsigned char width = 0; unsigned char precision = 0; unsigned char have_precision = 0; unsigned char size = 0; #ifndef __18CXX unsigned char size2 = 0; #endif unsigned char space_cnt; unsigned char cval; #ifdef __18CXX unsigned long larg; far rom char * romstring; #else unsigned long long larg; #endif char * ramstring; int n; FSerrno = CE_GOOD; c = *++formatString; while ((c == '-') || (c == '+') || (c == ' ') || (c == '#') || (c == '0')) { switch (c) { case '-': flags |= _FLAG_MINUS; break; case '+': flags |= _FLAG_PLUS; break; case ' ': flags |= _FLAG_SPACE; break; case '#': flags |= _FLAG_OCTO; break; case '0': flags |= _FLAG_ZERO; break; } c = *++formatString; } /* the optional width field is next */ if (c == '*') { n = va_arg (ap, int); if (n < 0) { flags |= _FLAG_MINUS; width = -n; } else width = n; c = *++formatString; } else { cval = 0; while ((unsigned char) isdigit (c)) { cval = cval * 10 + c - '0'; c = *++formatString; } width = cval; } /* if '-' is specified, '0' is ignored */ if (flags & _FLAG_MINUS) flags &= ~_FLAG_ZERO; /* the optional precision field is next */ if (c == '.') { c = *++formatString; if (c == '*') { n = va_arg (ap, int); if (n >= 0) { precision = n; have_precision = 1; } c = *++formatString; } else { cval = 0; while ((unsigned char) isdigit (c)) { cval = cval * 10 + c - '0'; c = *++formatString; } precision = cval; have_precision = 1; } } /* the optional 'h' specifier. since int and short int are the same size for MPLAB C18, this is a NOP for us. */ if (c == 'h') { c = *++formatString; /* if 'c' is another 'h' character, this is an 'hh' specifier and the size is 8 bits */ if (c == 'h') { size = _FMT_BYTE; c = *++formatString; } } else if ((c == 't') || (c == 'z')) c = *++formatString; #ifdef __18CXX else if ((c == 'H') || (c == 'T') || (c == 'Z')) { size = _FMT_SHRTLONG; c = *++formatString; } else if ((c == 'l') || (c == 'j')) #else else if ((c == 'q') || (c == 'j')) { size = _FMT_LONGLONG; c = *++formatString; } else if (c == 'l') #endif { size = _FMT_LONG; c = *++formatString; } switch (c) { case '\0': /* this is undefined behaviour. we have a trailing '%' character in the string, perhaps with some flags, width, precision stuff as well, but no format specifier. We'll, arbitrarily, back up a character so that the loop will terminate properly when it loops back and we'll output a '%' character. */ --formatString; /* fallthrough */ case '%': if (FSputc ('%', handle) == EOF) { FSerrno = CE_WRITE_ERROR; return EOF; } ++count; break; case 'c': space_cnt = 0; if (width > 1) { space_cnt = width - 1; count += space_cnt; } if (space_cnt && !(flags & _FLAG_MINUS)) { if (str_put_n_chars (handle, space_cnt, ' ')) { FSerrno = CE_WRITE_ERROR; return EOF; } space_cnt = 0; } c = va_arg (ap, int); if (FSputc (c, handle) == EOF) { FSerrno = CE_WRITE_ERROR; return EOF; } ++count; if (str_put_n_chars (handle, space_cnt, ' ')) { FSerrno = CE_WRITE_ERROR; return EOF; } break; case 'S': #ifdef __18CXX if (size == _FMT_SHRTLONG) romstring = va_arg (ap, rom far char *); else romstring = (far rom char*)va_arg (ap, rom near char *); n = strlenpgm (romstring); /* Normalize the width based on the length of the actual string and the precision. */ if (have_precision && precision < (unsigned char) n) n = precision; if (width < (unsigned char) n) width = n; space_cnt = width - (unsigned char) n; count += space_cnt; /* we've already calculated the space count that the width will require. now we want the width field to have the number of character to display from the string itself, limited by the length of the actual string and the specified precision. */ if (have_precision && precision < width) width = precision; /* if right justified, we print the spaces before the string */ if (!(flags & _FLAG_MINUS)) { if (str_put_n_chars (handle, space_cnt, ' ')) { FSerrno = CE_WRITE_ERROR; return EOF; } space_cnt = 0; } cval = 0; for (c = *romstring; c && cval < width; c = *++romstring) { if (FSputc (c, handle) == EOF) { FSerrno = CE_WRITE_ERROR; return EOF; } ++count; ++cval; } /* If there are spaces left, it's left justified. Either way, calling the function unconditionally is smaller code. */ if (str_put_n_chars (handle, space_cnt, ' ')) { FSerrno = CE_WRITE_ERROR; return EOF; } break; #endif case 's': ramstring = va_arg (ap, char *); n = strlen (ramstring); /* Normalize the width based on the length of the actual string and the precision. */ if (have_precision && precision < (unsigned char) n) n = precision; if (width < (unsigned char) n) width = n; space_cnt = width - (unsigned char) n; count += space_cnt; /* we've already calculated the space count that the width will require. now we want the width field to have the number of character to display from the string itself, limited by the length of the actual string and the specified precision. */ if (have_precision && precision < width) width = precision; /* if right justified, we print the spaces before the string */ if (!(flags & _FLAG_MINUS)) { if (str_put_n_chars (handle, space_cnt, ' ')) { FSerrno = CE_WRITE_ERROR; return EOF; } space_cnt = 0; } cval = 0; for (c = *ramstring; c && cval < width; c = *++ramstring) { if (FSputc (c, handle) == EOF) { FSerrno = CE_WRITE_ERROR; return EOF; } ++count; ++cval; } /* If there are spaces left, it's left justified. Either way, calling the function unconditionally is smaller code. */ if (str_put_n_chars (handle, space_cnt, ' ')) { FSerrno = CE_WRITE_ERROR; return EOF; } break; case 'd': case 'i': flags |= _FLAG_SIGNED; /* fall through */ case 'o': case 'u': case 'x': case 'X': case 'b': case 'B': /* This is a bit of a trick. The 'l' and 'hh' size specifiers are valid only for the integer conversions, not the 'p' or 'P' conversions, and are ignored for the latter. By jumping over the additional size specifier checks here we get the best code size since we can limit the size checks in the remaining code. */ if (size == _FMT_LONG) { if (flags & _FLAG_SIGNED) larg = va_arg (ap, long int); else larg = va_arg (ap, unsigned long int); goto _do_integer_conversion; } else if (size == _FMT_BYTE) { if (flags & _FLAG_SIGNED) larg = (signed char) va_arg (ap, int); else larg = (unsigned char) va_arg (ap, unsigned int); goto _do_integer_conversion; } #ifndef __18CXX else if (size == _FMT_LONGLONG) { if (flags & _FLAG_SIGNED) larg = (signed long long)va_arg (ap, long long); else larg = (unsigned long long) va_arg (ap, unsigned long long); goto _do_integer_conversion; } #endif /* fall trough */ case 'p': case 'P': #ifdef __18CXX if (size == _FMT_SHRTLONG) { if (flags & _FLAG_SIGNED) larg = va_arg (ap, short long int); else larg = va_arg (ap, unsigned short long int); } else #endif if (flags & _FLAG_SIGNED) larg = va_arg (ap, int); else larg = va_arg (ap, unsigned int); _do_integer_conversion: /* default precision is 1 */ if (!have_precision) precision = 1; { unsigned char digit_cnt = 0; unsigned char prefix_cnt = 0; unsigned char sign_char; /* A 32 bit number will require at most 32 digits in the string representation (binary format). */ #ifdef __18CXX char buf[33]; /* Start storing digits least-significant first */ char *q = &buf[31]; /* null terminate the string */ buf[32] = '\0'; #else char buf[65]; char *q = &buf[63]; buf[64] = '\0'; #endif space_cnt = 0; size = 10; switch (c) { case 'b': case 'B': size = 2; #ifndef __18CXX size2 = 1; #endif break; case 'o': size = 8; #ifndef __18CXX size2 = 3; #endif break; case 'p': case 'P': /* from here on out, treat 'p' conversions just like 'x' conversions. */ c += 'x' - 'p'; /* fall through */ case 'x': case 'X': size = 16; #ifndef __18CXX size2 = 4; #endif break; }// switch (c) /* if it's an unsigned conversion, we should ignore the ' ' and '+' flags */ if (!(flags & _FLAG_SIGNED)) flags &= ~(_FLAG_PLUS | _FLAG_SPACE); /* if it's a negative value, we need to negate the unsigned version before we convert to text. Using unsigned for this allows us to (ab)use the 2's complement system to avoid overflow and be able to adequately handle LONG_MIN. We'll figure out what sign character to print, if any, here as well. */ #ifdef __18CXX if (flags & _FLAG_SIGNED && ((long) larg < 0)) { larg = -(long) larg; #else if (flags & _FLAG_SIGNED && ((long long) larg < 0)) { larg = -(long long) larg; #endif sign_char = '-'; ++digit_cnt; } else if (flags & _FLAG_PLUS) { sign_char = '+'; ++digit_cnt; } else if (flags & _FLAG_SPACE) { sign_char = ' '; ++digit_cnt; } else sign_char = '\0'; /* get the digits for the actual number. If the precision is zero and the value is zero, the result is no characters. */ if (precision || larg) { do { #ifdef __18CXX cval = s_digits[larg % size]; if ((c == 'X') && (cval >= 'a')) cval -= 'a' - 'A'; larg /= size; #else // larg is congruent mod size2 to its lower 16 bits // for size2 = 2^n, 0 <= n <= 4 if (size2 != 0) cval = s_digits[(unsigned int) larg % size]; else cval = s_digits[larg % size]; if ((c == 'X') && (cval >= 'a')) cval -= 'a' - 'A'; if (size2 != 0) larg = larg >> size2; else larg /= size; #endif *q-- = cval; ++digit_cnt; } while (larg); /* if the '#' flag was specified and we're dealing with an 'o', 'b', 'B', 'x', or 'X' conversion, we need a bit more. */ if (flags & _FLAG_OCTO) { if (c == 'o') { /* per the standard, for octal, the '#' flag makes the precision be at least one more than the number of digits in the number */ if (precision <= digit_cnt) precision = digit_cnt + 1; } else if ((c == 'x') || (c == 'X') || (c == 'b') || (c == 'B')) prefix_cnt = 2; } } else digit_cnt = 0; /* The leading zero count depends on whether the '0' flag was specified or not. If it was not, then the count is the difference between the specified precision and the number of digits (including the sign character, if any) to be printed; otherwise, it's as if the precision were equal to the max of the specified precision and the field width. If a precision was specified, the '0' flag is ignored, however. */ if ((flags & _FLAG_ZERO) && (width > precision) && !have_precision) precision = width; /* for the rest of the processing, precision contains the leading zero count for the conversion. */ if (precision > digit_cnt) precision -= digit_cnt; else precision = 0; /* the space count is the difference between the field width and the digit count plus the leading zero count. If the width is less than the digit count plus the leading zero count, the space count is zero. */ if (width > precision + digit_cnt + prefix_cnt) space_cnt = width - precision - digit_cnt - prefix_cnt; /* for output, we check the justification, if it's right justified and the space count is positive, we emit the space characters first. */ if (!(flags & _FLAG_MINUS) && space_cnt) { if (str_put_n_chars (handle, space_cnt, ' ')) { FSerrno = CE_WRITE_ERROR; return EOF; } count += space_cnt; space_cnt = 0; } /* if we have a sign character to print, that comes next */ if (sign_char) if (FSputc (sign_char, handle) == EOF) { FSerrno = CE_WRITE_ERROR; return EOF; } /* if we have a prefix (0b, 0B, 0x or 0X), that's next */ if (prefix_cnt) { if (FSputc ('0', handle) == EOF) { FSerrno = CE_WRITE_ERROR; return EOF; } if (FSputc (c, handle) == EOF) { FSerrno = CE_WRITE_ERROR; return EOF; } } /* if we have leading zeros, they follow. the prefix, if any is included in the number of digits when determining how many leading zeroes are needed. */ // if (precision > prefix_cnt) // precision -= prefix_cnt; if (str_put_n_chars (handle, precision, '0')) { FSerrno = CE_WRITE_ERROR; return EOF; } /* print the actual number */ for (cval = *++q; cval; cval = *++q) if (FSputc (cval, handle) == EOF) { FSerrno = CE_WRITE_ERROR; return EOF; } /* if there are any spaces left, they go to right-pad the field */ if (str_put_n_chars (handle, space_cnt, ' ')) { FSerrno = CE_WRITE_ERROR; return EOF; } count += precision + digit_cnt + space_cnt + prefix_cnt; } break; case 'n': switch (size) { case _FMT_LONG: *(long *) va_arg (ap, long *) = count; break; #ifdef __18CXX case _FMT_SHRTLONG: *(short long *) va_arg (ap, short long *) = count; break; #else case _FMT_LONGLONG: *(long long *) va_arg (ap, long long *) = count; break; #endif case _FMT_BYTE: *(signed char *) va_arg (ap, signed char *) = count; break; default: *(int *) va_arg (ap, int *) = count; break; } break; default: /* undefined behaviour. we do nothing */ break; } } else { if (FSputc (c, handle) == EOF) { FSerrno = CE_WRITE_ERROR; return EOF; } ++count; } } return count; } #endif